The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   67-72 Chevrolet & GMC Pickups Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=115)
-   -   jimbosprint 1972 C20 - the good, the bad, and the ugly (https://67-72chevytrucks.com/vboard/showthread.php?t=636927)

jimbosprint 09-09-2019 04:07 PM

Re: jimbosprint 1972 C20 - the good, the bad, and the ugly
 
2 Attachment(s)
I have a list of little things that had been bugging me, and a mechanic friend offered to take a look at my truck to see if he could help.

Speedometer inaccurate - Changed the gear, not perfect but much closer.

Shifter linkage funky - Can't figure out why. Bushings are there and nothing is obviously wrong. Maybe in steering column?

Starter had been giving me trouble (not working) when it got hot - replaced it with a mini starter. The gear was just slightly hitting the flexplate and making a terrible noise. We ended up grinding down the end of the gear to make clearance, and it seems to have resolved the problem.

Bad mileage - Tuning, plugs, carb, distributor all seemed fine to him. Recommends turning the fuel pressure down to 4.5psi. Additionally recommended 4spd 700r4 transmission and Sniper EFI.

AC cycling on/off - He didn't want to work on it. System needs to be dismantled and refilled with proper compressor oil, and reinstalled with a new dryer.

Attachment 1937118

Attachment 1937119

Aus69c20 09-09-2019 04:49 PM

Re: jimbosprint 1972 C20 - the good, the bad, and the ugly
 
I would go the 700r4 transmission before the sniper.
My experience was that the sniper efi didn’t really change my mileage appreciably, even after tuning. If you’re happy with the carb on the truck I wouldn’t change it.

jimbosprint 09-23-2019 12:44 AM

Re: jimbosprint 1972 C20 - the good, the bad, and the ugly
 
4 Attachment(s)
Things just got serious around here. I bought three and a half trucks from a friend.

'71 GMC C2500 Longhorn
Attachment 1941762

'69 GMC K2500 Utility
Attachment 1941763

'72 Chevy K10 Cheyenne
Attachment 1941764

1/2 ton back half
Attachment 1941765

cornerstone 09-23-2019 10:31 AM

Re: jimbosprint 1972 C20 - the good, the bad, and the ugly
 
COOL!!!!!!! Do you have any plans set in your mind yet? Which one stays and gets attention first?

Aus69c20 09-23-2019 10:40 AM

Re: jimbosprint 1972 C20 - the good, the bad, and the ugly
 
Nice service truck

jimbosprint 09-23-2019 08:55 PM

Re: jimbosprint 1972 C20 - the good, the bad, and the ugly
 
Quote:

Originally Posted by cornerstone (Post 8597872)
COOL!!!!!!! Do you have any plans set in your mind yet? Which one stays and gets attention first?

No solid plans yet, except to sell the Longhorn. It has a new engine and a fairly nice interior. The white GMC service truck might get the bed from the half truck, or I might use the frame to turn my C20 into a 4x4, or I might just sell it. It needs engine and interior work. I got the ochre K10 to run the other day, but it's been sitting 10 years so it needs a lot of work to get it on the road.

jimbosprint 11-09-2019 03:30 PM

Re: jimbosprint 1972 C20 - the good, the bad, and the ugly
 
3 Attachment(s)
I've always meant to upgrade the wimpy factory two-row radiator in this truck so I just bought this Cold Case aluminum oversized two-row. It's as thick as any four row, and I'm hoping I never have overheating issues again. I also like the stock looking stamped tanks. Not as boxy as most aluminum radiators out there.

I created a separate thread just for this install and review: http://67-72chevytrucks.com/vboard/s...d.php?t=796321

Aus69c20 11-09-2019 04:04 PM

Re: jimbosprint 1972 C20 - the good, the bad, and the ugly
 
Looks as though it fits well.
My radiator is on its last legs and I have a similar criteria to you. Stock appearance with better performance.
I’ll keep an eye out for your update on the review.

jimbosprint 11-13-2019 10:28 PM

Re: jimbosprint 1972 C20 - the good, the bad, and the ugly
 
1 Attachment(s)
No temperature issues towing my other truck to the scales today. Stays well below the middle of the temp gauge. I'm pleased with this radiator so far.

jimbosprint 04-07-2020 04:10 PM

Re: jimbosprint 1972 C20 - the good, the bad, and the ugly
 
5 Attachment(s)
I took the carburetor off this truck to test on my K10 and decided it was a good time to fix a couple things that have bugged me - put silicone RTV on leaking intake bolts, replace the glass fuel filter, move the fuel pressure regulator mounting, install a banjo bolt on the carburetor fuel line, and replace the funky throttle bracket. I still need to bolt the regulator to the inner fender, but I am happy with where it is now. I am also pleased with the new throttle bracket. It needed bending to accommodate the 1/2" wood carb spacer and a couple extra holes drilled, but now the throttle and kickdown cables are in the right spot and solid.

Attachment 1999869

Attachment 1999870

Attachment 1999871

Attachment 1999872

Attachment 1999873

jimbosprint 04-09-2020 04:36 PM

Re: jimbosprint 1972 C20 - the good, the bad, and the ugly
 
2 Attachment(s)
Opened the hood to check on my work and noticed the heater valve was leaking. Replaced it this morning.

Attachment 2000701

Attachment 2000702

jimbosprint 04-19-2020 06:05 PM

Re: jimbosprint 1972 C20 - the good, the bad, and the ugly
 
4 Attachment(s)
Stuck at home for a month is not good for the old pickup (or me). Took it for a little drive out to some private property today for a round of disc golf.

Attachment 2004600

Attachment 2004601

Attachment 2004602

Attachment 2004603


All times are GMT -4. The time now is 09:04 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com