The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Blazer and Suburban Stuff (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=199)
-   -   MT 1972 Blazer cst parts truck (https://67-72chevytrucks.com/vboard/showthread.php?t=723143)

Coatingguy 11-23-2016 03:16 PM

1972 Blazer cst parts truck
 
5 Attachment(s)
Hello everyone, I have whats left of a 1972 Blazer cst. This truck has been sitting since about 1991. it is being sold as a parts only truck. It has no title or vin plate, both are long gone.
Ill start with the body. The firewall, windshield frame areas are all good and basically solid. The front drivers floor has a little rust but not bad. The kick panels are solid, the passenger side floor is not rusted through. The rear cargo floor is mint other than a little rust bubbling at the very rear where the carpet strip covered. The drivers side quarter is savable, it does have rust and is dented toward the gas cap area but I've saved a lot worse. The drivers door and fender are junk, as is the hood. The passenger fender isn't too bad at all, definitely usable with a little work. The passenger door has a small dent above the door panel area, and below the outer lower body line is dented and rusted but there again, usable. The majority of the passenger quarter is junk, though behind the wheel opening and around the taillight area, its all straight and clean. The original AC dash is intact and the radio hole has not been cut out.
The frame looks nice, the only issue I see is where the rear bumper mounts to the frame horns, needs to be worked around a little, nothing major.
The steering is all intact, other than the column. The brakes are all intact and the fronts work. The rear end is a 12 bolt but has no center section, axle shafts, or brakes. Also the top is off of a 1973, its in good shape. If someone wants it they can have it. Tailgate isn't worth fixing.
If i can answer any question ill do so to the best of my knowledge. I want to sell this as a whole, maybe someone out there can use the rest of this thing for something. Thanks. $600
Im new to this website and am not the greatest with computers either. Ill do my best. I have lots more pictures also.

Coatingguy 11-23-2016 03:20 PM

Re: 1972 Blazer cst parts truck
 
5 Attachment(s)
A few more pictures

Coatingguy 11-23-2016 03:23 PM

Re: 1972 Blazer cst parts truck
 
5 Attachment(s)
more pictures

Coatingguy 11-23-2016 03:29 PM

Re: 1972 Blazer cst parts truck
 
2 Attachment(s)
pictures

rayray767 11-23-2016 04:16 PM

Re: 1972 Blazer cst parts truck
 
I'll take it as a whole ... Let me get some shipping quotes together .. Pm me your phone so we can talk... I'll need your zip code for starters

Coatingguy 11-23-2016 06:19 PM

Re: 1972 Blazer cst parts truck
 
Ray ray,
I will do that.
thanks

raggedjim 11-23-2016 06:28 PM

Re: 1972 Blazer cst parts truck
 
Good call Rayray, the windshield frame looks to be solid and I think it will make a great starting point.

Good luck, Rg

too much stuff 11-23-2016 08:15 PM

Re: 1972 Blazer cst parts truck
 
Is the bolt in hump for sale?

4x41971SWB 11-23-2016 11:08 PM

Re: 1972 Blazer cst parts truck
 
If by any chance the deal falls through I will take it and pick it up in person.
Than7

Rex10 11-23-2016 11:59 PM

Re: 1972 Blazer cst parts truck
 
What month was the Blazer built?

Coatingguy 11-24-2016 10:52 AM

Re: 1972 Blazer cst parts truck
 
4x41971swb,
I will keep you informed. Thanks for your interest.

Rex10,
Im not honestly sure. How does one figure that out?
Thanks

Coatingguy 11-24-2016 10:54 AM

Re: 1972 Blazer cst parts truck
 
Too much stuff,
Well the hump pictured is kind of included with truck since its pictured. Im sure I have others lying around. Do you need a tall or short?

too much stuff 11-24-2016 11:07 AM

Re: 1972 Blazer cst parts truck
 
Quote:

Originally Posted by Coatingguy (Post 7776752)
Too much stuff,
Well the hump pictured is kind of included with truck since its pictured. Im sure I have others lying around. Do you need a tall or short?

Could use a tall one with the trans case hole as pictured. Thanks.

Rex10 11-24-2016 06:32 PM

Re: 1972 Blazer cst parts truck
 
The blue lable on the inside of the drivers side door jam.

Coatingguy 11-24-2016 08:27 PM

Re: 1972 Blazer cst parts truck
 
Rex10,
if you are refering to the VIN tag on the drives inside door jam, it is no longer there.
thanks

Coatingguy 11-25-2016 03:41 PM

Re: 1972 Blazer cst parts truck
 
5 Attachment(s)
A few more pictures of interest.

Coatingguy 11-25-2016 03:44 PM

Re: 1972 Blazer cst parts truck
 
5 Attachment(s)
pictures

k5blazin 11-25-2016 08:41 PM

Re: 1972 Blazer cst parts truck
 
Put me in line please. I will take it if the others pass. Thanks

k5blazin 09-25-2017 10:48 PM

Re: 1972 Blazer cst parts truck
 
Anyone heard from George or know how to contact him? I purchased this several months ago and have lost contact. Super nice guy hope all is well. Thanks

briank 09-26-2017 12:06 AM

Re: 1972 Blazer cst parts truck
 
Wow....you're very patient!

1rippen6 09-26-2017 07:38 AM

Re: 1972 Blazer cst parts truck
 
http://67-72chevytrucks.com/vboard/s...d.php?t=737205

too much stuff 09-26-2017 08:25 AM

Re: 1972 Blazer cst parts truck
 
Quote:

Originally Posted by k5blazin (Post 8048073)
Anyone heard from George or know how to contact him? I purchased this several months ago and have lost contact. Super nice guy hope all is well. Thanks

Good luck dealing with this guy. Hope you didn't give him any money.

k5blazin 09-26-2017 03:01 PM

Re: 1972 Blazer cst parts truck
 
Quote:

Originally Posted by too much stuff (Post 8048246)
Good luck dealing with this guy. Hope you didn't give him any money.

Ya I did! Think he may have got me! 600$

k5blazin 09-27-2017 11:03 PM

Re: 1972 Blazer cst parts truck
 
Ok it was confirmed today this guys bad news. He has my money and it's was sold to another member the same week. Won't respond to any contact. Sad to say there are people like this on this forum. Just wanting to let other members know to stay clear. Maybe the moderators can block him? Hind sight I should have responded to this thread stating that I made payment so other parties could have seen the scam. Thanks

4x41971SWB 09-28-2017 12:07 AM

Re: 1972 Blazer cst parts truck
 
Look at post #9 of this thread. I said I would take it if the person before me did not.
I was the sent a PM from George Moss with his number the next day on the 24th which was thanksgiving day an the day I made the deal with George and purchased it. I sent him money the following Monday. He told me he was going to be out of town for the next couple of months. If I could pick it up then. Well to make a long story short and belive me there is a lot to tell. I played hell trying to get a hold of him for several months but I was relentless in my pursuit to get a hold of him. I reached out to several other board members who helped me and have met three members who have been screwed by George for several hundrrd dollars.
If it wasn't for the help of another member who is from the same town I would have been screwed by George as well which was his full intent.
Through my searching this George Moss has been on this forum under at least one other name if not more. So if the board does not do anything about it just beware of new members from that area especially selling K5 parts.
Again I have alot more to say but this is getting long enough and everything can be confirmed by several other board members who have been on here for several years.


All times are GMT -4. The time now is 05:16 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com