Re: 1960-1972 Lowering Block U bolts
 

Had the fella at work make me a set of 1" blocks, PM me about bolts to 94928?

Re: 1960-1972 Lowering Block U bolts
 

PM sent

Re: 1960-1972 Lowering Block U bolts
 

Boris -- I'd like to get a set of 2" blocks and Ubolts please. Do you offer pinion shims? If so, add a set of 4 deg to my order if you could sir.

Just let me know what I owe you, can pay via Paypal upon receipt of the total.

Thanks..

Re: 1960-1972 Lowering Block U bolts
 

Re: 1960-1972 Lowering Block U bolts
 

Got my blocks and bolts, great quality Thanks!

Re: 1960-1972 Lowering Block U bolts
 

Can you get em out pretty quickly? I'm getting ready for the HRPT coming up June 5~ish I'll be leaving for Charlotte on Thursday but I need a little time to put them in, etc. Shipping to TN. Can you do it barring any unforeseen USPS stuff we can't control?

Re: 1960-1972 Lowering Block U bolts
 

Boris -- I went ahead and sent the money, thinking a little more about it I trust you man. Just do the best you can for me I understand. I'll PM my shipping address.

Re: 1960-1972 Lowering Block U bolts
 

Do you make lowering blocks for 84 c10. All I'm findin is for 60-72 trucks
Posted via Mobile Device

Re: 1960-1972 Lowering Block U bolts
 

I need a set of 2 inch drop blocks and u bolts. Shipped to 35960. Can send paypal today. Thanks.

Re: 1960-1972 Lowering Block U bolts
 

you can only use lowering blocks on a 73-87 if you flip the axle under the rear end, if you install lowering blocks on the stock rear end/leaf arrangement, it will lift it not lower it.

Re: 1960-1972 Lowering Block U bolts
 

$69.95 paypal is way2Lo2@aol.com

Re: 1960-1972 Lowering Block U bolts
 

Re: 1960-1972 Lowering Block U bolts
 

sent a pm looking for some fittings. Let me know if you got it or need me to resend. Thanks!

Re: 1960-1972 Lowering Block U bolts
 

got the email, still trying to figure out a way to do it where you're not spending hundreds on fittings

Re: 1960-1972 Lowering Block U bolts
 

Way2lo2,
Are your longest bolts long enough for 2.5 in. blocks? I made a set at work and just need some u bolts. Oh and I also have 1/4 in. plates on both sides one as a spacer and the other for my trac bar mount...
Thanks in advance for your help.

Re: 1960-1972 Lowering Block U bolts
 

Yes my bolts will work with 2.5 blocks
Posted via Mobile Device

Re: 1960-1972 Lowering Block U bolts
 

pm sent

Re: 1960-1972 Lowering Block U bolts
 

Can i get a set of 2 inch blocks and u bolts?

Re: 1960-1972 Lowering Block U bolts
 

PM sent

Re: 1960-1972 Lowering Block U bolts
 

If you got any left i like to get in on a set for some 2 in block i already got the blocks.

Re: 1960-1972 Lowering Block U bolts
 

Do you need bolts or blocks ?
Posted via Mobile Device

Re: 1960-1972 Lowering Block U bolts
 

I need bolts to fit 2 inch blocks i have the blocks

Re: 1960-1972 Lowering Block U bolts
 

PayPal sent for 2" block and bolt set.
Posted via Mobile Device

Re: 1960-1972 Lowering Block U bolts
 

never got the papal

Re: 1960-1972 Lowering Block U bolts
 

How much for 2" blocks and bolts sent to 80238?

Re: 1960-1972 Lowering Block U bolts
 

Got mine today, they look great and were here in just a few days. Thanks.
Posted via Mobile Device

Re: 1960-1972 Lowering Block U bolts
 

I'll be book marking this page for future use!

Re: 1960-1972 Lowering Block U bolts
 

Gotta see if my special ordered u-bolts from my employer are gonna stay special ordered, or if they're gonna actually come in. Most likely be getting mine from you, find out in a couple days.

Re: 1960-1972 Lowering Block U bolts
 

no problem, ours are always in stock and made right here in Euclid, Ohio USA

Re: 1960-1972 Lowering Block U bolts
 

I need to get a set of bolts sent to 76308

Re: 1960-1972 Lowering Block U bolts
 

Re: 1960-1972 Lowering Block U bolts
 

Can I get a price for a set of 2" blocks with U-bolts shipped to 46755. Thanks, Chad

Re: 1960-1972 Lowering Block U bolts
 

I/M sent

Re: 1960-1972 Lowering Block U bolts
 

Got my set and I am very pleased with the quality and fast shipping! Thanks

Re: 1960-1972 Lowering Block U bolts
 

Can you give me a price for a set of u-bolts with 1" blocks shipped to 39532? Thanks.

Re: 1960-1972 Lowering Block U bolts
 

Just installed our 2 inch blocks with the new u bolts. nice stuff. thanks Boris

Re: 1960-1972 Lowering Block U bolts
 

Payment sent for a set of u-bolts.

Re: 1960-1972 Lowering Block U bolts
 

Got my u-bolts yesterday, look great...and they got here quick!

Re: 1960-1972 Lowering Block U bolts
 

I didn't read the whole thread, but can i get a set for 3" blocks shipped to 75208? if you are only doing 2" thats fine, i can cut my blocks down to 2" (may be doing that either way)

Re: 1960-1972 Lowering Block U bolts
 

yes, the bolts will work for 3" blocks $35.00 shipped Paypal Way2Lo2@aol.com
Thanks