Re: My new build thread: Stage 4!
 

Cool, got any pic's of your project? By the way, where is LaSalle?

Re: My new build thread: Stage 4!
 

I am right above Toledo, Oh.

I have posted pics of mine before, but here is another

6'' lift, 36.5'' tires. Got about $800 into it, including purchase price.
http://i99.photobucket.com/albums/l2...c/bbc009-1.jpg

Re: My new build thread: Stage 4!
 

Your not too far from me. I'm in Romulus, keep it up! we need more 1st gen blazers in Michigan.

Re: My new build thread: Stage 4!
 

Right on my K5 bro's! We have to deal with a little more of the rust issues than some, but just saving these K5's makes it worthwhile!

Re: My new build thread: Stage 4!
 

Yep, it is well worth the effort in my opinion.

Re: My new build thread: Stage 4!
 

Gotta tell ya litebulb, that K5 looks great with the canoe on it!

Re: My new build thread: Stage 4!
 

Pulled the old bug guard off today. Had some spider cracks in it so it has to go bye-bye. Here's some pic's of ripping over the weekend! More to follow.

Re: My new build thread: Stage 4!
 

The canoe got blown off Saturday/Sunday night in the storms

I just like how well they match

Re: My new build thread: Stage 4!
 

Looking at the rear floor, think I just need some patch panels for the rear. Front is in decent shape, think I can save it. Know more when I do the body mounts. Here's some more pic's.

Re: My new build thread: Stage 4!
 

Yeah, the front half looks nice. I saved a bed floor from a junked bed to get patches from when I get around to mine

Re: My new build thread: Stage 4!
 

Oh no! Any major damage ? To the K5 of course! The canoe is replaceable right! Gonna be ordering up some patch panels from WES soon, just gotta get caught up on the current bills. Good luck with the storm damage!

Re: My new build thread: Stage 4!
 

Gotta love pic's, ya'll got any? Thank god I have great daughters that are really computer smart!!! Helps me out a lot! My memory is not so great, so I need a hand now and then! Oh, more now then then!

Re: My new build thread: Stage 4!
 

Nope, the tornados hit all around us. Just had some strong wind blow the canoe off. The Blazer has had a number of tree branches fall on and not do any damage.

Re: My new build thread: Stage 4!
 

Cool, updated plans for your project K5? Pic's?

Re: My new build thread: Stage 4!
 

Updated Plans- get it sitting on 44'' boggers.
ETA- a few years.

My Blazer is mainly used for storage right now. I usually refer to it as the Blarage.
Though my ATC250R that I was storing in it, is almost complete as seen in my sig pic.

I took this pic while I had the camera out taking pictures of the R

http://i99.photobucket.com/albums/l2...blsc/yep-3.jpg

Re: My new build thread: Stage 4!
 

44's, eh? What you got planned for the drivetrain, axles, etc? Sounds like a plan. I got a little done today after work. Had one mirror bracket left on the drivers side, passenger side one has been gone for a long time. Had those swing away mirrors on it when I bought it, but am going back to original style arms. Couldn't get the 4 screws holding the 2 brackets to budge, so got out the grinder and took the heads off, pulled the brackets, and drilled the screws out! Problem solved. Got 2 new original style black mirror arms, inside door brackets, gaskets,screws, and the bigger rectangular heads in black ready , when doors are ready, which probably will be a while. I am trying to get at least something done every day now, so nice to have my K5 here in the yard so I can tinker with it at will!

Re: My new build thread: Stage 4!
 

Probably try to find a high pinion D60 to build for the front. If money would allow, I would build a Currie 9'' up for the rear.

It is all a dream right now. To use your way, as you see it now is stage 1. Stage 2 will be the same stuff, just restored to look and perform good. Then hopefully stage 3 will be the all out and wild with the 44'' boggers.

Re: My new build thread: Stage 4!
 

Sweet!! Dream on bro! I am thinking you may not need the high pinion 60 frt, but I may be wrong. I guess it depends on your setup. Currently running 39.5's with 8" superlift/cut fenderwells, and it's tight. 44's are really big! I have new weld on spring perches for my corp 14 bolt rear so I can angle my pinion some, not sure on the Dana60 front yet. Might have to drop the t-case just a wee bit to help with angle. Maybe not if I can afford the cv driveshafts fore and aft! Trying to decide what to rip apart tommorrow after work!

Re: My new build thread: Stage 4!
 

If you run a cv shaft, you are suppose to point the pinion of the axle right at the transfer case I believe.

My dad ran 39.5'' with a 6'' suspension and 3'' body. He had to slightly trim the fang on the front fender. This is on his 69 4x4 longbed

And I was thinking, I might not need a D60 at all. If I am dreaming, might as well dream big. Might be able to make a currie 9" front axle.

Re: My new build thread: Stage 4!
 

Got a little work done after work today. 4 bolts holding the old, twisted, rear step bumper on. Put the hand wrenches to them and broke 3 of the 4 bolts off! Cool! The last one was a oddball/round head bolt, couldn't get a wrench on it. Got out the trusty grinder and took care of that! Bam! bumper on ground! I can't believe the PO and the bondo on this K5, chunks of it a 1/2" thick in places. Chipped a lot of it away, kinda sad, big pile of rubble on the ground! That's ok, cause it's getting better every day! I love ripping this thing apart! Gonna go and start ordering up some parts from WES tonight.

Re: My new build thread: Stage 4!
 

Cool. Can't wait to see it all stripped of paint and bondo

Re: My new build thread: Stage 4!
 

Got a little more done after work again today, starting to be a serious habit! Took the frt passenger seat out, and the two seatbelt bolts going thru the step-up behind the seats. Seats originally came out of a 74 Laguna car. Where real nice years ago when I installed them, swivel out and comfortable. Kinda rough now, but restorable, to the pile they go for now. I plan on running some kind of racing seats front and back, mounted to the cage. A 4 seater! Yah!

Re: My new build thread: Stage 4!
 

A little more done today. Took the gas tank skid plate off, 4 bolts, no problem, tank still looks pretty good so far. Oh wait a minute it was 6 bolts, counting the 2 holding my custom stainless extended brake line bracket! Also yanked the old beat up radio antenna, just checking the cowl area for rust. Looks ok so far. Got a downhome mud bog/hog roast get down close to home tommorrow, and plan on dragging the wife there! Not running my rig, but I will take the camera! Gonna help my bud, ride along in his 2&1/2 ton rockwell axelled school bus. Push up the windows kiddies!

Re: My new build thread: Stage 4!
 

Mud bog plans fell through. Staying home with bonfire and cookout here instead!

Re: My new build thread: Stage 4!
 

Bonfire good, sent payment to Wes for 2 panels! Got 2 or 3 welders lined up for floor/bed resto. Local bud say's use custom metal, I want to use Wes's stuff. Gonna stock up on Panels and have it all done at once.