The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (http://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (http://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   KS A very nice restored A/T Tilt Column. (http://67-72chevytrucks.com/vboard/showthread.php?t=672258)

RogerKoop 05-30-2015 09:36 AM

A very nice restored A/T Tilt Column.
 
5 Attachment(s)
I have for sale a very nice restored A/T Tilt Column.

The rebuild includes a complete disassembly and inspection for worn or broken parts. This is followed by cleaning and bead blasting most parts. The Hub and Housing are powder coated on most of the time but not always. The rest of the column is then painted and rebuilt to factory specs. This includes packing and set torque to factory specs on upper bearing assembly. The lower bearing is cleaned and packed. The dust or air seal is replaced with a new one. I have the lower bearing retainer and the screws that mount to neutral safety / backup light switch re-cadmium plated. The original turn signal harness is checked using one of my trucks. It will be reused if it passes the use test. It is then cleaned and re-greased. A new turn signal harness is available on request. The column is rebuilt using new, NOS and quality used parts. Column is ready to bolt in.

On automatic columns the neutral safety/backup light switch is installed and has been adjusted to match the shift indicator. No additional adjustment should be needed, just plug and play.

If you want to replace the reproduction shifter arm I have a number of GM original shifter arms that have been re-chromed. All of them are high quality show chrome. I have both the standard pickup shifter as well as some out of vans which are about 4” shorter. Some owners opt for the shorter shifter based on a smaller steering wheel size. The price is an additional $50.00.

The following New or NOS parts were installed:

- Flasher Knob
- Lower Inner Dust Seal
- Upper Rubber Gasket to Dash Bezel
- Lower Rubber Gasket to Firewall
- Standard Shifter Arm or Short Van Shifter. Your choice.
- Shifter Arm Knob
- Tilt Release Arm
- Turn Signal Arm
- Tilt Pointer
- Transmission Indicator Lens

Price is $500.00 and up plus shipping to CONUS. I accept Checks, MO's and PayPal. Please include your shipping address. I will ship this via UPS or FedEx.

I have several more columns to complete, so if you would like one let me know.

RogerKoop 05-30-2015 09:37 AM

Re: A very nice restored A/T Tilt Column.
 
2 Attachment(s)
More pics

rkintn_68 05-30-2015 04:14 PM

Re: A very nice restored A/T Tilt Column.
 
They look good , great deal !!! Is the one posted 500.00 with either shifter
or are they all 500 + 50 for shifter ? How will you ship them in cardboard or
wood ? Can I get a quote to 37043 ? Thanks

RogerKoop 05-30-2015 06:39 PM

Re: A very nice restored A/T Tilt Column.
 
Quote:

Originally Posted by rkintn_68 (Post 7191715)
They look good , great deal !!! Is the one posted 500.00 with either shifter
or are they all 500 + 50 for shifter ? How will you ship them in cardboard or
wood ? Can I get a quote to 37043 ? Thanks

PM sent

RogerKoop 07-07-2015 03:15 PM

Re: A very nice restored A/T Tilt Column.
 
ttt

Woodnears 07-10-2015 12:35 AM

Re: A very nice restored A/T Tilt Column.
 
Quote to 67801 please

RogerKoop 07-10-2015 01:53 PM

Re: A very nice restored A/T Tilt Column.
 
Quote:

Originally Posted by Woodnears (Post 7236409)
Quote to 67801 please

PM sent

rharp 07-10-2015 05:16 PM

Re: A very nice restored A/T Tilt Column.
 
If someone brought you a column, how much would you charge to rebuild it for them?

Woodnears 07-10-2015 08:04 PM

Re: A very nice restored A/T Tilt Column.
 
Do you have any gear selectors that would work with my 4l60e? Beautiful column that's my only holdback. I would even take a tilt floor shift column if you had one restored.

RogerKoop 07-10-2015 09:51 PM

Re: A very nice restored A/T Tilt Column.
 
Quote:

Originally Posted by rharp (Post 7237045)
If someone brought you a column, how much would you charge to rebuild it for them?

Price runs around $250.00 to $300.00 plus what ever parts are needed.

RogerKoop 07-10-2015 09:55 PM

Re: A very nice restored A/T Tilt Column.
 
Quote:

Originally Posted by Woodnears (Post 7237184)
Do you have any gear selectors that would work with my 4l60e? Beautiful column that's my only holdback. I would even take a tilt floor shift column if you had one restored.

I should have gear selectors for a 5l60e, let me check.

I will have a 4-speed later next month. Still need some parts for it.

RogerKoop 12-05-2015 11:50 PM

Re: A very nice restored A/T Tilt Column.
 
ttt

Ugly 61 12-06-2015 09:13 AM

Re: A very nice restored A/T Tilt Column.
 
Would you rebuild the tilt that I have in my truck or exchange it for one you have already rebuilt? If you would exchange is there any value in the one I have as a core?
Ugly 61

Already Gone 12-06-2015 05:33 PM

Re: A very nice restored A/T Tilt Column.
 
subscribed

RogerKoop 12-06-2015 06:04 PM

Re: A very nice restored A/T Tilt Column.
 
Quote:

Originally Posted by Ugly 61 (Post 7400232)
Would you rebuild the tilt that I have in my truck or exchange it for one you have already rebuilt? If you would exchange is there any value in the one I have as a core?
Ugly 61

I can do either. The price either way is based on what parts were used to rebuild yours and mine. What condition is yours and what parts will need to be replaced?

Ugly 61 12-06-2015 10:33 PM

Re: A very nice restored A/T Tilt Column.
 
Shift bowl is worn out where the gearshift pin goes through and the bottom 2 or 3 notches won't stay latched. Also need a new turn signal unit.
Gary

RogerKoop 12-13-2015 01:25 PM

Re: A very nice restored A/T Tilt Column.
 
Quote:

Originally Posted by Ugly 61 (Post 7401035)
Shift bowl is worn out where the gearshift pin goes through and the bottom 2 or 3 notches won't stay latched. Also need a new turn signal unit.
Gary

I've got the parts to repair yours. Its possible I may be able to repair your hub or replace it with a nice used one or NOS. As for it not staying latched I will need to get it apart to see whats happening. Let me know.

Ugly 61 12-20-2015 11:36 PM

Re: A very nice restored A/T Tilt Column.
 
I'll be starting on a complete rebuild on my truck after the 1st I'll contact you when I get the column out.

Gary

RogerKoop 12-21-2015 10:13 AM

Re: A very nice restored A/T Tilt Column.
 
I have another tilt column ready for shipping.

RogerKoop 01-31-2016 01:17 PM

Re: A very nice restored A/T Tilt Column.
 
ttt

RogerKoop 02-02-2016 09:38 AM

Re: A very nice restored A/T Tilt Column.
 
ttt

dfosh 02-02-2016 11:12 AM

Re: A very nice restored A/T Tilt Column.
 
I have a 68 gmc with a 700r4 zip 37745 short shifter price quote please .

Cash3481 02-02-2016 11:39 PM

Re: A very nice restored A/T Tilt Column.
 
Roger,
I have 2 people asking for tilt columns...
Are you bringing any to the swap meet this weekend?

RogerKoop 02-03-2016 09:33 AM

Re: A very nice restored A/T Tilt Column.
 
Quote:

Originally Posted by Cash3481 (Post 7471775)
Roger,
I have 2 people asking for tilt columns...
Are you bringing any to the swap meet this weekend?

I can bring 2, one is $500.00 and the other is $540.00. Cash if you want to bypass the kansas sales tax.

Need any vent windows. I have 2 sets ready to go.

craneboy72 02-03-2016 09:38 AM

Re: A very nice restored A/T Tilt Column.
 
what would a 4 speed tilt for a 71 blazer shipped to 01720?


All times are GMT -4. The time now is 07:52 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Copyright 1997-2020 67-72chevytrucks.com