Re: Project Patina Burb
 

My floor has 4 holes. I'm probably going to put a 3 point harness on one side, like the one I had on my blazer, for my youngest little girl. I'll put a normal 3 point shoulder belt on the other side for my 7 year old.

The third row will be factory.

Re: Project Patina Burb
 

Here's the type of harness I plan on using for my little girl. I figured it would be better then having the shoulder harness stretched across that far over to buckle her in.

http://i299.photobucket.com/albums/m...e/DSCF7949.jpg

http://i299.photobucket.com/albums/m...e/DSCF7948.jpg

Re: Project Patina Burb
 

nice..i like the idea

whos truck is that in the pic?

Re: Project Patina Burb
 

That's my old blazer

http://i299.photobucket.com/albums/m...e/DSCF7981.jpg

Re: Project Patina Burb
 

Bryan,... did you sell the blazer, or do you still have it?

Re: Project Patina Burb
 

Sounds like I have your seat and you have mine. Wanna trade seat bottoms? :lol:. There should be places to bolt the seatbelts to on those rear brackets.
Posted via Mobile Device

Re: Project Patina Burb
 

No, I sold it last October. We had another little girl, Lizzy, last August. Between my small business doing really bad and hospital bills started coming in, I sold it. I didn't miss it until April :lol:

Re: Project Patina Burb
 

Looking back at the original post in this thread, you can see the original second row seat that I gave away had the four brackets on the rear. I'll probably use one of them to bolt the 3 point harness to.

Re: Project Patina Burb
 

Here's my hatch that I picked up from the owner of SOKY Classics

http://i299.photobucket.com/albums/m...b/d20453ec.jpg

http://i299.photobucket.com/albums/m...b/7c77394d.jpg

Re: Project Patina Burb
 

Got alot of the wiring done on the air ride today. I'm running Slams in the front and the PO gave me these HUGE Goodyear bags that I'm using on the rear. I believe they came from a bus. I also am using the older style Ride Tech Digital Pressure sensor and 4 sensors that I got from smbrouss70.

I mounted the tank and the compressor. Also put the valves together with pressure sensors and mounted them in the best locations. Wired everything up, but I don't have a battery in it. I've had it on schrader valves for awhile now.

I still have to wire up the switch box and put some 90 degree fittings on the rear, wire up the compressor with relay, and mount the water trap(I just ordered it).

Re: Project Patina Burb
 

okay, finished up the wiring today on the air bags except for wiring up the switch box. I needed a few more connectors.

I had some help from my daughter, Halen, who loves to work on it with me.

http://i299.photobucket.com/albums/m...b/25ef2ef5.jpg

Dropped the drive shaft and got a measurement on how much to shorten it for it to fit the 4L60E.

Re: Project Patina Burb
 

Very nice!
Posted via Mobile Device

Re: Project Patina Burb
 

I think I have you on FB :lol: Are you bryan?

Anyways, cool build Im following along.

Re: Project Patina Burb
 

Got most of the fuel line ran today. Still have to install the tank, but all the line has been ran to the rear of the burb.

Re: Project Patina Burb
 

Got the tank in and wired up. Got it off jack stands for the first time in a couple of months.

Still messing with the new wiring harness. It's an 21 circuit EZ Wiring harness and it's a bit overwhelming to say the least.
Posted via Mobile Device

Re: Project Patina Burb
 

Subscribed. Cant wait to see it on the Power Tour :metal:
Posted via Mobile Device

Re: Project Patina Burb
 

Got a few things done today. I got my carpet kit in from Brother's this week also. I'm kind of collecting parts as of late.

Cleaned up some of the metal interior trip today with the bench grinder. I slapped the wire wheel attachment on it and cleaned most of the surface rust that was on them.

Re: Project Patina Burb
 

I also saw another problem I'm going to have to deal with due to the PO shaving certain things.

I have a good hatch, but the push button has been shaved so I'm not sure how I'm going to get it open from the outside.

Re: Project Patina Burb
 

Got any progress pics Bryan?

Re: Project Patina Burb
 

Here are a few Rus, still fighting with the wiring harness and need someone with a few welding skills. Here's a few shots I just took. You can see the button is shaved on the rear and what it looks like inside.


http://i299.photobucket.com/albums/m...ps9918ebe7.jpg
http://i299.photobucket.com/albums/m...pscc17cbd0.jpg


http://i299.photobucket.com/albums/m...ps3447f5b4.jpg

http://i299.photobucket.com/albums/m...ps177925a9.jpg
Posted via Mobile Device

Re: Project Patina Burb
 

Looking good! What are you needing welded?

Re: Project Patina Burb
 

Oh, I need to make a gas door and make two tail lights.
Posted via Mobile Device

Re: Project Patina Burb
 

Ah ok. I can help with some welding!

Re: Project Patina Burb
 

Well, maybe we can hook up some time soon.
Posted via Mobile Device

Re: Project Patina Burb
 

Sounds good to me. I need to get up that way to show you that cab I have in Cross Plains anyways.
Posted via Mobile Device