Gmc 351e big block v6
 

GMC 1966 351E big block V6 out of a suburban that had 4 speed. Dressed pretty much as it was removed. Ran good when removed, suburban was customized reason for removal. It has PS installed and dealer installed AC parts in box (date coded 12/65). Price $500, needs to go, local pick up. Trying to sell whole to some one who needs, other wise will strip for parts. More photos if needed. AC parts are in a box not installed, under dash type unit by Eaton.

Still editing

Re: Gmc 351e big block v6
 

Interested in PS including pulleys if you part out

Re: Gmc 351e big block v6
 

So, These are my questions
1) is the Y pipe in tact or cut?
2) is the air cleaner not with it?
3) is the 4 speed still attached and does it come with it or available separately?

Re: Gmc 351e big block v6
 

The gentleman that owns or runs https://www.olsonsgaskets.com/ (pretty much the only place I can find oil pan gaskets for the GMC v6) needs a donor engine to reverse engineer the rear seal gasket.

I'm guessing this engine is likely the same internally as the 305 (for his purposes) with the exception of the pistons/cylinders?

You may see him pop into the classifieds.

He saved my bacon because he has gaskets for our trucks.

Re: Gmc 351e big block v6
 

Where is he located?

Re: Gmc 351e big block v6
 

looking on the website it seems it might be Port Orchard, WA , which I guess isn't close to where the engine might be.

Re: Gmc 351e big block v6
 

probably gonna have to do a better job of answering questions if Aotte wants to sell anything on here

Re: Gmc 351e big block v6
 

PM sent Aotte - call me

Re: Gmc 351e big block v6
 

I wish I could find one of these near SWMO.

Re: Gmc 351e big block v6
 

No y pipe, only manifold;
Air cleaner came w/engine, not sure origional.
No transmission.

I have lots going on currently, so may may be slow to respond, thanks for understanding.