My time... Nothing New. But it's my Build.
5 Attachment(s)
Bought the truck in 2009. Never did anything to it but change the oil and eventually put a 454 big block in it...10 years later and motivated by the builds on this site, here's my attempt to build something as cool as I've seen throughout the years.
|
Re: My time... Nothing New. But it's my Build.
Welcome aboard! That’s a very sharp truck you have there! I’d love to see more pics of it. What are the current plans for it? I’m just about sure I will paint mine the same blue as yours.
|
Re: My time... Nothing New. But it's my Build.
Currently a long bed c20. Plan on shortening it...making it a SWB, swaping the leaf springs for trail arms, air bags and etc. Also got rid of the of the 454. Going twin turbo 5.3 with a 4L80E.
|
Re: My time... Nothing New. But it's my Build.
1 Attachment(s)
454 big block....my dad's choice as I was growing up. Therefore it was mine...going modern with the LS
|
Re: My time... Nothing New. But it's my Build.
5 Attachment(s)
5.3L. Forged pistons, rods and ARP studs.
|
Re: My time... Nothing New. But it's my Build.
Looks like a great place to start! Looking forward to seeing this one come together.
|
Re: My time... Nothing New. But it's my Build.
Sub'd, I like it!
|
Re: My time... Nothing New. But it's my Build.
5 Attachment(s)
BTR staged 3 cam, FITech engine management...KBS Motor coater paint (awesome stuff).
|
Re: My time... Nothing New. But it's my Build.
1 Attachment(s)
KBS motor coater
|
Re: My time... Nothing New. But it's my Build.
Looking awesome! I've never used the FiTech stuff, have you dove into it yet?
|
Re: My time... Nothing New. But it's my Build.
Impressive, did you have the short block machined?
|
Re: My time... Nothing New. But it's my Build.
Quote:
|
Re: My time... Nothing New. But it's my Build.
1 Attachment(s)
Quote:
|
Re: My time... Nothing New. But it's my Build.
4 Attachment(s)
Wasn't sure what turbo headers to go with. Seen a few different variations.
|
Re: My time... Nothing New. But it's my Build.
Awesome, who make the header pipe in the first pic?? thanks
|
Re: My time... Nothing New. But it's my Build.
1 Attachment(s)
Quote:
|
Re: My time... Nothing New. But it's my Build.
Could not tell from your photo but the bore looked newly honed....she cleaned up good then you added a party hat. ....yikes...hold on.
|
Re: My time... Nothing New. But it's my Build.
That thing is going to rip. Maybe one day I'll pull my engine back out and build it up like this.
|
Re: My time... Nothing New. But it's my Build.
5 Attachment(s)
Bed removed...need to do "something" with those leaf springs.
|
Re: My time... Nothing New. But it's my Build.
Yup, those leafs aren't going to love the power you're about to bring down on them . . .
|
Re: My time... Nothing New. But it's my Build.
5 Attachment(s)
My thoughts as well...hope this will sufffice.
|
Re: My time... Nothing New. But it's my Build.
2 Attachment(s)
Leaf springs and rear diff removed...really don't know what to do with the diff. Maybe a Ford 9 inch?
|
Re: My time... Nothing New. But it's my Build.
4 Attachment(s)
Decided to go with headers that put the turbos in an angle. Not quite sure what I want to do with the intercooler(s). A large single or duals?
|
Re: My time... Nothing New. But it's my Build.
Breakin out the big guns! I'm curious how you know you won't have any clearance issues.
|
Re: My time... Nothing New. But it's my Build.
5 Attachment(s)
Quote:
|
All times are GMT -4. The time now is 02:06 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com