The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - Alignment Specs? (https://67-72chevytrucks.com/vboard/showthread.php?t=846607)

kens65fb

08-10-2023 08:43 AM

Alignment Specs?

Can anyone provide front end alignment specs ?

kens65fb

08-10-2023 12:43 PM

Re: Alignment Specs?

I got these specs from another site, do they seem right, any opinions?

Suggested Alignment Specs:

CAMBER minus .5 degrees

CASTER +3.0 to +5.0 degrees

TOE IN 1/16" to 1/8" TOE IN

SCOTI

08-11-2023 11:29 AM

Re: Alignment Specs?

Quote:

Originally Posted by kens65fb (Post 9228730)

I got these specs from another site, do they seem right, any opinions?

Suggested Alignment Specs:

CAMBER minus .5 degrees

CASTER +3.0 to +5.0 degrees

TOE IN 1/16" to 1/8" TOE IN

That's a good target to shoot for & my 'standard'.

I target NEG .5 Camber & tell them to dial in as much Caster as they can w/that Camber set-point as the priority.

All times are GMT -4. The time now is 02:36 AM.