any of you running chrome door visors ???
hey guys i got me some stainless door visors for my 65 c10 the kind that allow you to open your window a inch or 2 but deflect the rain anyway they came with no directions nada zip! can any of you that have them installed on your truck please explain to me how to put them on? and in some easy laymen terms please as im a bit slow on the uptake here. I would love your help thanks so much guys. P.S. they have 2 very small screws with them but i dont see where they would go on the door jam or window track im a bit lost here
|
Re: any of you running chrome door visors ???
Ok there is a left and a right visor. The slide up between the window seal and the door frame. When you slide them up and they seat in place you will see the screw holes end up right on the curve of the door frame. You will need to drill two holes on each of them for the little screws you have. I tape the visor in place and use a small center punch to mark the holes and a place for the drill bit to start and drill them right through the vent shade. I do them one at a time and put the screw in as I drill the hole them go to the next hole.
Jimmy |
Re: any of you running chrome door visors ???
The reason you should buy literature for your truck. 1965 Accessories Installation Reference Manual.
https://lh3.googleusercontent.com/65...w=w378-h672-no |
Re: any of you running chrome door visors ???
Quote:
|
Re: any of you running chrome door visors ???
Quote:
|
Re: any of you running chrome door visors ???
Quote:
|
Re: any of you running chrome door visors ???
Quote:
|
Re: any of you running chrome door visors ???
Post some pictures up when you get them on. I've had a set for years but haven't gotten around to installing them.
|
Re: any of you running chrome door visors ???
Quote:
|
Re: any of you running chrome door visors ???
4 Attachment(s)
Quote:
|
Re: any of you running chrome door visors ???
Those pics are to show it seated in place and the size bit I used. Next pics show it installed. I have a big feeling that all my difficulty with putting these in is probably due to the fact that they were cheap repops and not a factory part they were really not easy to fit or the drill for I have a feeling that the pre-drilled holes should have been in different places then they were and it would have made it much easier to drill and fit them in they were kind of bowed at the same time so the bends weren't proper so I had to massage it a little but they are in
|
Re: any of you running chrome door visors ???
3 Attachment(s)
Quote:
|
Re: any of you running chrome door visors ???
Quote:
|
Re: any of you running chrome door visors ???
Quote:
|
Re: any of you running chrome door visors ???
Were the visors offered on the 1960 models?
|
All times are GMT -4. The time now is 12:47 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com