Re: 1972 Chevy 4wd Longhorn Project: Never Ending Changes
 

Thanks. The seat is out of a 2004 2500 Dodge. The seat belts are new and from Wesco performance. I got the ones for bucket seats (11") and the GM labels on the latches. I am pretty satisfied with them. Make sure you get the hardware kit. I did not and I had to order these when I finally got around to installing them.

http://wescoperformance.stores.yahoo...sebe.html#welr

Thanks. I think I might go behind the tail light because it will give the most room for a fuel nozzle.

Thanks!

Re: 1972 Chevy 4wd Longhorn Project: Never Ending Changes
 

im on the fence with bed floor filler. what happens when you have seventy five sheets of OSB in the truck and need fuel? if i was to do a hidden it would be in the tail light. shes looking good! we want a burnout video!

Re: 1972 Chevy 4wd Longhorn Project: Never Ending Changes
 

either that or mount a motorcycle gascap on top of the bedside
http://www.jl-harley.com/var/ezwebin...rome_large.jpg

Re: 1972 Chevy 4wd Longhorn Project: Never Ending Changes
 

I'm with ya there. Only burn outs it'll be doing is on some different tires. Haha

Re: 1972 Chevy 4wd Longhorn Project: Never Ending Changes
 

The only problem with a motor cycle fill is you'd never get a large truck stop fuel nozzle in it. And that's a bad deal if that is the only nozzle around with diesel in it.

Re: 1972 Chevy 4wd Longhorn Project: Never Ending Changes
 

Dieselwrencher I have a Boyd welding 19 gallon cell and used a 88-98 Chevy door in my bed floor. My truck being a short bed any work I do with it I will most likely have a trailer behind me, but I also was concerned about the day I have a full pickup load and need fuel. Here's some pics, the door landed where the bed support is so that had to be notched.


http://i3.photobucket.com/albums/y65...psmtzlyns0.jpg

http://i3.photobucket.com/albums/y65...pszkivcdkg.jpg

Re: 1972 Chevy 4wd Longhorn Project: Never Ending Changes
 

Rgreathouse, that turned out nice!

I got some different front emblems from Shortie. They look closer to the originals compared to the ones I have on it now.

Re: 1972 Chevy 4wd Longhorn Project: Never Ending Changes
 

Dieselwrencher emblems are nice! Who made them?

Re: 1972 Chevy 4wd Longhorn Project: Never Ending Changes
 

Thanks. Member Shortie is making them. I also asked if he would be interested in doing the Cheyenne 30, 20, and Super badges. He said he might if there is enough interest.

http://www.67-72chevytrucks.com/vboa...d.php?t=701118

Re: 1972 Chevy 4wd Longhorn Project: Never Ending Changes
 

this is a cool truck!! subscribed for updates

Re: 1972 Chevy 4wd Longhorn Project: Never Ending Changes
 

Taillight filler would be good for a worker...

Re: 1972 Chevy 4wd Longhorn Project: Never Ending Changes
 

Those are some SWEEET emblems. :metal: :metal:

Re: 1972 Chevy 4wd Longhorn Project: Never Ending Changes
 

Thanks.

Hello Mick, how are you? Yes sir. Hopefully it can do some work before June. I saw you have your truck for sale on CL. Were you able to keep your firebird?

Yes they are. I'd like to see if he can make some for my 76 that mimic stock Cheyenne with a Cummins C instead just a C.

Re: 1972 Chevy 4wd Longhorn Project: Never Ending Changes
 

I definitely like those emblems. Very nice!

Re: 1972 Chevy 4wd Longhorn Project: Never Ending Changes
 

I'd like a set for my suburban grille like that, just "359". But I don't know which year grille I'm going with yet.

Re: 1972 Chevy 4wd Longhorn Project: Never Ending Changes
 

Very nice emblems Ryan! I really like the subtle custom touches.

Re: 1972 Chevy 4wd Longhorn Project: Never Ending Changes
 

Thanks.

PM him and I bet he'll design one after he gets all the others made up. I'd like to have him make some for the grill for the 76 too. I'd also like to get an Excursion name plate with the Cummins C instead of just a capitol C.

Thanks Mike. I have another cool bling part on the way that another member turned me on to. I can't believe I haven't seen anyone on here talking about them yet. You'll just have to wait to see what they are. :lol:

I did buy some shock mounts for the D60, adjustable bump stops for the rear suspension, and the secret shiny things too. Still no word on my converter. I bet the builder is at TS getting ready to race. I'd really like to get the trans back in this thing before June. I forgot to show a pic with the 35s on it. I stole them off the 76 since it's just setting around any way. :lol:

Re: 1972 Chevy 4wd Longhorn Project: Never Ending Changes
 

Those wheels look good . I'm still a fan of your fat steel wheels with the period correct hub caps on em . Nice to see your still moving fwd. It never stops does it . Lol.

Re: 1972 Chevy 4wd Longhorn Project: Never Ending Changes
 

I'll probably put them on again. We'll have to see. I really like this look too. Yeah, it never seems to stop. There's always something else. :mm: this week I also ordered some wheel spacers for the front, and an AFC live stage 2 for fuel control.

Re: 1972 Chevy 4wd Longhorn Project: Never Ending Changes
 

oh yeah, keeping the Firebird. just needed to downsize total number of vehicles, and get something more suitable for family towing requirements. Got something different already, but can't mention it here :)

Re: 1972 Chevy 4wd Longhorn Project: Never Ending Changes
 

It must be a Ford. :lol: It's ok. These guys just don't know what a real truck is. :mm: I miss my 95 F350 every day. :( And I really miss my old 05 F350. Even for a 6.0, it was a sweet truck.

Yesterday my converter shipped! Now to get this pig put back together. The goal is to drive it in July. I'd like to actually drive it in June but we'll see.

Re: 1972 Chevy 4wd Longhorn Project: Never Ending Changes
 

real truck... ha.

we cut up every one of them. they all suck from the OEM.

Re: 1972 Chevy 4wd Longhorn Project: Never Ending Changes
 

I knew that comment would lead to more. :metal:

Re: 1972 Chevy 4wd Longhorn Project: Never Ending Changes
 

Finally made it through this thread, your truck is sweet!

For the Ford comment I work my '02 pretty hard and it's always up for the task!
http://i40.photobucket.com/albums/e2...29D84BB479.jpg

Re: 1972 Chevy 4wd Longhorn Project: Never Ending Changes
 

Thanks. I really like Ford trucks. Especially 84 up. A 97 CC LWB and a 05 cc lwb are my favorites.