Radiator Core Support Bushings?
 

I'm looking for core support bushings for 63 C10.
I think they just leather pads in there when I pulled it apart years ago. What are you guys using?
Also is there a place to get them where I dont have to pay more for shipping than what the parts cost?
Thanks

Re: Radiator Core Support Bushings?
 

Best off make a list of parts you need and buy them all at one time Then the shipping it more better

Re: Radiator Core Support Bushings?
 

Assuming that the 63 uses the same ones as 64,5,6 which is what I'm familiar with, Be aware that the top and bottom ones are slightly different. Factory bottoms have a divot to clear the rivet, while tops do not. Some aftermarket ones do not have this feature, so is worth paying attention to. A correct bottom will work fine on top, but a top will not fit well on the bottom.
Hope this all makes sense,
Tom

Re: Radiator Core Support Bushings?
 

The radiator support bushings are the same '60-'68.

https://www.classicparts.com/1960-68...info/78%2D625/

Re: Radiator Core Support Bushings?
 

Where the heck do those go? I thought he was talking about those U shaped rubber thingys.

Re: Radiator Core Support Bushings?
 

They go between the core support and the frame rails.
Jimmy

Re: Radiator Core Support Bushings?
 

Oops, I was thinking of wrong part,
Never mind.

Re: Radiator Core Support Bushings?
 

I built these out of aluminum, did not see the need for isolation.


Attachment 1802294

Attachment 1802295

Attachment 1802296

Re: Radiator Core Support Bushings?
 

And you could sell those "if" they were the correct height for every truck. I dont know the answer to that myself.