The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   12-bolt Question (https://67-72chevytrucks.com/vboard/showthread.php?t=110872)

PTS Kustoms 07-07-2004 12:54 AM

12-bolt Question
 
Does Anyone Know Of A C-clip Eliminator Kit For A Factory 67-72 12-bolt Rearend That Will Survive Street Use? I Have Spoke To Strange, Mark Williams, And Many Others And They State That Their Kit Is For Drag Use Only. I Definitely Do Not Want Install Ford Housing Ends To Get Around This Problem. Please Help...

Primed67 07-07-2004 11:04 AM

Just about all companies that make racing parts like that will tell you that they are for racing only. It basically is for liability reasons.

Burnsman 07-07-2004 12:02 PM

c-clip eliminators
 
I run mine on my street cars all the time. Never had them on a truck though. Most of my street cars are set-up for straight line though and don't see much high speed cornering (they handle like a can of beans).

71Dragtruck 07-08-2004 02:36 AM

The guy from Moser told me the same thing? I'd also like to know how they would hold up on the street, he said they would leak?

Burnsman 07-08-2004 07:31 AM

c-clip eliminators
 
They are more prone to leakage, but I've never had any problems.

BobbyK 07-08-2004 07:45 AM

I've got a 12 bolt with a Gov-Loc and "C" clips and have not had any problems.
99% steet,1% offroad,...no problems at all..

You don't need "C: clip eliminators for street use.


All times are GMT -4. The time now is 02:03 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com