cutting up a 72 k5
 

spare tire carrier and cover $100+ride obo, filler neck $50+ shipping, cutting up any and all. ask and i will try to answer. have frame rails too. all brackets still there. thanks, glen

Re: cutting up a 72 k5
 

Ill take the carrier and cover

Re: cutting up a 72 k5
 

I might be interested in the whole tub! Any more pics of the rear bed area? Also condition of the frame with pics.
Posted via Mobile Device

Re: cutting up a 72 k5
 

pm paypal info on tire carrier and neck.

Re: cutting up a 72 k5
 

Do you have the rear seat seatbelt brackets and the underside renforcing bracket? Thanks Carey

Re: cutting up a 72 k5
 

Hows the quarters

Re: cutting up a 72 k5
 

frame was cut up but all the brackets are good. also have factory skid plate. tub got cut earler today, markers back are getting hung on the wall as a bench seat. sorry will cut patch panels or windshield, or dash.

Re: cutting up a 72 k5
 

how much for skid plate

Re: cutting up a 72 k5
 

does it come with the cross member Glen

Re: cutting up a 72 k5
 

quarters were not nice enough to fool with. it has a hickey swinging tire carrier with jerry can mount 95% complete i will list in a couple days. there were almost 2 of them. all brackets inner and outer.

Re: cutting up a 72 k5
 

doors any good?

Re: cutting up a 72 k5
 

i have pics on another thread from the other day. look on my statistics and it will be near the top. make me an offer and yes, x member is included.

Re: cutting up a 72 k5
 

doors are whooped! panels and woodgrain are in mail to get restored, vents are driver.

Re: cutting up a 72 k5
 

Intersted in the tire carrier pending pics

Re: cutting up a 72 k5
 

pass on doors

Re: cutting up a 72 k5
 

no rear seatbelts. under brackets should be fine. will look after work. thanks

Re: cutting up a 72 k5
 

Glen need more pics LOL

Re: cutting up a 72 k5
 

the hickey too? picked up my old hickey fuel tank sunday. i reproduced it in stainless in my old k5. think i am going to do a run of 3 right off with electric fuel pump option in them.

Re: cutting up a 72 k5
 

i go to work in the dark so it will be tomorrow night before i can load some more.

Re: cutting up a 72 k5
 

How much total for the gas filler neck shipped to 65251?

Re: cutting up a 72 k5
 

Any hatch hardware from the top?
Complete hatch?

Re: cutting up a 72 k5
 

Keith, i have that one and another along with vent tower and inner and outer quarter if you want to graph it in a truck box. i will put up pics tomorrow of other if you want. then figure shipping

Re: cutting up a 72 k5
 

have to look tomorrow!

Re: cutting up a 72 k5
 

Great.
Just let me know.

I want your ECE panhard bracket from your other thread.
So maybe we can put everything in one box.
Send me a PM and I will get back to you.
Thanks.

Re: cutting up a 72 k5
 

4am is coming fast. will check in early and get pics after work tomorrow. thanks