The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Running wires down A pillar? (https://67-72chevytrucks.com/vboard/showthread.php?t=766519)

ZEKE68 06-28-2018 09:53 PM

Running wires down A pillar?
 
Anyone have any advise about running wires down the left A pillar from the inner roof to under the dash. I don't see any obvious holes or routes.

ryans69chevy 06-29-2018 12:22 AM

Re: Running wires down A pillar?
 
1 Attachment(s)
Hey ya go... this is the hole behind the side of the dash. You might want to remove instrument cluster for better access or else you will be on your back under the dash.

ryans69chevy 06-29-2018 12:27 AM

Re: Running wires down A pillar?
 
1 Attachment(s)
Here is the top of cab with outer roof skin removed. You can see a quarter sized hole in the metal brace above the A pillar.

Assuming you have cab roof marker lights take them off and you have access to the wire.

bruceman1968 06-29-2018 12:29 AM

Re: Running wires down A pillar?
 
Post by Tx Firefighter several years ago.
Video is still up. Just click on description at the top of the video.

https://67-72chevytrucks.com/vboard/...d.php?t=463029


All times are GMT -4. The time now is 02:37 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com