Gas neck in tailight housing
 

Has anybody got any info or pics of this mod? I have a 67 and I don't have a side marker light to put it behind. Any help is appreciated.Thanks......JB

------------------
1967 ShortBed
Fleetside 3/5 Drop
350/700R4
Buckets, Console, Tilt
15 x 8 Corvette Style
Rallys

I have not done this yet, but I should be looking into this within the next 3 weeks.

There is a photo of one from someones Blazer on my web page.

I will write up a article on the progress of mine when I do it.



------------------
John Fabris
john.fabris@autodesk.com
1967 C10 SWB FleetSide Web Page
1971 K5 Blazer 2WD (basket case, but give me two year or so.)

I have thought of that also. What I planned on doing is buying a gas door from a current production Honda Odessey. The main thing for my idea is a system that allows point of rotation below the opening in the bed side. Then weld a support inside the bedside that would allow the gas door to be welded to. Then fab the gas door end to attach to the taillight housing...
...At least it sound simple.

Try this out... http://www.classicheartbeat.com/mark...t_gas_door.htm

[This message has been edited by RainDog (edited April 20, 2002).]

Anybody else?????

------------------
1967 ShortBed
Fleetside 3/5 Drop
350/700R4
Buckets, Console, Tilt
15 x 8 Corvette Style
Rallys

Very cool modification!

------------------
1970 c10 LWB
350/350

Someone from the board did it and posted some pics of it. Don't remember their name but it was an orange colored long fleet. Looked like whoever did the behind the tail light filler mod on that truck did a pretty good job.

Wish we had the search.
Spell check would be nice too.

[This message has been edited by ebfabman (edited May 21, 2002).]