Re: 1960-1972 Lowering Block U bolts
 

Thanks! Definitely want the blocks and bolts. I meant an entire kit for bags in the rear; bags, hats, and the fittings?

Re: 1960-1972 Lowering Block U bolts
 

Hey Way2Lo2@aol.com I just sent you 69.95 for 1.5" lowering blocks and bolts for my 68 c10. If you don't have 1.5 the 1" will work.
Thanks Scott

Re: 1960-1972 Lowering Block U bolts
 

Re: 1960-1972 Lowering Block U bolts
 

Ok 1" will work.

Re: 1960-1972 Lowering Block U bolts
 

$$ sent thru PayPal

Re: 1960-1972 Lowering Block U bolts
 

I received my blocks today. They look great thanks!

Re: 1960-1972 Lowering Block U bolts
 

I has a 67 SWB. any issues running 2" blocks on factory 15" drum wheels? i saw on CPPs website they didnt recommend it, but it didnt say why.

Re: 1960-1972 Lowering Block U bolts
 

They are concerned about scrub line issues but I believe you'll be fine as long as you cut off the excess U bolt threads that protrude through the nut

Re: 1960-1972 Lowering Block U bolts
 

Can I get a price for 2 in blocks and u joints to 91303? Do you have payment options other than paypal?

Thanks

Re: 1960-1972 Lowering Block U bolts
 

69.95 shipped, you can call us with a credit card or send a check.

Re: 1960-1972 Lowering Block U bolts
 

Can I get a price on a pair of 2" blocks?

Re: 1960-1972 Lowering Block U bolts
 

$45.00 for a pair of blocks shipped
69.95 for a block and u bolt kit.

Re: 1960-1972 Lowering Block U bolts
 

I'll be in touch

Re: 1960-1972 Lowering Block U bolts
 

Paypal sent for 2" blocks/ubolt hardware kit

Re: 1960-1972 Lowering Block U bolts
 

I've found lowering block kits with u-bolts and hardware cheaper online bit I would rather support fellow forum members... and I've found they are a much more knowledgable resource for information and how-to.

Having said that, I would like a 2" blocks and u-bolt kit. I think that will work well with 4" drop springs without having to relocate spring mounts or c-notching the frame... any thoughts?

Still $69.95 to way2lo2@aol.com?

Re: 1960-1972 Lowering Block U bolts
 

I'm pretty sure with any load in the bed or a good pot hole, you're going to be bumping the axle tubes into the frame unless you ad a c notch. But I do still have the blocks at 69.95 and the email is correct.
Thanks

Re: 1960-1972 Lowering Block U bolts
 

i also would be interested in a set of 2 inch blocks with bolts.
pretty pretty please with a big ole strawberry (or whatever floats your boat) on top! :)

Re: 1960-1972 Lowering Block U bolts
 

Re: 1960-1972 Lowering Block U bolts
 

Any 1.5" blocks by chance? Thanks

Re: 1960-1972 Lowering Block U bolts
 

Interested in 2" kit paypal done shortly

Re: 1960-1972 Lowering Block U bolts
 

How much for u bolts? I made my own blocks outta some 2x2 square stock and truck shop here don't make them

Re: 1960-1972 Lowering Block U bolts
 

Re: 1960-1972 Lowering Block U bolts
 

Hi

Do you sell pinion shims also ? I have 4 inch springs and thinking about adding 2 inch blocks. Do you sell shims to correct the pinion angle also ?

Thanks
Alleb

Re: 1960-1972 Lowering Block U bolts
 

Hello. I have a 67 c10 1/2 ton fleetside with coil rear suspension and drum brakes. It has the "helper leaf".

It sits high in the back. I'm thinking that these trucks are 2 inches higher in the back?

I see everyone asking for the 69.95, shipped :) 2" blocks and bolts. So if I get this, can I leave the front alone and
end up with a level ride? Should I leave the helper leaf alone?


Thanx

Re: 1960-1972 Lowering Block U bolts
 

Re: 1960-1972 Lowering Block U bolts
 

any 1.5 kits? or what would you recommend for a bagged rear with a mild cnotch?

Re: 1960-1972 Lowering Block U bolts
 

Re: 1960-1972 Lowering Block U bolts
 

ok 69.95 shipped??

Re: 1960-1972 Lowering Block U bolts
 

yes sir Our paypal is Way2Lo2@aol.com
thanks

Re: 1960-1972 Lowering Block U bolts
 

payment sent.
thanks,
Armando

Re: 1960-1972 Lowering Block U bolts
 

Boris , I have a 68 lwb I dropped the back using 2in springs I got for free from a friend . It still sits with a small rake I want to cut one coil off the front and put 2in blocks out back for a 2/4 total drop . I have 15in wheels with 31-10.5 tires out back will I have scrub issues or do you have customers that do this ? Let me know how I order and how much . Thanks !

Re: 1960-1972 Lowering Block U bolts
 

Good morning, interested in 2 inch lowering kit, blocks and u bolts for a 1960. Is this kit currently available?

Re: 1960-1972 Lowering Block U bolts
 

would a 3" block scrub with the bolt cut off on a 15" with a 30" tire ???

Re: 1960-1972 Lowering Block U bolts
 

Interested in a 2" complete set shipped to 98467. Thank you!

Re: 1960-1972 Lowering Block U bolts
 

$ sent via PayPal for a pair of 2" blocks/u-bolts to 37914.

Thanks! :cool:

Re: 1960-1972 Lowering Block U bolts
 

on the way!

Re: 1960-1972 Lowering Block U bolts
 

do you still offer the U bolts for 2 inch drop? e-mail me at bbsports@msn.com

Cal

Re: 1960-1972 Lowering Block U bolts
 

I found this thread and saw it doesn't get a lot of recent traffic; don't let that fool you. I called way2low2 to see if he still offered these bolts, he does, and he did. I paid him and the bolts beat the some other parts I'd bought elsewhere by a day or two.

Many thanks to the OP!

Re: 1960-1972 Lowering Block U bolts
 

Could you tell me how much for 2" block kit shipped to 32548. thanks

Re: 1960-1972 Lowering Block U bolts
 

69.95 shipped