I think I’m done?
 

I think I’ve reached the end of my build, not sure what to do but show it off! Check it out. Pretty much frame up. Wire wheeled the frame a painted. Complete AAW rewire, all soldered connections and heat shrink (no crimps on the entire truck) autoloc billet switches for windows and door locks. Autoloc one touch up/down window modules. Autolocs door lock actuators/modules. Everything is on weatherpak quick connect plugs and relays. Dakota digital gauges. I ordered a Snowden seat and 7yards of material and built the door panels, the dash, kick panels, subwoofer box. 300mil of sound deadening materials. 10-speaker audio system, 3 amps running off a dsp connected to a retro sound model two radio. All new glass and rubber. Ridetech 4 link, 4 way air ride managed by accuair ride height sensors. Dual 485 viaair and accuair 5 gal tank mounted where the passenger gas tank used to be. All wires and air lines ran inside the frame rails and loomed up. All new light bulbs. LED headlights. Custom front switch back turn signals. 3.73 posi out back. Beefed up 700r4. Budnik spyder wheels and steering wheel to match. New paint job.

It was a fun time building this truck from the ground up, especially because it was my first vehicle. I’ve had it 15 years and it’s finally where I dreamed of. Since I’ve posted the interior on Facebook, I’ve picked up a few customers for some interior products I designed and built for this truck. I guess now that I’m finished with mine, I’ll be putting my little touch of custom out into the c10 world. Kind of excited to have something to do now that I’m “done” with mine! Lmao I’m sure I’ll end up swapping motors out at some point 🤷🏻*♂️

Re: I think I’m done?
 

Frame

Re: I think I’m done?
 

More

Re: I think I’m done?
 

Height sensors rivnut to crossmember.

Re: I think I’m done?
 

Tank and compressor mounting

Re: I think I’m done?
 

Some paint

Re: I think I’m done?
 

I put another layer of foam over this so roughly 300mil of sound deadener

Re: I think I’m done?
 

Some wiring

Re: I think I’m done?
 

More

Re: I think I’m done?
 

New power lock/window harness.

Re: I think I’m done?
 

These are the blinkers I used and their wiring schematic that implements the switchback feature. Cool Amazon product for a Harley Davison I think? lol

Re: I think I’m done?
 

Door panels. Shaved the factory switches and added the autoloc switches with the white halo lights.

Re: I think I’m done?
 

More on door panels

Re: I think I’m done?
 

Arm rests and the insert that I sewed some double diamonds to match my Snowden seat. Came out good 👍🏻

Re: I think I’m done?
 

Sub box build. Neodymium magnets to hold the amps beauty panel on. Internal bracing inside the box. Thing is a tank. Fits snug in the space, no holes in the cab at all 🤙🏼

Re: I think I’m done?
 

Sub box finished. French seam down the spine to match the dash.

Re: I think I’m done?
 

GMSS inner fenders, filler panels and slosh tubs core support filler panels to hide all my wiring. Cleaned up the bay nicely. Fenders are built for factory firewall/ac and wam rods.

Re: I think I’m done?
 

Slight shoe change. Budnik spyders 20x10 and 20x8.5. 235/40 and 285/35. 28” tall with roughly 4” sidewall height. Nitto nt555 tires. Thing rides like a dream.

Re: I think I’m done?
 

Beginning stage of my product I’m going to go in to producing. Let me know what y’all think.

Re: I think I’m done?
 

Not sure how many times I pulled these in and out of the truck. Lost count around 10 per side! lol

Re: I think I’m done?
 

Starting the fiberglass

Re: I think I’m done?
 

Last test fit before glass filler

Re: I think I’m done?
 

First layer of glass filler

Re: I think I’m done?
 

Finished with the body work. Ready for glue

Re: I think I’m done?
 

Wrapped and done! Came out clean