The first ever 73-91 Burb post your ride thread!
 

Ok guys,

I've decided to try to see how many burbs we got on here to test the waters for a possible TOTM poll or maybe a Featured ride/project every month. So lets see em! Pics are mandatory and some info on them, (yr, drivetrain, future plans etc) would be really great!

Thanks guys!

Brian

1990 Chevy Silverado Suburban,5.7, 700r4, 3.42 rear with posi, towing package and power mirrors and ice cold a/c front and rear :D

http://a0.cpimg.com/image/F6/31/3971...-02000180-.jpg

You can see how clean the engine is....no leaks :D
http://a9.cpimg.com/image/07/42/3971...-02000180-.jpg

Original dash with no cracks :D
http://a2.cpimg.com/image/94/2E/3971...-02000180-.jpg

http://a4.cpimg.com/image/48/44/3971...-02000180-.jpg

http://a3.cpimg.com/image/67/34/3971...-02000180-.jpg

http://a3.cpimg.com/image/D3/1F/3971...-02000180-.jpg

http://a8.cpimg.com/image/32/4B/3971...-02000180-.jpg

http://www.nastyz28.com/~patgizz/trucks/burb1.jpg

i'll be getting better pics soon. right now thats all i have cause the interior is full of new parts that i'm in the process of installing.

1990 silverado 1500. 2wd. towing package. tinted glass. new 355 bottom end, gmpp hyd roller cam, gmpp vortec heads, performer rpm vortec intake, custom machined adapter, TBI, a/c deleted, summit racing th350, 2,200 stall converter, aluminum driveshaft, 3.73 rear, working on getting rid of the woodgrain...

my 89 body swap
 

I have a 80 3/4 4x4 frame to put a 89 tub on it. Soon to have a 6 inch lift with 35's I do have the correct support off another 89 i am parting out.

http://coloradok5.com/photos/data/500/000_1531.JPG


mods are in the my sig.

future mods are:
14FF with detriot locker and disk brakes
Clocked t-case with flat belly pan
1" Body lift (for the clocked t-case)
14" travel shocks up front / Ford shock mounts
Rock sliders
custom rear bumper

Man, you guys got some nice burbs there! Keep em coming!!!

Oh my...I love that burb, I was actually looking for a 4x4 burb when I bought my 2wd....the deal was just to good to pass up.

nice burb :metal:

thanks. your burb is pimp. I still want to get an 2wd burb and pimp it out :metal:

here is what i have statred with
 

pic of 80 3/4 4x4

nice one bisquik65 that looks like the perfect terrain for a burb :) now if i could just figure this pic posting out.......

pic
 

here is a pic from my front yard.

I nominate bisquik for the official chevytrucks.com yard of the month ;)

I second that nomination :metal: :p

My truck: 1986 Chevy Suburban C10 in Silverado trim. 350 SBC mated to a TH7004R and 3.73 rear end. Bone stock except for a K&N air filter, Edelbrock Performer IAS shocks, Flowmaster Delta Flow 3-chamber muffler, Crime Guard keyless entry, Pioneer 6-CD changer in the center console, and a small power booster for the rear speakers.

One neat aspect to my truck is that the original factory grease pencil markings are still on the radiator core support and the firewall, even after all these years. :)


A shot from when I lived in Spruce Pine, just down the road from Bisquik65...
http://www.boo.net/~kpshortell/Chevy/NCSub.jpg


From the Carlisle All-GM Nationals last year (2003):
http://www.boo.net/~kpshortell/GMCar...3/2003SUB1.jpg

http://www.boo.net/~kpshortell/GMCar...3/2003SUB2.jpg


My favorite part about the Carlisle All-GM Nationals this year (2004) :D :
http://www.boo.net/~kpshortell/GMCar.../2ndPlace1.jpg

Yes sir, I've had my truck 11 years now and still love it as much as ever. :bowtie:

kevin if you bring your burb to carlisle, watch your bumpers, they might disappear cause my rear is bent bad ;)

You have not seen anything yet
 

More pics from the appliations coming soon. This is my playground. At 5,300 feet. Next time i am up there with the bears and the deer.

i dont have any good pics but here are some of my 89 no engine mods yet execpet filter, suspension mods include bags up front axle flip in rear ( bagged someday) i have 12gal of air filled by a york engine driven comp, 1/2" lines runs 3/8" smc valves. exterior has shaved rear handles, mouldings and antenna and a roll pan. interior has some tweed and billet done to it. future interior mods will be 4 bucket seats with a full length console. some pics are older than others but arent in any order.
http://memimage.cardomain.net/member...71_82_full.jpg


http://memimage.cardomain.net/member...71_97_full.jpg

http://memimage.cardomain.net/member...71_91_full.jpg

http://memimage.cardomain.net/member...71_93_full.jpg
and try not to hate on my spinning hubcap (it was freee)
http://memimage.cardomain.net/member...71_69_full.jpg


http://memimage.cardomain.net/member...71_96_full.jpg

http://memimage.cardomain.net/member...71_94_full.jpg

this is my 1987 it was a trade in got it for $500.00 runs good I got it to put a deer in after i get on LOL

Daily Driver
 

Here is my 87 Burb daily driver. I bought this about 3 months ago so I could get the factory "Bud" rims for my 72 pickup. I didn't pay a lot for it and started to drive it and really like it.There are 207k /120,000 miles on her and iIts got a bench front seat and a 350 with 700R4 and 3:08's in the rear so the mileage is decent.There si minimal rust for an 87 and we are in the sno belt here. If you look close at the rear pic you can se wheere I put duct tape over the rust hole so the water won't get in when I wash her. I like it so much I am trying to sell it and want to get a 89 to 91 with the different front clip and I'd want buckets and the 3rd seat as well as rear ac/and or heater.

Here is my baby. The second suburban in our family and my first car. Has served me well since I have been driving and hope to continue to for a very long time.
http://image34.webshots.com/35/9/46/...1eJveHC_ph.jpg

1982 Burb
 

Hi Guys ,

there is mine :
http://forum-dreams-cars.net/upload/...=ST&f=3&t=189&

it is a 1982 Burb , imported from Texas in 1995 , plans are to put a 1979 front clip , I still have to buy a left inner fender & front fender , the rest of the pieces I will use come from a 1979 parted out long bed C-10 .

used to have a 6.2 Diesel in it , engine broken when I bought it ( traded in , in fact , for a 1979 Yamaha XS650SE , which had become a real piece of s**t , was about 500€ worth... ) , had a TH700R4 in it

now , it has a gassed 260ci Oldsmobile engine in it ( don't ask , please :D ), with a TH400 , but I will get for my X-mas a 350 Olds engine , coming from a Cad Seville 1978 ( still have to prove I was a good boy , though... )

should be ready to hit the road at half 2005 , for the Antwerp annual meeting ( 3d sunday of August ) in Belgium ( Yeah , I know , Where the f**k is Belgium ? :D )

6.2 engine almost sold ( 250€ ) , had a connecting rod / crankshaft problem , still have a TH700R4 for sale

have no time and no $$$$$ to work on it right now , still busy to improve the home ( costs hell of $$$$ )

gretzzz

the Baron

90 burb,stock 350(stock everything)
 

6" procomp lift,tired springs in the back,dual front shocks.I will be getting a new carpet kit,new 6" rear springs and a paint job very soon

How's this for ugly?? :) 89 4wd 244,000 miles 350, 4 speed granny, rear a/c.

Here is mine, It is a 4x4 1990 2500 Chevy Suburban with 6" suspension and 3" body lift running a set of 38" Radial Swamper TSL's.

http://www.burben.com/www-BURBEN-com/burb001.jpg
http://www.burben.com/www-BURBEN-com/Bigwater03.jpg

Pics of my buildup here:
The build up
BURBEN.com

Here's mine, still working on it. This is right after the installation of the 2" lift, and new front end parts.

http://www.supermotors.org/getfile/1...iver's.jpg