Re: Tami's 51 build
my painter friend told me once that if I thought my life was boring and uneventful, to paint a car shiny black.
looks beautiful! |
Re: Tami's 51 build
I'm gonna hafta paint mine flat white then, haha.
|
Re: Tami's 51 build
Looks really good Skip....
Marc |
Re: Tami's 51 build
I built this entire bed by hand, flush led lights,
Now this is just the first coat of clear on everything, ill sand it again, then do the flames and candy, then multiple coats of clear to bury the tape lines, im so sick of sanding....☹️ http://67-72chevytrucks.com/gallery/...E1ABC6297.jpeg |
Re: Tami's 51 build
Quote:
|
Re: Tami's 51 build
Quote:
Marc |
Re: Tami's 51 build
Spent the last two full days laying out the flames....
http://67-72chevytrucks.com/gallery/...C2BFD51CA.jpeg |
Re: Tami's 51 build
|
Re: Tami's 51 build
That’s going to be beautiful.
|
Re: Tami's 51 build
That looks like it took some time....Looks good.
Marc |
Re: Tami's 51 build
|
Re: Tami's 51 build
It sparkles like it has leds in it! As soon as sun comes out ill get some pics.
http://67-72chevytrucks.com/gallery/...9839161CB.jpeg |
Re: Tami's 51 build
I dig how subtle the flames are. They are not nearly as in your face like I thought they might be. Nicely done Skip
|
Re: Tami's 51 build
Quote:
|
Re: Tami's 51 build
Quote:
|
Re: Tami's 51 build
I am thinking of doing something like that on my 57. possibly some ghost flames with a small haligan subtly shaded in on a corner, or possibly something else to denote the firefighter career.
would like to see the pics in the sun, should look awesome. |
Re: Tami's 51 build
Quote:
Tami loves it! http://67-72chevytrucks.com/gallery/...816B8B9837.png |
Re: Tami's 51 build
Decided to get carried away..started boxing the frame, ordered a welder series triangulate four link, ran into a few issues, nothing that cant be fixed , but in hindsight it would have been better to not have the front lower brackets welded beforehand, the issue is the frame is not parrallel to the rear, so the bracket needs to be cut at an angle so the arms pivot parallel t9 the rear, like i said if the lower eyes were loose, i could have simply rotated them square and welded them.
http://67-72chevytrucks.com/gallery/...A90A95690.jpeg |
Re: Tami's 51 build
Finished boxing, getting ready to tack the four link in!
http://67-72chevytrucks.com/gallery/...BE86E7B62.jpeg |
Re: Tami's 51 build
Working on the four link, proved to be a pain in the ass to get lined up. Used a welder series kit, but since my original frame is angled, i had to trim the already welded brackets in the kit, i would have been better off ordering only the rear brackets and tube ends welded, Other than that it wasnt bad..
http://67-72chevytrucks.com/gallery/...02B6B4041.jpeg |
Re: Tami's 51 build
Wow, boxing and finishing the welds took forever! Not to mention i changed the 4 link mounting brackets about 4 times, i ended uo just chunking the front lower brackets in the kit, and just made my own,
http://67-72chevytrucks.com/gallery/...07520EBF9.jpeg http://67-72chevytrucks.com/gallery/...BD235B3AB.jpeg |
Re: Tami's 51 build
Skip, kinda looks like the stab bar may interfere with suspension parts of 4 link. Have you checked out a reverse bar pointing rearward? Maybe just the pics made it look close?
|
Re: Tami's 51 build
Quote:
|
Re: Tami's 51 build
Inline tube had the fittings needed to be able to plumb like this
http://67-72chevytrucks.com/gallery/...630D6CF08.jpeg http://67-72chevytrucks.com/gallery/...EECBF1D33.jpeg http://67-72chevytrucks.com/gallery/...55AC24C98.jpeg http://67-72chevytrucks.com/gallery/...D3D103CF1.jpeg Front brakes from speedway, qa1 coilovers from summit |
Re: Tami's 51 build
Skip, nice and clean looking set-up...Jim
|
All times are GMT -4. The time now is 08:50 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com