'62 longbed going under the knife
 

This is my '62 longbed, I've been working on this project for about a very slow year. But now that I have gotten back in gear to get it done I decided to finally start a thread. I actually bought this truck as a parts truck, but it ended up being the main project. (funny how that works out) But these pics are from the day I brought it home. Never really started this build with much of a plan except to drop it and make it fast, so we will see what happens!

Re: '62 longed going under the knife
 

My brother Calvin did a full tubular chassis on his '70 a few years ago and the original frame he had (already dropped 5" in the front and 7" in the back) was up for grabs to get used. So one of the first things I wanted to do was swap the body off the original '62 frame onto the '70 to see where about the stance was going to set.

Re: '62 longed going under the knife
 

That stance looks great. What wheels and tire size are you running?

Re: '62 longed going under the knife
 

thanks man! but the wheels are just 15" steelies with 275-60r15, Might upgrade eventually when I get a little more cash in my pocket.

Re: '62 longed going under the knife
 

Here is some of the door repairs I did, just lower door skins and inner door on both

Re: '62 longed going under the knife
 

Another pic of the door almost buttoned up and another progress shot

Re: '62 longed going under the knife
 

Here is digging into the rust repair on the drivers side floor.

Re: '62 longed going under the knife
 

few more shots of the floor repair.

Re: '62 longed going under the knife
 

Couple more shots of the floor.

Re: '62 longed going under the knife
 

Wow! Impressive!
That is how you tackle it right there!!!!
You have simply decide to go for it, and get things done!
The rust does not simply go-away if you look at it more!
Forge ahead! Great job!!!

Re: '62 longed going under the knife
 

Looks good.
Sub'd

Re: '62 longed going under the knife
 

Thanks man! your exactly right with the rust I was tired of even looking at it.

Re: '62 longed going under the knife
 

thanks man

Re: '62 longed going under the knife
 

Thanks. I thought the rims looked a little deeper dished than just stock rims. I'm considering a build and have spent a lot of hours on this forum admiring the work you guys do. I have a line on a fairly clean '66 C20 that I would like to make look like your truck. I recently finished a '65 Cobra replica build and miss the wrenching!!!

Re: '62 longed going under the knife
 

Nice!! Those are good shots of the rust repair!

Re: '62 longed going under the knife
 

I see you found it! lol

Re: '62 longed going under the knife
 

Yes sir I did!

Re: '62 longed going under the knife
 

Here are a few shots getting into the cab corner replacement

Re: '62 longed going under the knife
 

I do have more pictures of the finished cab corner somewhere I am gonna have to find, But for now I got some shots of the firewall clean up

Re: '62 longed going under the knife
 

few more shots of the firewall progress

Re: '62 longed going under the knife
 

Pretty cool pic of the cab sitting back on the frame (for now)

Re: '62 longed going under the knife
 

What's your thinking with rain water run off here? :
http://67-72chevytrucks.com/vboard/a...1&d=1455852595

Re: '62 longed going under the knife
 

well for the most part avoid the rain while if I can, I know its pretty impractical but its a look I really enjoy

Re: '62 longed going under the knife
 

Here are a few shots of some of the rust repair I did on the inside of the cab

Re: '62 longed going under the knife
 

A few more pics from the outside