Serpentine belt conversions
 

This a used serpentine belt conversion is for small block chevys. The pics are my demo set up. The kit includes RH AC bracket, AC R-4 pump R134 or R12, LH Alt-power steering bracket, 100A Alt, power steering pump, belt tensioner, fan clutch, fan blade, clutch mounting studs & nuts, water pump pulley, crankshaft pulley w/bolts, braces and nuts & bolts. The RH bracket originally used 2 mounting bolts to the cylinder head. If your cylinder head only has the traditional one hole it will still work fine. I have sold many of these that only used one mounting hole with no problems. These will come cleaned and ready for detailing. I can detail a kit for 100.00 extra which will include media blasting and painting in satin black. I have four of these conversions for 225.00 plus shipping. Big block conversions also available.

Re: Serpentine belt conversions
 

would you consider selling this setup minus the power steering pump, pulley fan,clutch, and crank pulley?

Re: Serpentine belt conversions
 

Put me down for one.

How do you want to be paid?

Re: Serpentine belt conversions
 

Sure, 165.00 plus.

Re: Serpentine belt conversions
 

Will this fit 1970 4X4 radiator shroud, and the upper radiator hose. Do you have any with out A/C. What would shipping be to 30263. Any pics installed in trucks?

Re: Serpentine belt conversions
 

PM sent
No, it will not work with the deep 4X4 shroud. I'm thinking it would work with a 2WD shroud on a 4X4 truck. I have a local freind putting one in a 72 4X4 and he just got the 2WD shroud to see if it would work. Also won't with the factory upper metal tube. A non ac set up uses a dummy pulley in place of the ac pump therefor it uses the same belt. Sorry no pics of any installed. Shipping would be 67.66 Thanks, Tom

Re: Serpentine belt conversions
 

will this work with the regular water pump ordo i need a reverse flow?

Re: Serpentine belt conversions
 

It will require a reverse flow water pump. These pumps are available with or w/o the heater return port. I can supply it with a used pump but I would highly recommend a new one.

Re: Serpentine belt conversions
 

I am also interested. I have a 67/70 "327" I used different heads with holes for accessories. Looks like the alt bracket bolts on to a later model exhaust manifolds. mine are ram horn style, will this still work. Will there be any issue with crank pulley. What is shipping to 21863 Snow Hill,Md and is Paypal ok. Thanks Ed.

Re: Serpentine belt conversions
 

How much for a BB? Do you have any pics?

Re: Serpentine belt conversions
 

The bracket that goes to the exhaust manifold will not work with the ram horn manifolds with out mods. For those that have headers these conversions work fine. If still interested let me know, then I can get shipping cost.
Sorry, I sold the bbc kit local.

Thanks

Re: Serpentine belt conversions
 

Hey does manifold bracket hold the PS pump, or is it to stabilize the back of the ALT. I am trying to figure what Mods I will need to get this right. Thanks....Ed

Re: Serpentine belt conversions
 

so your selling basically jus the brackets and pullyes for 225 or does it come with the ac compressor, alternator, and power steering pump??

Re: Serpentine belt conversions
 

The bracket hits the manifold before it gets up to the head of the bolt. I can send a pic of the issue tomorrow night. It really helps support both. I have seen guys delete this bracket with no problems as far as I know.
The kit includes RH AC bracket, AC R-4 pump R134 or R12, LH Alt-power steering bracket, 100A Alt, power steering pump, belt tensioner, fan clutch, fan blade, clutch mounting studs & nuts, water pump pulley, crankshaft pulley w/bolts, braces and nuts & bolts.
You will need a new water pump, belt, and pig tail for alt.

Re: Serpentine belt conversions
 

I think I can make this work, cut the U shape off the tab and add a brace. Give me a shipping quote when you get a chance. .... Thanks Ed.

Re: Serpentine belt conversions
 

I am interested, but do not have the budget right now. Please let me know if you have more available in the future. Thanks!

Re: Serpentine belt conversions
 

Shipping via UPS is 68.00, Thanks

Re: Serpentine belt conversions
 

Hey Tom Let me know how to pay you or send me your paypal address.... Total was 293. is that correct......Thanks Ed

Re: Serpentine belt conversions
 

Do you still have some available? This would pretty much bolt up to a 70 gmc with a 350 right?

Re: Serpentine belt conversions
 

Subscribing to this in case you have more in the future

Re: Serpentine belt conversions
 

I would also be interested, Can you run the kit without the fan? Or does the fan hold the pulley on? I have electric fan so would not need fan and clutch if it will work like that. Oh and 134 would be my choice. Thanks Tim

Re: Serpentine belt conversions
 

Tim, it would work fine without the fan and clutch. Just use short bolts with HD flat washers to prevent the pulley from cracking over time. Thanks, Tom

Re: Serpentine belt conversions
 

Sold two still have two left. TTT

Re: Serpentine belt conversions
 

so how would I tell if this would fit on my 350?

Re: Serpentine belt conversions
 

Will this fit a 1976 SB 400 factory motor(no mods) with out A.C.?