67 cab, 72 4x4 frame, motor, tranny, transfer, much more
 

Good Evening. I"m selling the following, this is being sold together, as i am not able to part it out.

1967 cab. New england condition. Someone has put in new rockers, and glassed a few spots, cab mounts are bad. Very workable cab. No doors, steering column, dash. No title.

1972 4X4 frame, its in pretty good shape, new springs were installed a couple years ago. PO told me it used go good, i can't verify that. Has plow push plates on it. And a cross piece was welded in, i'm guessing for strengh. has rally 6 lug rims. dual front shocks, steering stablizer

1972 v8 chevrolet. I was told its 350, could be 305, not sure. Is complete, center dump exhaust, 2 barrel carb. Doesn't run, hooked to a tranny, and a transfer case.

Stepside bed with spare cut out fenders. The bed itself is not that great, the fenders are in pretty good shape in my opinion.

1968 cab, parts only, no vin # no title.

Bring a trailer and a truck we will load it up.

Asking $1000 OR BEST OFFER

Pm with any quesitons. I have lots of pictures.

Thank you

Re: 67 cab, 72 4x4 frame, motor, tranny, transfer, much more
 

Also, has power steering set up.

Re: 67 cab, 72 4x4 frame, motor, tranny, transfer, much more
 

bump

Re: 67 cab, 72 4x4 frame, motor, tranny, transfer, much more
 

hello, i was wondering what part of Maine you are from and if i can get more pics of the frame and 68 cab please

Re: 67 cab, 72 4x4 frame, motor, tranny, transfer, much more
 

Bath Maine. The 68 cab is mostly scrap.
Posted via Mobile Device
Posted via Mobile Device

Re: 67 cab, 72 4x4 frame, motor, tranny, transfer, much more
 

BUMP
Posted via Mobile Device

Re: 67 cab, 72 4x4 frame, motor, tranny, transfer, much more
 

Bump, any offers?
Posted via Mobile Device

Re: 67 cab, 72 4x4 frame, motor, tranny, transfer, much more
 

Last bump
Posted via Mobile Device

Re: 67 cab, 72 4x4 frame, motor, tranny, transfer, much more
 

Ok, well no interest, i think the bed is sold, anyone want anything off this before i push it out into the field

Re: 67 cab, 72 4x4 frame, motor, tranny, transfer, much more
 

how much for the exhaust system tailpipes? what kind of mufflers are on it?
to 02645

Re: 67 cab, 72 4x4 frame, motor, tranny, transfer, much more
 

It just has some straight pipe out the back.
Posted via Mobile Device

Re: 67 cab, 72 4x4 frame, motor, tranny, transfer, much more
 

do you have any knobs for a cst or custom cab 67

Re: 67 cab, 72 4x4 frame, motor, tranny, transfer, much more
 

Both my cabs were base models. Just standard knobs. Sorry.

Re: 67 cab, 72 4x4 frame, motor, tranny, transfer, much more
 

Do you still have the 67 Cab

Re: 67 cab, 72 4x4 frame, motor, tranny, transfer, much more
 

Yes

Re: 67 cab, 72 4x4 frame, motor, tranny, transfer, much more
 

Interested in the 4x4 frame
p/m sent

Re: 67 cab, 72 4x4 frame, motor, tranny, transfer, much more
 

I'm really interested in the cab. I see someone is interested in the frame. Can you please send more pictures of the cab. All angles. Also any bad areas. Is the cab still attached to the frame.
Thanks
Nicholas
Posted via Mobile Device

Re: 67 cab, 72 4x4 frame, motor, tranny, transfer, much more
 

I am looking for an aluminum bellhousing if you have one. Shipped to 10952. Thanks.

Re: 67 cab, 72 4x4 frame, motor, tranny, transfer, much more
 

4spd or auto
Posted via Mobile Device

Re: 67 cab, 72 4x4 frame, motor, tranny, transfer, much more
 

4 speed.

Re: 67 cab, 72 4x4 frame, motor, tranny, transfer, much more
 

Cab needs work, its nothing i would tackle. The roof rails are bad, the mounts are bad. they fiberglassed the front firewall. I'm sure its repairable, someone added rockers already.

I was just selling it as part of the truck. If you want pictures i need an email address.

Re: 67 cab, 72 4x4 frame, motor, tranny, transfer, much more
 

Sorry, no 4 speeds.

Re: 67 cab, 72 4x4 frame, motor, tranny, transfer, much more
 

its an auto

Re: 67 cab, 72 4x4 frame, motor, tranny, transfer, much more
 

I would be interested in the transfer case if you could ship it? I know you said you wouldn't?

Re: 67 cab, 72 4x4 frame, motor, tranny, transfer, much more
 

I have someone interested In it, if not I'll figure out how I would ship it.
Posted via Mobile Device