My Drive-way Build - '65 short pants
 

Figured I might as well start a build thread on here since I've been using this site for information and motivation for my truck. Well, it all started a couple of months ago when I was search the internet for a project truck. I was looking for an original patina'd short bed. That's when I came across this '65. Owner said there was only one small hole in the floor and the rest was solid. For the pics that I got, it did look a very decent truck. So, we struck a deal and I got the truck shipped from Mississippi to Pennsylvania. Here's one of the pics that I got from the seller.
http://i41.photobucket.com/albums/e2...0/IMG_0639.jpg

Looks nice right? Go through the brakes and suspension. Then get it running, fix the small hole in the floor and cruise it around town, right? Well once it was delivered, that plan went out of the window. The rotten panels include both floor pans, inner & outer rockers on both sides, outer A-pillars both sides, both inner kick panels, one cab corner, the panel above the windshield and the inner roof skin. Oh well, that's the risk you take when you buy something without being able to check it out in person. I'll post pics of the rot when the surgery begins. I ordered and have already received all the patch panels needed for the cab.

Wanting to convert to 5 lug and disks I pick this up on craigslist out of an '85 C10.
http://i41.photobucket.com/albums/e2...0/IMG_0715.jpg
I was supposed to get a whole set of wheels with it but the guy I got them off of didn't have one pulled off when I picked them up. I drove about an hour to pick everything up and couldn't stick around because of plans. Besides it was starting to rain pretty heavily. The guy told me that he was planning to coming down by neck of the woods the next weekend. I took him for his word that he would give he the wheel. Yup, you guessed it. He didn't my answer calls or texts and has disappeared. So I'm hunting for another wheel and it's proving to be more difficult than I anticipated. I've hit up three u-pull it yards and have came up empty. Does anybody have a lead on where I might be able to source a used one at. Here's what I'm looking for. Looks to be a 15"x7"
http://i41.photobucket.com/albums/e2...0/IMG_0716.jpg

Jumping ahead a bit, I ordered a couple other parts, pulled the front clip, yanked out the 283 (wound up being seized) & TOTT and pancaked the crossmember 2". I also remounted the crossmember 1" forward to center the wheel up in the fender.
http://i41.photobucket.com/albums/e2...0/IMG_0734.jpg
http://i41.photobucket.com/albums/e2...0/IMG_0744.jpg

That brings us up to this past weekend. Next post will bring everything up to where I'm at now.

Thanks for looking.

Re: My Drive-way Build - '65 short pants
 

Good luck with your new project '65. I am interested to see how much rust you ended up with once you got the truck in your possession. It looks like it will be an awesome truck though, so keep working towards getting it together.

Re: My Drive-way Build - '65 short pants
 

Welcome aboard! Sometimes beauty is only skin deep. :chevy:

Re: My Drive-way Build - '65 short pants
 

Welcome and congrats on the new project. Sorry the last couple of deals haven't gone as planned, but now that you have it home it looks like your off to a good start. Try craigslist on the rims....I see them pop up quite frequently. And check the forum classifieds too.

Re: My Drive-way Build - '65 short pants
 

Nice to see another one being saved from the crusher...:metal:

Gotta love PO's, Not!!!:lol:

I'm in and watching your progress...Have fun...:mm:

Re: My Drive-way Build - '65 short pants
 

Welcome to the forum :D

It really is unfortunate that some people are dishonest.

Re: My Drive-way Build - '65 short pants
 

I'll be watching

Re: My Drive-way Build - '65 short pants
 

Welcome from a former resident of Canonsburg.

Re: My Drive-way Build - '65 short pants
 

Welcome and I'm looking forward to your build.

Re: My Drive-way Build - '65 short pants
 

Thanks for all of the warm welcomes gentlemen. I really appreciate it. :metal:
I'm going to catch the thread up to where I'm at now. Nothing has happened with my truck but I did find this on craigslist last week and picked it up last weekend.
http://i41.photobucket.com/albums/e2...0/IMG_0749.jpg
Drove 4 hrs one way, but it has a lot of parts that I was looking for. Especially the BBW. I've been busy drilling spot welds for what seems like forever and the results are not what I was hoping for.
http://i41.photobucket.com/albums/e2...0/IMG_0753.jpg
Lots of rust was lurking inside. The two panels that I was really hoping to use ended up having heavy scale rust that when chipped away exposed holes. The inner roof panel I'm going to scrap and continue to look for another one. I'm hoping that I can patch up the rear panel. The rusty parts are right above the window.
http://i41.photobucket.com/albums/e2...0/IMG_0755.jpg
http://i41.photobucket.com/albums/e2...0/IMG_0754.jpg
If I can find a couple small window panels, I think I can cut some patch panels out of them to patch up the BBW panel. We'll see though.

I'm almost done stripping the parts cab of everything usable. Then it's off to the scrap yard and I can get a parking spot back. Even though the sheet metal is a bit rough, it was still a good buy. I got all of the custom cab trim pieces, auto column, auto pedals, bench seat, cluster with gauges, gas tank, dash, and all the glass.

I already replaced the cab mounts and hopefully I can get started on the sheet metal replacement soon. It's going to depend on the weather though. The forecast is for rain for the next week. I'll keep the thread updated as soon as there's some progress.

Thanks for checking in.

Re: My Drive-way Build - '65 short pants
 

PM sent......
http://i52.photobucket.com/albums/g3...619_212055.jpg

http://i52.photobucket.com/albums/g3...619_211606.jpg

Re: My Drive-way Build - '65 short pants
 

Thought I'd give a quick update on the slow goings on my truck. Not much progress but I'm slowly moving forward. I got all of the parts stripped off of the parts cab and scrapped the remainder. All of the ball joints and bushings are on order also. So once they come in I'll be able to get the front suspension back together. Can't wait to see it back down on it's wheels again.

Yesterday, I spent a little bit of time and started on the rust repair. Started on the worst side. All I got done was removing the rocker but at least now I can see what's going on. Here are a couple pics of what I'm working with.
http://i41.photobucket.com/albums/e2...0/IMG_0771.jpg
http://i41.photobucket.com/albums/e2...0/IMG_0773.jpg
http://i41.photobucket.com/albums/e2...0/IMG_0774.jpg
http://i41.photobucket.com/albums/e2...0/IMG_0776.jpg
http://i41.photobucket.com/albums/e2...0/IMG_0775.jpg

Re: My Drive-way Build - '65 short pants
 

Good news, they make all of the panels you need reproduction and you will be a better welder when this is over. Hang in there and keep posting pics!

Re: My Drive-way Build - '65 short pants
 

Spent some time working on the sheet metal replacement. I got to say I felt really overwhelmed and in over my head. This is the first time that I've ever attempted this much sheet metal replacement by far. But, after diving in it's not that bad at all. I think the best thing that you can do to prepare for something like this is to have a game plan. After that, let the body saws and grinders loose and let the sparks fly. Don't be afraid of messing up, IT'S ONLY METAL! At least that's what I tell myself. haha. I got all my patches from Top Banana and so far they fit... ok. Don't expect them to drop right in. You'll more than likely have to cut you panels into smaller ones and piece them back together. Anyways here's a few pics of the progress so far.

http://i41.photobucket.com/albums/e2...0/IMG_0790.jpg
http://i41.photobucket.com/albums/e2...0/IMG_0791.jpg

Well that's a giant hole now isn't it? Next are a few pics after I spent a bit on the replacement panel. I removed a strip by the tunnel as those lines didn't line up at all. The mount hole needed to be moved as well. It wasn't even close.
http://i41.photobucket.com/albums/e2...0/IMG_0785.jpg
The mount hole went from this:
http://i41.photobucket.com/albums/e2...0/IMG_0788.jpg
To this:
http://i41.photobucket.com/albums/e2...0/IMG_0789.jpg

Overall everything is fitting decently at this point. This is the biggest let down of the panel, but it's fixable.
http://i41.photobucket.com/albums/e2...0/IMG_0787.jpg
Wound up a bit short on material on that one. Wouldn't be a big issue if I had access to a brake but I don't. Would anybody close to Pittsburgh with one be willing to bend me up a few pieces? :lol: Hopefully I can make some progress today. Tomorrow starts a week of 12 hour work days, so there won't be any progress then.

Thanks for looking guys.

Re: My Drive-way Build - '65 short pants
 

Progress has been slow and steady with an emphasis on the slow part. But progress is progress none the less. Front suspension is back together. Had the lower arms blasted and I threw some por15 on them along with new bushings and ball joints. Also installed new upper arms and drop spindles.

Then there's the body work... It's taken me a really long time to get to the point that I'm at now, but I feel that I'm getting the hang of it. So hopefully the rest will go a bit quicker. Anyways here's the pics of where I'm at now.

I went from this...
http://i41.photobucket.com/albums/e2...0/IMG_0802.jpg
http://i41.photobucket.com/albums/e2...0/IMG_0804.jpg

to this...
http://i41.photobucket.com/albums/e2...0/IMG_0835.jpg

to where I'm at now...
http://i41.photobucket.com/albums/e2...0/IMG_0842.jpg

I'm hoping to get the rest of the inner rocker in this week so I can hang the door back on.

Thanks for looking.:bann:

Re: My Drive-way Build - '65 short pants
 

makes me want to fix my rust... looking good!

Re: My Drive-way Build - '65 short pants
 

You are making great progress. Keep it up.

Re: My Drive-way Build - '65 short pants
 

very nice work

Re: My Drive-way Build - '65 short pants
 

Great progress and hang in there...your almost done with it!!!

Re: My Drive-way Build - '65 short pants
 

Nice work I look forward to watching your progress.

Re: My Drive-way Build - '65 short pants
 

Sorry you had to deal with all the flaky people in the beginning. See it didn't stop you from taking on huge project and doing a great job at it.
All the patch panels I've dealt with all seem to need just that little bit of persuasion to fit properly.
Sub'd

Re: My Drive-way Build - '65 short pants
 

Nice work, keep it up.

Re: My Drive-way Build - '65 short pants
 

wouldn't feel bad about the rust heck even down here in texas most look like that. look at it this way you know what you have after all the cutting and welding, it will be like a new truck. just keep up your chin and the good work!
are you going to keep it a 283?

Re: My Drive-way Build - '65 short pants
 

Thanks. It's not a terribly bad job, but I can't wait until the metal work is done.

Thank you.

Thanks. I"m not doing as nice of a job as a lot of guys on here but It's my first time doing this sort of thing and I'm learning.

I'd say about 75% done.... with the first side. lol Some much left to do.

Thanks, brother.

Thanks. Well, I guess you win some and lose some. I'm just on a streak of bad luck, But it can't last forever.

Thanks.

Thanks. The floor rust I've come to accept, but the roof still irks me a bit. Since they're not offered in the aftermarket, I'm sure it's going to be tough and expensive sourcing the inner and outer roof panels that are in good shape. Hopefully, I can find another BBW inner panel for when the roof comes off too.
Nah, the 283 was locked up solid. I was toying with the idea of an Isuzu 4bd diesel, but I'm probably gonna throw some kind of lsx in her. Can't really beat them for price, reliability, mpg's, and performance.

Now onto today's accomplishments. Finished the rest of the inner rocker. Just have a little more welding and grinding left and the driver's side is done.

http://i41.photobucket.com/albums/e2...0/IMG_0843.jpg
http://i41.photobucket.com/albums/e2...0/IMG_0844.jpg

Then my buddy gave me a hand hanging the door back on. Feels good to actually be bolting parts back on even if it's just temporary. Hopefully the outer rocker will fit.

http://i41.photobucket.com/albums/e2...0/IMG_0845.jpg

slowly but surely.

Thanks for looking. :metal:

Re: My Drive-way Build - '65 short pants
 

Looking Good Dude!!