![]() |
Core support rebuild
1 Attachment(s)
My core support is rotted away from under the battery, can you guys tell me if they're symmetrical in the bottom corners before I start trying to fabricate a new piece please? Thanks as always
|
Re: Core support rebuild
There are patch panels available. See the thread below.
https://67-72chevytrucks.com/vboard/...rt+patch+panel |
Re: Core support rebuild
Quote:
|
Re: Core support rebuild
They are symmetrical.
Good luck, Rg |
Re: Core support rebuild
Quote:
|
Re: Core support rebuild
I replaced the support on my 68 fitment was spot on . Wasn’t near as bad as yours if you want to retain the original you could use a repro as patch panels .
|
Re: Core support rebuild
Quote:
|
Re: Core support rebuild
1 Attachment(s)
Quote:
|
Re: Core support rebuild
Quote:
|
Re: Core support rebuild
Like some others, I made mine from some leftover sheet metal I had laying around. This is an area not easily seen, so wasn't too worried about cosmetic appearance, and money saved and I could spend elsewhere on the truck.
|
Re: Core support rebuild
Quote:
|
Re: Core support rebuild
You may want to consider the patch panel. It completes the difficult bends at the bottom. The rest may be flatter and easier to deal with. However, with out knowing your skills and resources my recommendation may be just that, a recommendation that is based on my skills.
Best of luck. |
Re: Core support rebuild
Maybe figure out the dimensions of the patches needed. Maybe someone on here could cut them to size from a support offered on the parts page. Or someone with a semi usable one they have laying around. If not able to get all of them, you might get enough to make it easier to fabricate. Just an idle thought floating through my meager mind.
|
Re: Core support rebuild
Quote:
|
Re: Core support rebuild
Quote:
|
All times are GMT -4. The time now is 09:44 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com