project: homegrown scrapper
3 Attachment(s)
this is my 70 c10 that was given to me this year
planes body drop 3 inch's air bags front and rear and the list goes on! |
Re: project: homegrown scrapper
looks like a good start, but why a 3in bodydrop you only need 1in to lay body or are you going to door it?
|
Re: project: homegrown scrapper
I think you might need an alignment... :D
Great looking build! |
Re: project: homegrown scrapper
lay body is what i wont
so i dont need to z it that much? 1 inch z is ok? |
Re: project: homegrown scrapper
A "Z" and a bodydrop are two seperate things. to lay body i would move the body mounts on the frame down 1", the "Z" depends on tire size.
what size tires do you plan on running? |
Re: project: homegrown scrapper
looks like a nice start... i agree on the body drop part, these trucks really dont need one, if all your looking to do is lay the rocker
|
Re: project: homegrown scrapper
i wish to run 20's
but im running 15's right now |
Re: project: homegrown scrapper
Cant wait to see the end result...good luck..
|
Re: project: homegrown scrapper
thanxs atx
|
Re: project: homegrown scrapper
For a 20 in rim the common tire size is about 27 in tall. i Z'ed my old frame 3" and could lay out on a 29 in tire with ART arms (upper and lower). I would think a 2 in "Z" would get you on the frame. but you might want to look into a crossmember section might work better for you....
|
Re: project: homegrown scrapper
what size wheel are u running fnlow69?
|
Re: project: homegrown scrapper
My new frame is set up to run a 28 in tire in front and if i could a 30 in back. the old frame that i Z'd was running a 27 in tire.
|
Re: project: homegrown scrapper
are u layin frame or body? fnlow
|
Re: project: homegrown scrapper
frame and body, well doors now.
|
Re: project: homegrown scrapper
sweet im getting there Lol
|
Re: project: homegrown scrapper
just orderd the air bags
i will post pics soon of my progress |
Re: project: homegrown scrapper
3 Attachment(s)
so heres my progress
i just got my air bags today got the back have almost done i z'd the front 3ichs the rear dosent set as low as the front so i have to put a little c notch to make up the front note: im buliting this on a highschoolers buget so cut me so slack lol |
Re: project: homegrown scrapper
Intresting. I dont think Ive ever seen a Z on the back.
|
Re: project: homegrown scrapper
1 Attachment(s)
this is how it sits with the bed on it
|
Re: project: homegrown scrapper
sweet
|
Re: project: homegrown scrapper
that brings me back to the days i worked on my truck on a high schoolers budget, keep up the good work.
|
Re: project: homegrown scrapper
i use to have the side mounted spare tire.. nice to see another stepside, you going to keep it a step side?.
truck is looking good! |
Re: project: homegrown scrapper
yes sir i like the stepsides better
besides every truck now days have fleat sides so i want to stand out! thanxs guys |
Re: project: homegrown scrapper
this looks like it will be a fun project to watch. keep up the good work man.
|
Re: project: homegrown scrapper
Quote:
looks like good progress |
All times are GMT -4. The time now is 03:44 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com