Anyone can buy an SWB...
Been away for a minute. Started my MTP a year ago, this truck is one of the goals along the way. Started as a bone stock BB/auto then i did a moderate resto-mod and enjoyed it for a few years. Ive been cutting and reworking a LWB chassis to get the perfect stance for this conversion.
|
Re: Anyone can buy an SWB...
4 Attachment(s)
|
Re: Anyone can buy an SWB...
5 Attachment(s)
|
Re: Anyone can buy an SWB...
5 Attachment(s)
|
Re: Anyone can buy an SWB...
Very nice truck. Clean work you are doing there as well!
|
Re: Anyone can buy an SWB...
4 Attachment(s)
|
Re: Anyone can buy an SWB...
4 Attachment(s)
Quote:
Attachment 1973631 Attachment 1973625 Attachment 1973632 Attachment 1973626 |
Re: Anyone can buy an SWB...
5 Attachment(s)
|
Re: Anyone can buy an SWB...
5 Attachment(s)
|
Re: Anyone can buy an SWB...
5 Attachment(s)
|
Re: Anyone can buy an SWB...
3 Attachment(s)
|
Re: Anyone can buy an SWB...
5 Attachment(s)
|
Re: Anyone can buy an SWB...
5 Attachment(s)
|
Re: Anyone can buy an SWB...
5 Attachment(s)
|
Re: Anyone can buy an SWB...
2 Attachment(s)
|
Re: Anyone can buy an SWB...
Very nice. Suspension mods are clean.
|
Re: Anyone can buy an SWB...
Very nice work, how much did you section the front cross member? I like the frame mods to raise the steering box and centerlink.
Rg |
Re: Anyone can buy an SWB...
Very nice work ... What does MTB stand for?
|
Re: Anyone can buy an SWB...
Quote:
Quote:
|
Re: Anyone can buy an SWB...
5 Attachment(s)
Quote:
Attachment 1973777 Attachment 1973771 Attachment 1973772 Attachment 1973766 Attachment 1973767 |
Re: Anyone can buy an SWB...
5 Attachment(s)
|
Re: Anyone can buy an SWB...
5 Attachment(s)
Motor/trans position is slightly higher, Output shaft is 2.8 degrees, carb surface is .1 degree off level at ride height of 5 3/8”. The BB CPP mounts were a terrible fit. Took reengineering to make them fit correctly. This and also needing the extra clearance between drag link n oil pan caused the z-bar position to change. Enjoy the Handsome bracket below !
Attachment 1973805 Attachment 1973806 Attachment 1973807 Attachment 1973808 Attachment 1973809 |
Re: Anyone can buy an SWB...
4 Attachment(s)
Z-bar off a 6-cyl. Sectioned tube, made, moved & reclocked lower arm.
The throw is butter smooth and effortless. Upper pushrod is thin wall tube w/bolts welded at ends. Attachment 1973828 Attachment 1973829 Attachment 1973830 Attachment 1973845 |
Re: Anyone can buy an SWB...
Totally awesome. Great work!
|
Re: Anyone can buy an SWB...
5 Attachment(s)
Quote:
My experience with an aftermarket panel bed: i see this often on even some high end builds where the bed caps are level w/ the cabs upper bodyline and the lower bed line is 1/2 or better too high... i fixed this by sectioning the front stands and rear rail ends. The other 2 cross sills were sectioned to match. Dont know how one could live w/such a poor off the boat fit. Attachment 1973852 Attachment 1973858 Attachment 1973853 Attachment 1973861 Attachment 1973859 |
All times are GMT -4. The time now is 04:23 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com