The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Blazer and Suburban Stuff (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=199)
-   -   PA Rippens believe it or not another 72 blazer 3ott part out (https://67-72chevytrucks.com/vboard/showthread.php?t=793051)

1rippen6 09-06-2019 06:22 PM

Rippens believe it or not another 72 blazer 3ott part out
 
5 Attachment(s)
Seats weren't originals

Sunvisor brackets no visors but does have all mounting hardware 100 shipped SOLD

Single wall top decent shape with brackets but no top strips (sold already)and a destroyed hatch. The only part on the hatch is the soft ray glass. Top has soft ray also but I suspect drivers side is double wall glass. The single wall gasket was inside and matches the passenger side. Drivers side gasket doesn't fit snug its lose on the top. The one corner has a chip and 2 small cracks by the rear glass. SOLD

72 307 engine C10/20 complete with accessories fan and spacer are there just not pictured. Manifolds are 4x4, 2 barrel carb. 400 plus shipping through Fastenal. SOLD



3 speed with all associated parts 150 plus shippingTRANNY AND TRANFER SOLD EVERYTHING ELSE STILL AVAILABLE
Steering column, bell housing, tranny, transfer, crossmember any everything else. It has a 3 speed on the floor conversion so so no column to tranny rods.

Randy500 gets first chance at the seat channel once I cut it out.

1rippen6 09-06-2019 06:38 PM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
3 Attachment(s)
Pics

NJKelly 09-06-2019 08:02 PM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
Quote:

Originally Posted by 1rippen6 (Post 8588910)
Pics

Hey Dwayne, how much for the driver side fender? Did it have an inside spare tire carrier? Interested in the passenger side fender as well if in decent shape, no rust through but surface rust okay if metal underneath is solid

NJKelly 09-06-2019 08:05 PM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
Quote:

Originally Posted by 1rippen6 (Post 8588910)
Pics

Grill also if good

1rippen6 09-06-2019 08:15 PM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
Quote:

Originally Posted by NJKelly (Post 8588945)
Grill also if good

I'm in partners with my brother in law on this one and he posted the whole front end on a Facebook group so I'll see what happens there. Passengers side fender has holes. I'm going to try and remove the fender pictures in this thread.

Eagle9502 09-06-2019 08:17 PM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
4x4 dipstick & tube?

1rippen6 09-06-2019 08:25 PM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
Quote:

Originally Posted by Eagle9502 (Post 8588952)
4x4 dipstick & tube?

Not sure, I didn't look but if it is it will go with the engine.

NJKelly 09-06-2019 09:00 PM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
Quote:

Originally Posted by 1rippen6 (Post 8588951)
I'm in partners with my brother in law on this one and he posted the whole front end on a Facebook group so I'll see what happens there. Passengers side fender has holes. I'm going to try and remove the fender pictures in this thread.

Ok, thanks

tmontg01 09-06-2019 10:50 PM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
Gas pedal assembly?

DeadheadNM 09-06-2019 11:37 PM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
Any decent frame clips clamps for tubes and harness I’d be interested in Dwayne. Thanks.

Martyt 09-06-2019 11:39 PM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
Pm sent!

1rippen6 09-07-2019 07:54 AM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
Quote:

Originally Posted by tmontg01 (Post 8589008)
Gas pedal assembly?

It's there, are you interested in the cable also or just the pedal. I'll get it pulled this weekend and get some pictures.

1rippen6 09-07-2019 07:54 AM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
Quote:

Originally Posted by DeadheadNM (Post 8589029)
Any decent frame clips clamps for tubes and harness I’d be interested in Dwayne. Thanks.

I'll check them out.

Quote:

Originally Posted by Martyt (Post 8589030)
Pm sent!

Replied

richard2717 09-07-2019 08:19 AM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
how much for the soft ray hatch glass if you will separate from the top? you going down to VA anymore this season?

1rippen6 09-07-2019 08:43 AM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
Quote:

Originally Posted by richard2717 (Post 8589110)
how much for the soft ray hatch glass if you will separate from the top? you going down to VA anymore this season?

Sorry, I don't want to separate at this time. I have 2 more trips planned for this year.

1rippen6 09-07-2019 09:31 AM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
5 Attachment(s)
More top pictures

1rippen6 09-07-2019 09:33 AM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
5 Attachment(s)
More

1rippen6 09-07-2019 09:34 AM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
4 Attachment(s)
Last ones

1rippen6 09-07-2019 09:39 AM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
2 Attachment(s)
Quote:

Originally Posted by tmontg01 (Post 8589008)
Gas pedal assembly?

45 shipped if interested

tmontg01 09-07-2019 11:01 AM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
Quote:

Originally Posted by 1rippen6 (Post 8589090)
It's there, are you interested in the cable also or just the pedal. I'll get it pulled this weekend and get some pictures.

I will take that with the throttle cable as well please, PM me your PayPal and total with the cable as well. Thank you! If there happens to be the center speaker with brackets it’d take that too.

randy500 09-07-2019 12:36 PM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
Drivers side seat slider? Those look like they could be original but modified a little?

72blzrWA 09-07-2019 01:55 PM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
Interested in that transfer case shifter knob if it's decent (7/16" thread only). radio, wiper blades, front rain deflectors for double wall top.

In line for center speaker, inside spare tire carrier. Thanks Dwayne!

72blzrWA 09-07-2019 03:17 PM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
Also interested in dashboard if it's not cut or rusted out. Thanks.

1rippen6 09-07-2019 04:04 PM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
Quote:

Originally Posted by randy500 (Post 8589217)
Drivers side seat slider? Those look like they could be original but modified a little?

Good eye they are the only original piece of the seats but I'm keeping them.

1rippen6 09-07-2019 04:06 PM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
Quote:

Originally Posted by 72blzrWA (Post 8589243)
Interested in that transfer case shifter knob if it's decent (7/16" thread only). radio, wiper blades, front rain deflectors for double wall top.

In line for center speaker, inside spare tire carrier. Thanks Dwayne!

I'll get you some pictures tomorrow and check the tread size on the knob. It's a Dana 20 so I'm not sure.


All times are GMT -4. The time now is 10:01 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com