differences in calipers
Does anyone know if there are any differences in a 72 c10 front caliper and a 84 K10 front caliper other than maybe the brake fitting?
|
Re: differences in calipers
1972 c-10 front https://www.rockauto.com/en/moreinfo...410073&jsn=470
1984 k10 https://www.rockauto.com/en/moreinfo...299708&jsn=609 the banjo bolt hole will be american / 72 and then metric for 84 the body is the same basic shape but you might need to grind a bit for a casting nub to clear hear and there . been to long since i played with that stuff to recall . 2 links tho have a few pics to show you . |
Re: differences in calipers
sweetk30, thanks, I will try my 72 c10 calipers which because of the 59 straight axle have extra long rubber lines now. Just was hoping not to have to buy the 84 since the 72's are new rebuilt stuff. I have completed the gear change in the 84 GM 10 bolt to match the rear on my 59 GMC 3.07 to 3.73.
Yea, I looked at rockauto to see if they had different part numbers. |
Re: differences in calipers
To my question about 1972 c10 calipers working on a 1984 K10 front axle.
Answer is NO. |
All times are GMT -4. The time now is 03:13 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com