The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Whose on Steelies? Post 'em up! (https://67-72chevytrucks.com/vboard/showthread.php?t=321961)

theyammieguy 01-13-2009 08:50 PM

Re: Whose on Steelies? Post 'em up!
 
here's my junk

http://i113.photobucket.com/albums/n...Picture009.jpg

Ont67shortbox 01-13-2009 09:23 PM

Re: Whose on Steelies? Post 'em up!
 
It is tubbed,but it is also coil spring/trailing arm,the rear is stock length,wheels are 15x12 with 8 inch backspacing

special-K 01-13-2009 10:01 PM

Re: Whose on Steelies? Post 'em up!
 
Quote:

Originally Posted by brendonak (Post 3084193)
Can you get like a 255/55 or 265/50 tire for the 16.5?

No,those are newfangled sizes for light vehicles.16.5s are for truck tires.

CG 01-13-2009 10:33 PM

Re: Whose on Steelies? Post 'em up!
 
3 Attachment(s)
Here is my 71 K20 when I first got it with the black wheels. Then I changed them over to a little bit narrower white wheel.

And here is my 71 K10 with white wheels. I love the look of these wheels on these trucks.

nds1968 01-13-2009 10:37 PM

Re: Whose on Steelies? Post 'em up!
 
4 Attachment(s)
I am going to run one of these combos with 15x6's in front and 15x8's in the rear.

thirdstreettito 01-13-2009 10:57 PM

Re: Whose on Steelies? Post 'em up!
 
CG, your K20 is hot! What are the specs?

CG 01-13-2009 11:00 PM

Re: Whose on Steelies? Post 'em up!
 
Quote:

Originally Posted by thirdstreettito (Post 3085000)
CG, your K20 is hot! What are the specs?

Ummm...its stock, lol. Tires are 33 x 12.5 16.5. No lift, 350 4sp. Nothing special, but I like it. Im the second owner.

thirdstreettito 01-13-2009 11:44 PM

Re: Whose on Steelies? Post 'em up!
 
Quote:

Originally Posted by CG (Post 3085016)
Ummm...its stock, lol. Tires are 33 x 12.5 16.5. No lift, 350 4sp. Nothing special, but I like it. Im the second owner.

I couldn't tell, Special-K posted some with 15x8's and they look like 15x11's because of the WIDE tires. I love the looks of it.

CG 01-14-2009 12:10 AM

Re: Whose on Steelies? Post 'em up!
 
Im not positive on the width of the wheels. I think they are a little over 8 inches...Im getting old and forgetful...lol.

Btw...I hope Isabella comes over here before you change your latest av...that thing cracks me up. I think she will like it.

pcorriveau951 01-14-2009 12:13 AM

Re: Whose on Steelies? Post 'em up!
 
CG, very nice truck!!! can you measure how far from the ground to the wheel opening is on your truck in the front? it would be much appreciated

Thank you, Phil

phipp13 01-14-2009 12:54 AM

Re: Whose on Steelies? Post 'em up!
 
Here's a pic of a steelie, the other ones kinda busy :)

http://i364.photobucket.com/albums/o...3/burnout2.jpg

CG 01-14-2009 01:10 AM

Re: Whose on Steelies? Post 'em up!
 
Quote:

Originally Posted by pcorriveau951 (Post 3085200)
CG, very nice truck!!! can you measure how far from the ground to the wheel opening is on your truck in the front? it would be much appreciated

Thank you, Phil

Green truck or black truck? Green is here, black one is stored in a barn at my inlaws.

pcorriveau951 01-14-2009 01:32 AM

Re: Whose on Steelies? Post 'em up!
 
the green truck

CG 01-14-2009 01:50 AM

Re: Whose on Steelies? Post 'em up!
 
37.5 inches off a cement floor.

pcorriveau951 01-14-2009 03:32 AM

Re: Whose on Steelies? Post 'em up!
 
CG, Thank you very much

special-K 01-14-2009 06:59 AM

Re: Whose on Steelies? Post 'em up!
 
CG`s green truck started with black 9.75s like the white GMC and red Chevy I showed.All have 12.50/33 x 16.5s on 9.75 x 16.5 wheels.His white wheels are 8.25 x 16.5.

1985-GMC 01-29-2010 04:38 PM

Re: Whose on Steelies? Post 'em up!
 
2 Attachment(s)
Here's mine 16.5 Kelsey hays, I have five of them. I think their the same as special-k's but their closer to 11" wide.

NC67Chev 01-29-2010 07:15 PM

Re: Whose on Steelies? Post 'em up!
 
To 67 C-30 (or anyone else that can advise),

I was planning on posting a question about using original steel wheels after I complete my power disc brake conversion and 2.5/4 drop. It seems like the people on this post likely hold the answer to my question, so I'll just post here. I've found some 15" 6 lug disc wheels that will enable me to use my original hubcaps. However, I've read a couple of posts that seem to say that there is an issue with control arm clearance with 15" wheels after a 2.5" spindle drop. Is this the case? If so, how did you get around it?

Thanks!

vectorit 01-29-2010 07:54 PM

Re: Whose on Steelies? Post 'em up!
 
1 Attachment(s)
Here's mine, just some old 16.5's with BFG 33x12.50 rubber.
They aren't the originals to the burb, but they have been on there for close to 30 years. They are date stamped 1969.
I still have my original 16.5 splits though.
Eventually going to some similar steel wheels, but in a 16" or 17" diameter after I get other things taken care of.

highperf4x4 01-29-2010 08:53 PM

Re: Whose on Steelies? Post 'em up!
 
Mine are Cragar Nomad 2's
Tires are Cooper Cobra GT's
Suspension is stock
Front 15x8 with 255/60/15
Rear 15x10 with 295/50/15

I like the old school stuff but not necessarily stock. Just what I had in high school! :lol:

http://i4.photobucket.com/albums/y14...0GMC/tint2.jpg

http://i4.photobucket.com/albums/y14...cleanwheel.jpg

SCOTI 01-29-2010 09:41 PM

Re: Whose on Steelies? Post 'em up!
 
Quote:

Originally Posted by NC67Chev (Post 3766825)
To 67 C-30 (or anyone else that can advise),

I was planning on posting a question about using original steel wheels after I complete my power disc brake conversion and 2.5/4 drop. It seems like the people on this post likely hold the answer to my question, so I'll just post here. I've found some 15" 6 lug disc wheels that will enable me to use my original hubcaps. However, I've read a couple of posts that seem to say that there is an issue with control arm clearance with 15" wheels after a 2.5" spindle drop. Is this the case? If so, how did you get around it?

Thanks!

To answer your question about 'interference', there is some but it varies w/the back-spacing. Narrower wheels require less trimming of the lip around the BJ edge of the lower a-arm; wider wheels w/more back-space might require more.

Hop over to the suspension forum & post up your wheel size & back-space. See if someone might have that combo to give you a more specific answer.

2bits 01-29-2010 11:53 PM

Re: Whose on Steelies? Post 'em up!
 
Quote:

Originally Posted by highperf4x4 (Post 3767022)
Mine are Cragar Nomad 2's
Tires are Cooper Cobra GT's
Suspension is stock
Front 15x8 with 255/60/15
Rear 15x10 with 295/50/15

I like the old school stuff but not necessarily stock. Just what I had in high school! :lol:

http://i4.photobucket.com/albums/y14...0GMC/tint2.jpg

Looks awesome to me! I wouldn't change a thing. Not paint it either, nothing. It's perfect!

highperf4x4 01-30-2010 12:08 AM

Re: Whose on Steelies? Post 'em up!
 
:lol: Thanks. I already primed the hood though. I was planning to repaint it factory colors. The interior is already shaping up. Just need to build my custom oak center console. I guess I could sand the hood back down and let it go again! :D


http://i4.photobucket.com/albums/y14...GMC/seats3.jpg

2bits 01-30-2010 12:30 AM

Re: Whose on Steelies? Post 'em up!
 
Looks good either way, you got the style I like, just like in high school.... Love it... My old steelies:


http://www.grossepointegothic.com/forums/PICT1874.JPG

highperf4x4 01-30-2010 12:41 AM

Re: Whose on Steelies? Post 'em up!
 
That's sweet. Got more pics of that truck?


All times are GMT -4. The time now is 05:21 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com