Re: 1978 Russet Metallic 4x4
 

I'm still waiting on the wheels, but I accomplished some things today:

• Installed Correct Color Temp HID Bulb on the Driver's Side
• Installed GM Compass Accessory and Convex Mirror Overlay (Dad Likes Them)
• Got the Truck Inspected and Registered
• Checked Fluids and All Functions (Gas Gauge Indicator is Weirdly Offset)

Re: 1978 Russet Metallic 4x4
 

I tightened up the fog lamps. Had the steering aligned. Still have a mystery clunk under the driver's feet. Got the new Ramsey stickers, but I'll wait to install. I have the Daystar Isolator for the winch cable coming with a new winch controller. Still need to cut the custom mud mats. I'm keeping the steps covered until the unveiling with Dad. Here are some updated pictures (good light):

Oilfield Truck
http://67-72chevytrucks.com/gallery/...4-1280x720.jpg

http://67-72chevytrucks.com/gallery/...8-1280x720.jpg

Just Awesome

http://67-72chevytrucks.com/gallery/...R-1280x720.jpg

http://67-72chevytrucks.com/gallery/...R-1280x720.jpg

http://67-72chevytrucks.com/gallery/...R-1280x720.jpg

http://67-72chevytrucks.com/gallery/...R-1280x720.jpg

Re: 1978 Russet Metallic 4x4
 

Beautiful. Did it come with intermittent wipers or did you retrofit them?

Re: 1978 Russet Metallic 4x4
 

Retrofit.

Re: 1978 Russet Metallic 4x4
 

killer truck.

Re: 1978 Russet Metallic 4x4
 

Thanks amigo. :)

Re: 1978 Russet Metallic 4x4
 

I find the custom bumper to be remarkably built and aesthetic in an honest 70s way. That sucker is stout. It has Hickey style hooks welded to the bottom. One is bent from serious yanking.

Re: 1978 Russet Metallic 4x4
 

Having the driveshafts rebalanced just to make sure they're true. Getting touchup powdercoat where my guy was "Test Fitting" the side steps. Still waiting on wheels. A few items I'm trying to figure out without much luck:

1. There's a clunk under the driver's feet when I do most anything driving that makes the setup flex. I can't see anything binding or contacting. I'm wondering if there's some kind of body buckle thing going on. Any ideas? Experience?

2. There's a lot of rattle coming from the rear tailgate. What do I need to look for when I open that up?

Re: 1978 Russet Metallic 4x4
 

The clunk under your feet makes me think of the shackle bushing in the frame, has it been replaced?

Re: 1978 Russet Metallic 4x4
 

It's not that. All new stuff.

Re: 1978 Russet Metallic 4x4
 

Did you have new driveshafts made? I'm wondering if one of them is bottoming out.

Re: 1978 Russet Metallic 4x4
 

Might be worth checking. Thanks. Just had them pulled and rebalanced. About to reinstall. I'll see if there's enough slip.

Re: 1978 Russet Metallic 4x4
 

Beautiful Blazer! I also love the bumper!

Re: 1978 Russet Metallic 4x4
 

Super nice original Blazer...

Re: 1978 Russet Metallic 4x4
 

Thanks guys. Once i get the rims, I'll be able to feel a sense of completion.

Re: 1978 Russet Metallic 4x4
 

Waht wheels are you going with? Stock steel wheels with hub caps?

Re: 1978 Russet Metallic 4x4
 

The factory rally wheels punched out to 16s that Stockton Wheel produces. I'll run the plastic caps until I hunt down a nice set of NOS.

Re: 1978 Russet Metallic 4x4
 

Very Nice!!!!!!!!!!!!

Re: 1978 Russet Metallic 4x4
 

This was missing on the other tailgate rod. That's the tailgate rattle.

http://67-72chevytrucks.com/gallery/...-1280x1706.jpg

Re: 1978 Russet Metallic 4x4
 

Has anybody else experienced a clunk at the driver's feet that they figured out. Again, I can't find any suspension contact or such. Seems to show up with any flex (turn, bump, etc). The driveshaft isn't it. It's not a little clunk. It's solid.

Re: 1978 Russet Metallic 4x4
 

I assume that the cab supports are good and rust free? On my cab I had a metallic noice when flexing. It was the front cab support that was loose from the floor board, spot welds had kind of rusted away. So the cab floor was separating and hitting the support when rough terrain or flexing was there. New supports and spot welds fixed that. But I doubt that is what it is with yours....

Re: 1978 Russet Metallic 4x4
 

Cool. I'll keep looking.

Re: 1978 Russet Metallic 4x4
 

Can you duplicate the sound lifting the RF tire with a floor jack? It might be easier to tell where it's coming from that way.

Re: 1978 Russet Metallic 4x4
 

Opinion: What do y'all think about going with the 77 yellow stripe in the aluminum trim instead of the black? Seems like that might tie the interior to the exterior even better?

Re: 1978 Russet Metallic 4x4
 

I'm out of town for a few days, so won't be doing much. Just need to play with it, I guess. What would that show?