The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Squarebody Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=139)
-   -   Engine trouble help (https://67-72chevytrucks.com/vboard/showthread.php?t=757514)

Dallen17 02-19-2018 10:28 PM

Engine trouble help
 
I have a 1983 Chevy k20 with a good wrench 350 crate motor. I have been having some problems with the truck mysterious losing oil. I've had to put about a quart of oil in the truck everyday for about a week. When I get up for school I find the truck with a few drops leaked out and go to check the oil and it's down to below the low mark on the dip stick. I wondered about the air filter too, so I took off the oil filter and found it had a lot of oil on the filter. I've put a lot of money in the truck and this scares me because I think the motor might be about to blow. If anyone can tell me a little more info and about what to do I'd much appreciated much. Please and thank you!:smoke:

Richard2112 02-19-2018 11:46 PM

Re: Engine trouble help
 
Sounds like a simple fix. How is your PCV valve set up? Does it tie in to the air cleaner? Is there a baffle in the valve covers to arrest oil flow through PCV?

Dallen17 02-20-2018 11:36 AM

Quote:

Originally Posted by Richard2112 (Post 8192612)
Sounds like a simple fix. How is your PCV valve set up? Does it tie in to the air cleaner? Is there a baffle in the valve covers to arrest oil flow through PCV?

It ties into the valve covers and then to the air filter. I might have to take off the valve covers to see if there is a baffle.
Posted via Mobile Device


All times are GMT -4. The time now is 10:35 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com