Decals for 8000 RPM Tach and Vacuum
5 Attachment(s)
I designed these decals because I don't like how the text looks on the reproduction lenses for the 8k tachometer conversion kits. The font is wrong, and the numbers aren't aligned well with the tach. Also, they apply the text and green paint both on the back of the lens, but the green paint was applied to the front of the lens on the originals. This makes the reproduction lenses not light up as well at night.
To design these stickers, I scanned an OE 5k tach and vac lens and used CAD software to trace the characters and set the spacing to align with the 8k tach. I borrowed the missing 6, 7 and 8 numbers from a scan of the speedometer. These decals are cut out of adhesive-backed vinyl. Clear transfer tape is applied to the front of the decal to allow the decal to be removed from the white backing and then applied to the lens. Sometimes portions of the decal don't want to stay attached to the transfer tape, which requires firm rubbing of the transfer tape against the decal followed by peeling it off slowly while checking that each character lifts off the backing. The original dummy gauge graphics on the lens must first be removed with a small polishing wheel. I used a cheap one from Harbor Freight on my cordless drill. A quick wipe-down with isopropyl alcohol cleans off the residue. Just don't leave the alcohol on there too long, as it can cloud the surface of the lens. By the way, minor waviness in the surface of the lens is left behind from where the graphics were removed. It is possible to see it a little bit if you get light reflecting at just the right angle. There is a border around each decal that aligns with the circle on the lens. A flat side is provided for setting the orientation. I like to apply a long piece of masking tape to use as a horizontal guide. Don't apply the tape over original text or paint as it may lift off when removing the tape. You've got to be careful not to let the decal touch the lens prematurely as you're aligning it. Hold the lens up to a light so you can see through the decal backing to align it. You can tape down one edge of the sticker while the backing is still on and use the tape as a hinge to set the sticker in place on the back of the lens after removing the backing. https://youtube.com/shorts/QPzylsrfP-w?feature=shared If you have a 5k tachometer already and you want to convert to an 8k, then all you need is one of these 8k decals and the 8k tach. You can buy just the tach from npdlink.com. if you need tach/vac tins, member 70shortfleet can modify your originals. He does amazing work. ***EDIT*** I also have KPH decals available. 8k Tach Decal $15 mailed 5k Tach Decal $10 mailed 0-160 KPH Decal $20 mailed VACUUM Decal $10 mailed TRANS TEMP Decal $10 mailed BOOST Decal $10 mailed Money order or personal check preferred. PayPal accepted, you pay fees https://67-72chevytrucks.com/vboard/...1&d=1701498958 https://67-72chevytrucks.com/vboard/...1&d=1701211418 https://67-72chevytrucks.com/vboard/...1&d=1701142874 https://67-72chevytrucks.com/vboard/...1&d=1702015973 |
Re: Decals for 8000 RPM Tach and Vacuum
2 Attachment(s)
A couple more photos.
|
Re: Decals for 8000 RPM Tach and Vacuum
Will take one of the 8K tach decals to use with my air pressure lense.
|
Re: Decals for 8000 RPM Tach and Vacuum
I will take a tach and a vacuum. Send me a PM and I will get you paid.
|
Re: Decals for 8000 RPM Tach and Vacuum
Nice work. Great contribution.
|
Re: Decals for 8000 RPM Tach and Vacuum
I'll take 1 tach and 1 vac.
Thanks, David |
Re: Decals for 8000 RPM Tach and Vacuum
PMs sent
|
Re: Decals for 8000 RPM Tach and Vacuum
I’ll take one of each
|
Re: Decals for 8000 RPM Tach and Vacuum
Quote:
|
Re: Decals for 8000 RPM Tach and Vacuum
Received the tach decal today. Thank you. Try to dig out the cluster that has the lens I am using soon. FWIU I am scheduled to hang Christmas lights this coming weekend.
Richard |
Re: Decals for 8000 RPM Tach and Vacuum
I'm glad it made it to you quickly. Other letters I've sent recently have been taking more than a week to arrive.
|
Re: Decals for 8000 RPM Tach and Vacuum
1 Attachment(s)
I also have km/h decals available.
|
Re: Decals for 8000 RPM Tach and Vacuum
Interested in one of those! PM sent
|
Re: Decals for 8000 RPM Tach and Vacuum
1 Attachment(s)
Here's a TRANS TEMP decal for Sixty7k10
|
Re: Decals for 8000 RPM Tach and Vacuum
Do you have anymore trans temp decals?
|
Re: Decals for 8000 RPM Tach and Vacuum
Quote:
|
Re: Decals for 8000 RPM Tach and Vacuum
Can you do a boost decal?
|
Re: Decals for 8000 RPM Tach and Vacuum
Quote:
|
Re: Decals for 8000 RPM Tach and Vacuum
Quote:
|
Re: Decals for 8000 RPM Tach and Vacuum
Boost just like trans temp to be used in the same place on a different set of gauges
|
Re: Decals for 8000 RPM Tach and Vacuum
Quote:
|
Re: Decals for 8000 RPM Tach and Vacuum
1 Attachment(s)
Quote:
|
Re: Decals for 8000 RPM Tach and Vacuum
Yes, that looks good. How much do I need to send?
|
Re: Decals for 8000 RPM Tach and Vacuum
All purchased decals have been mailed out. I can make more for anyone who is interested. If you want something different, let me know.
|
Re: Decals for 8000 RPM Tach and Vacuum
First shipment received, they look really good!
Thanks |
All times are GMT -4. The time now is 02:36 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com