Re: 85 C10 LT/6L80 Frame off build
 

Looks awesome Luke. I’m looking forward to seeing it around town and hopefully at LS Fest

Re: 85 C10 LT/6L80 Frame off build
 

Just awesome man! What are the specs on the exhaust pipes? Love the subtle factory style...

Re: 85 C10 LT/6L80 Frame off build
 

Thanks, the exhaust is Hooker C10 swap 2.5" exhaust in 304 Stainless

several options available

https://www.holley.com/products/engi...ap_components/

Re: 85 C10 LT/6L80 Frame off build
 

Thanks guys, hang around I'll post up more pics

Re: 85 C10 LT/6L80 Frame off build
 

The alternator wire isnr getting warm.is it? Hard to tell how beefy it is but I installed some stock Camaro e fans on a build and that wire happend to be to small. Another note, is that a new 4 core rad support bracket? If so where did you source it from?
Fantastic build!

Re: 85 C10 LT/6L80 Frame off build
 

its a 4 ga wire so no worries there, the radiator cover is from LMC.

Re: 85 C10 LT/6L80 Frame off build
 

luke,
Thanks again for sharing this build. I re-read the thread again:metal: & did not see what you did for your trans linkage? would you be willing to share how you connected the trans to the steering column (in relation to shift linkage)?
Also I was wondering if you would share what wires on your firewall block (truck) you are using on the engine portion to the LS? I would like to know what wires you used from the truck part of the harness?

thank you again & I am following along on the blazer build too!!
;)

Re: 85 C10 LT/6L80 Frame off build
 

Not sure if this was posted, but CONGRATULATIONS Luke!

https://www.streettrucksmag.com/old-...-84-chevy-c10/

Re: 85 C10 LT/6L80 Frame off build
 

Very nice article.... Congrats!

Re: 85 C10 LT/6L80 Frame off build
 

Good coverage of the truck and a well-written story. Congratulations Luke!

Re: 85 C10 LT/6L80 Frame off build
 

https://67-72chevytrucks.com/vboard/...1&d=1580701233

Luke, are the right angle hard lines part of the kit? I ask because the V/A installations I've done run the heater and refrigerant hoses through the firewall into the interior. An accident waiting to happen, IMO, especially with heater hoses.

Re: 85 C10 LT/6L80 Frame off build
 

Mike,
The V.A. "sure fit" systems includes everything needed to replace a factory A.C. system, so yes the right angle hard lines are part of the kit. I have the same version in my build & the 4 lines run through the firewall with a supplied cover plate. when I did my '72 I used a "universal" kit setup & I did what you have done, I felt the same way, although I did not connect the heater hoses (I'm in the desert and it was a show truck). I would feel comfortable to run them how V.A. instructs to do it. I feel V.A. is a quality system with many satisfied customers. I am on my second system personally & very happy.
hope this helps.:metal:

Re: 85 C10 LT/6L80 Frame off build
 

Thanks, I just noticed that on the instruction sheet for the Gen IV unit. Lots of improvements over my 69 C10's 1998 system.

Re: 85 C10 LT/6L80 Frame off build
 

luke, just noticed a thread about the holley truck bed mat..... and the truck "model" looks really familiar.. :metal: do you know anything about the truck model...;)
either way still a VERY NICE build... :ito:

Re: 85 C10 LT/6L80 Frame off build
 

Been awhile so I thought I’d share a few updates. Swapped out the brakes to a new set up, changed to blue interior, manual T56 swap. More pic to come later today.

Re: 85 C10 LT/6L80 Frame off build
 

He works for/at Holley.

Re: 85 C10 LT/6L80 Frame off build
 

Looks better than new. No detail overlooked.http://67-72chevytrucks.com/vboard/i...ons/icon14.gif

Re: 85 C10 LT/6L80 Frame off build
 

Agreed.

Re: 85 C10 LT/6L80 Frame off build
 

Wash job today, getting ready for a local car show next weekend

Re: 85 C10 LT/6L80 Frame off build
 

Then off to Home Depot for lumber and gravel!

Re: 85 C10 LT/6L80 Frame off build
 

Im glad I read through this thread today. I was not aware that anyone was making nice bed mats for the 73-87 trucks so I just ordered one from Holley.
Thanks
Frank

Re: 85 C10 LT/6L80 Frame off build
 

Can't wait to see your next update Luke. I have a couple of questions, where did you pull your vacuum from? Also, how did you set up your PCV system?

I'm doing an L86/8L90 swap in a 93 and an 84. In the 93 I used Dirty Dingo adjustable motor and transmission mounts and they worked out great. There's not issue with the tranny tunnel and the factory headers as well as the factory gear selector mechanism bolted right in. I also used the holley LT mid-mount setup and it looks great, pic included.

Any suggestions on what brackets to use on the 84? Will any of them work with 8L90? Am I going to have to find a high hump transmission cover? Sorry for all of the questions, but appreciate any advice that you can pass on. Take care,

Rob

Re: 85 C10 LT/6L80 Frame off build
 

Looks great! Do you mind sharing the details on your brake setup and master cylinder?