76 c10 (scottsdale) cluster wiring description/information?
2 Attachment(s)
Hey all
I’m trying to wire up a Dakota digital vid and I’ve hit a bit of wall with the cluster wiring. I don’t know what each wire is and I can’t seem to find a clear description. I’ve taken a couple of photos of the original gauge cluster wiring connector. Does anyone have a description of each number? |
Re: 76 c10 (scottsdale) cluster wiring description/information?
I found some diagrams and got some of the wires worked out. But it says that the brake is both 6 + 13. Do I connect both thee to the Dakota box?
Also where is the tach/ignition? |
Re: 76 c10 (scottsdale) cluster wiring description/information?
Another dumb one. The fuel is listed as 7 + 18 which I presume is because I have dual tanks. Am I right in that only one tank will be displayed now?
|
Re: 76 c10 (scottsdale) cluster wiring description/information?
I worked out that 13 for the brake was looped into 6 so I used that one
some research online suggests I tap into the signal wire on the fuel sender switch |
Re: 76 c10 (scottsdale) cluster wiring description/information?
Do you still have the original cluster? If so, the best way to identify the wires is to trace out the paths on the printed circuit board. I've done that on a couple, and it's not hard.
|
All times are GMT -4. The time now is 08:53 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com