Lime Wife's 67
1 Attachment(s)
So i decided to start a build thread on the 67, that will be my wife's truck to drive. We bought it and decided to let her build it the way she wanted but i am doing most of the work:lol:
|
Re: Lime Wife's 67
3 Attachment(s)
I took the interior out and started cleaning the floorboards and painted them they were in good shape notice the rockers and bottom of pass. door where replace by the po
|
Re: Lime Wife's 67
4 Attachment(s)
i put the carpet and the seat in and she said i don't like the red interior so i that will be changed lol
|
Re: Lime Wife's 67
4 Attachment(s)
I got the motor to run for about 30 second poorly though and the wireing was a mess. Then i found out that the oil was getting water in it so i decided just to pull the motor, hauled it to my dads and got it out
|
Re: Lime Wife's 67
2 Attachment(s)
so i had a long winter with no real progress
|
Re: Lime Wife's 67
nice man is she keeping that floor shifter?..
what're the plans? |
Re: Lime Wife's 67
2 Attachment(s)
got some small parts painted, and built a small harness to move the wiper switch over like in later models
|
Re: Lime Wife's 67
Quote:
|
Re: Lime Wife's 67
3 Attachment(s)
started on the gauges getting them placed and wired up
|
Re: Lime Wife's 67
4 Attachment(s)
got a drivers side window regulator and installed it
|
Re: Lime Wife's 67
4 Attachment(s)
the wife scraped all the purple tint off the back window and i installed new locks and ing. cylinder, painted the vent window
|
Re: Lime Wife's 67
4 Attachment(s)
took apart the heater controls to rebuid them, and started taking off the front sheet medal and installed a door latch control
|
Re: Lime Wife's 67
3 Attachment(s)
got the dog house off the truck started cleaning the frame and firewall, got the firewall primed and installed turn siginal and bright indicators in the gauges
|
Re: Lime Wife's 67
3 Attachment(s)
painted the inner side of the fenders
|
Re: Lime Wife's 67
3 Attachment(s)
got firewall painted and enough of the frame painted to put the motor in, i'll take the suspension off when i have all the weight back on the front end. and got the heater controls back in
|
Re: Lime Wife's 67
1 Attachment(s)
one of the heads was cracked so thats where the water was coming from, so i got another one and got them redone
|
Re: Lime Wife's 67
hope fully i can start hanging sheet metal soon. Have to paint the rad. support etc. and need to finish the engine:chevy:
|
Re: Lime Wife's 67
Lookin good bro!! Keep it up
|
Re: Lime Wife's 67
Looking good keep pluggin away at her..
|
Re: Lime Wife's 67
so its an automatic truck? Your lucky to have it converted to disc already..
I wish it would quit raining so I can do some welding! |
Re: Lime Wife's 67
Quote:
|
Re: Lime Wife's 67
I have a garage, and my truck is sitting outside a garage
but the garage is so full of crap i cant get my truck in it to work LOL and I dont have a gas tank in it to drive it to my house to work |
Re: Lime Wife's 67
yea i here ya i go out to my dads where 90% of my stuff is and i have to move something out to get mine in the garage to do something i do all my major work there
|
Re: Lime Wife's 67
haha if it rains i will probably be cleaning out the garage so my truck will fit i mean there is junk EVERYWHERE over there!
|
Re: Lime Wife's 67
:haha::haha:
Quote:
|
All times are GMT -4. The time now is 10:22 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com