The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973-1987 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=5)
-   -   WV Looking for 2wd 3:42/3:73 complete rear end (https://67-72chevytrucks.com/vboard/showthread.php?t=746072)

bigarmzz 09-05-2017 09:53 PM

Looking for 2wd 3:42/3:73 complete rear end
 
My 2wd 86 C10 has 2:73 10 bolt open rear and it's driving me nuts :waah:
I know there are suburbans getting parted out with better geared rear ends in them somewhere. New posi and gears plus labor isn't in the budget, lmk if anyone can help me out. Thanks:metal:
Parts for these trucks aren't plentiful in this area anymore unfortunately rust has taken about everything around here

Warrens69GMC 09-10-2017 05:21 PM

Re: Looking for 2wd 3:42/3:73 complete rear end
 
www.car-part.com

looking up your zip, 26241 list quite a few in the 100-250 dollar range. Looks like your in a smaller town as the are `100 miles away.

bigarmzz 09-27-2017 04:09 PM

Re: Looking for 2wd 3:42/3:73 complete rear end
 
bump, still looking, id be happy with a 3:42 or 3:73 out of a 4wd, ring gear, guts and all, I could have that put in my current 10 bolt, thanks

1rippen6 09-29-2017 02:20 PM

Re: Looking for 2wd 3:42/3:73 complete rear end
 
I have a 4x4 rear out of a 84 blazer with 3:42s I'm in Greencastle PA

bigarmzz 10-15-2017 09:19 PM

Re: Looking for 2wd 3:42/3:73 complete rear end
 
bump, still looking

1rippen6 10-16-2017 08:41 PM

Re: Looking for 2wd 3:42/3:73 complete rear end
 
Sorry, I didn't forget about you just been busy putting a yard in took a lot longer then I expected. I looked today and it actually has 3:08s sorry I couldn't help.

bigarmzz 10-16-2017 09:08 PM

Re: Looking for 2wd 3:42/3:73 complete rear end
 
Quote:

Originally Posted by 1rippen6 (Post 8062211)
Sorry, I didn't forget about you just been busy putting a yard in took a lot longer then I expected. I looked today and it actually has 3:08s sorry I couldn't help.

I had a feeling it ended up bein a different gear ratio than I needed. Just my luck :rolleyes::rolleyes:

halfgassed 10-28-2017 01:17 PM

Re: Looking for 2wd 3:42/3:73 complete rear end
 
How soon do ya want it? Its the wrong time of year for me to be messing with parting vehicles, but in another month or so I should be caught up were I can cut one out. I dont mind shipping if you arrange and pay for it.
I have a 5 lug 342 12bolt that came out of my 73. Its out of the truck but I had to raid the spider gears out of it for an daily driver emergency. I do have another 12bolt I can steal the spiders from and replace. I do have the brakes for it but count on replacing.

I'm 90% sure I have 342 10 bolt sitting under a 2wd. I had the cover off it a few years ago and recall it having 342s. Complete axle, brakes are prolly shot. Iirc it came out of a 85ish 2wd long bed with a 305/700r4.
$150 ea plus shipping

bigarmzz 03-08-2018 04:26 PM

Re: Looking for 2wd 3:42/3:73 complete rear end
 
still kinda keeping an eye out


All times are GMT -4. The time now is 02:23 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Copyright 1997-2020 67-72chevytrucks.com