The 1947 - Present Chevrolet & GMC Truck Message Board Network - Pertronix in an L6 250 fuel line clearance

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Pertronix in an L6 250 fuel line clearance (https://67-72chevytrucks.com/vboard/showthread.php?t=709193)

quick60

06-06-2016 08:55 PM

Pertronix in an L6 250 fuel line clearance

I installed a Pertronix distributor today 67GMC 250 L6 but the fuel line is interfering with the distributor cap fitting the distributor. The fuel line is not original. Does anyone know if an aftermarket original fuel line will clear the cap or not?

Rich69shortfleet

06-07-2016 10:41 AM

Re: Pertronix in an L6 250 fuel line clearance

Why not just bend the fuel line a bit?

quick60

06-07-2016 11:55 PM

Re: Pertronix in an L6 250 fuel line clearance

I have bent it and got the cap to fit. However the line clamp will not line up with the hole for the bolt. I prefer to not have the line unsecured between the pump and carb. I can custom bend a new one just would like the factory look. I suck at bending lines.

All times are GMT -4. The time now is 11:56 AM.