selling off my 61 C-10 SWB fleetside project
 

Well, as is prone to happen i've lost interest in this truck project after pouring too much into it. I have listed the truck for project or parts locally on CL but listing here too. I suck at checking the board each day so please text, call or e-mail and i'll do my best to respond.

I have a 61 C-10 fleetside SWB currently in pieces.

Have cab with floor patch started but not complete (currently registered with tag in Georgia). Both fleetside bedsides plus a spare bedside. New cross sills including rear.

Looking to part out. I am not really in a position to package and ship but will assist where I can.

A few prices i'm firm on are:
**sold** Doors $300 for the pair
**sold** 12bolt GM rearend $1200
**sold** Hood $200
**sold** 350 engine $250
**sold** 700r4 $200
**sold** Frame complete $1600 (with rearend)

Short Fleetside panels $800 for all three
**sold pending pickup** Cab $300
Tailgate $175
Rear bumper in fair shape $100

I can be reached at 678-773-4450 (no calls after rest please) or email
casaba01-at-bellsouth.net

Thanks,
Joe
this is located 30 miles north of Atlanta in Acworth, Georgia

Re: selling off my 61 C-10 SWB fleetside project
 

A few thoughts before I get asked:
Its a small back window cab
doors need patched underneath as most old ones do but pretty solid overall
fenders need the typical patch but are pretty solid as well

I can take specific pics for serious inquiries of course, its all over my garage and basement right now so kinda hard get get random pics of everything

I will update the thread as items are sold of course to follow the proper rules of the forum, feel free to post here and then text to let me know. I don't want to break any rules.

Re: selling off my 61 C-10 SWB fleetside project
 

do you have a decent rubber mat, oem dome light with wiring?

Re: selling off my 61 C-10 SWB fleetside project
 

no mat. i'd have to check on the dome but i don't think so

Re: selling off my 61 C-10 SWB fleetside project
 

no worries, thks for the reply

Re: selling off my 61 C-10 SWB fleetside project
 

A few pics:

Re: selling off my 61 C-10 SWB fleetside project
 

more:

Re: selling off my 61 C-10 SWB fleetside project
 

The doors have rust spots under the bottom and will need to be patched in the usual place. The bed sides have rust where the wood rests in front and behind the tubs but is easily fixable. The tailgate is fine, I also already have the cab corner patches

Just a few thoughts due to questions i've received

Thanks

Re: selling off my 61 C-10 SWB fleetside project
 

are the white bed side angles rust too like the red one.

Re: selling off my 61 C-10 SWB fleetside project
 

yes they are, those are the trouble spots for these sides

Re: selling off my 61 C-10 SWB fleetside project
 

Interested in the white bedsides also. More photos please

Re: selling off my 61 C-10 SWB fleetside project
 

They are a bit difficult to get to at the moment by myself. i tried shooting a little video of them to help. I will get some help to pull them out tomorrow hopefully.

The passenger side stake pocket has been pulled loose and will need fixing, that was the reason I picked up the red one even though it had holes for trim and reverse light (was from a 65 I think)


At the end of the 1st video there is a square piece of rusty steel hanging, the bed was old sheet metal when I got the truck, thats a remnant I didn't remove.

The insides were painted black. I know the video sucks, I won't be winning any oscars for it sadly

Re: selling off my 61 C-10 SWB fleetside project
 

any floor patch panels, or fiberglass fan shroud?

Re: selling off my 61 C-10 SWB fleetside project
 

no, sorry. I do have the cab corner patches to go with the cab.

Re: selling off my 61 C-10 SWB fleetside project
 

What condition are the doors in? Most important....the bottoms of the doors.

Doors are very good on outside and inside but do have rust in the bottoms that will need a patch (typical place and that is the patch readily available). The rust spots are not visible outside.
Posted via Mobile Device

Re: selling off my 61 C-10 SWB fleetside project
 

Door bottom:

Re: selling off my 61 C-10 SWB fleetside project
 

2nd pic... Can show the other door when I get home

Re: selling off my 61 C-10 SWB fleetside project
 

I would be interested in:

Emergency brake assembly

high hump trans cover and firewall section

doors if 1963c-10 loses interest...

Would you be willing to do a "package cost"

Re: selling off my 61 C-10 SWB fleetside project
 

They are your if interested XtremeBowtie

Re: selling off my 61 C-10 SWB fleetside project
 

I'd certainly entertain a package deal. call me to discuss what you want to do

Re: selling off my 61 C-10 SWB fleetside project
 

Doors and cab still available. Rolling chassis and hood sold pending meet

Re: selling off my 61 C-10 SWB fleetside project
 

I also have the tubs for the bed that go with the bedsides and a gas tank, heater diverted parts, box of misc stuff, radiator, etc...

I can part out the cab: (plus shipping if it has to be mailed)
Parking brake setup- $30
Glovebox door and new cardboard glovebox- $30
Ashtray- $8
Instrument cluster- $50
Steering wheel- $100
Heater delete plates on firewall- $15 for both
Trans hump (would probably just sawzall around it and let you separate)- no idea...$35 (or you remove for $20)
Other stuff?

Rear bed sill brand new $130
Three new cross sills. $25 each
Both Cab corner patches. $20

I'm not sure on prices so if out of line feel free to make an offer

Re: selling off my 61 C-10 SWB fleetside project
 

Finally looked and I do have the done light. Not sure how far the wiring goes but you can get it. How's $25 shipped?

Re: selling off my 61 C-10 SWB fleetside project
 

What do you want for the doors and where are you located