The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   99+ Chevy and GMC Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=59)
-   -   MO WTB High Idle Switch (https://67-72chevytrucks.com/vboard/showthread.php?t=690753)

esbstuff 12-06-2015 06:28 PM

WTB High Idle Switch
 
1 Attachment(s)
WTB High Idle or PTO Switch for a 99-07. I need the switch, bezel and at least some of the wiring... Shipped to 65584.

This is located just to the right of the HVAC controls if the truck has it...

Thanks!

esbstuff 12-21-2015 01:24 AM

Re: WTB High Idle Switch
 
ttt...

esbstuff 07-31-2016 01:51 AM

Re: WTB High Idle Switch
 
ttt...

esbstuff 11-20-2016 03:51 PM

Re: WTB High Idle Switch
 
Bump

esbstuff 07-04-2022 03:05 AM

Re: WTB High Idle Switch
 
ttt...

biketopia 08-02-2022 11:49 AM

Re: WTB High Idle Switch
 
depending on your engine and trans you can do this with a single wire into the ECM powered off the brake switch. I know on my 03 duramax I ran the wire and would just have to set the parking brake then you would hit the cruise button for one set point and the resume button for a slightly higher set point. Tap the brakes and it would cancel out, if it was in gear it obviously wouldn't engage, cruise would work as normal.


All times are GMT -4. The time now is 06:19 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com