Garage Built
3 Attachment(s)
This is my 67 C-10, I decided last year that I wanted to take on a project truck.
What was I thinking? I bought this truck last July. It has a 454 with a TH350 and plants the American dreams through a set of 4:11 Gears.I had Big Block goggles on and a little knowledge of C-10s. so I didn't know what to look for all I saw a 454 and a solid frame. When I left with the truck I knew it needed to be rewired and that awful intake manifold paint needed to go. |
Re: Garage Built
5 Attachment(s)
Upon inspection the following morning I knew I was in deep and did not dare tell the wife.
|
Re: Garage Built
Looks like a solid project! What are your plans?
First thing you should do is sell me those hideous old hub caps... ;) |
Re: Garage Built
Quote:
HAHA everybody wanted those I ended up selling them cause I hated to see them just sit there and they did not fall into my plans |
Re: Garage Built
5 Attachment(s)
So I did what any car nut would do start tearing down that’s when I found the cabs shotty patches. After debating with how far into this I was willing to go we decided to pull the engine to see what condition it was in. That's when it just started snowballing.
|
Re: Garage Built
5 Attachment(s)
After that it was a mandatory that the trucks suspension was to be rebuilt with all new parts and a disc brake conversion to stop that truck with the big block. I went ahead and ordered the CPP no guessing kit
Im pretty sure those upper ball joints were from 1967 :banghead: |
Re: Garage Built
4 Attachment(s)
Installed the front brake conversion and realized my OEM rims are not large enough to clear the caliper….
So there it sat for the weekend. ( ill let yall in on a lesson I learned the hard way PAINT your spindles from CPP they are bare cast and I didn’t im still annoyed at myself for that one ) |
Re: Garage Built
3 Attachment(s)
Then it sat dormant for a good 5 months
I had installed the Front suspension and disc conversion and the drop springs front and rear My family added a little one |
Re: Garage Built
4 Attachment(s)
One weekend I decided well… lets just take this thing down to a frame off restoration status ( Half Ass ) I had just watched Finnegan's garage and said I can pull my cab off that same way its only 4 bolts
Then it sat for a couple more months |
Re: Garage Built
5 Attachment(s)
A month ago we have moved into a much comfortable shop and its back on track we took this frame down to bare metal with a wire wheel cause well lets face it these trucks are built on budgets
|
Re: Garage Built
5 Attachment(s)
So now we have prepped the metal and cleaned all surfaces its time to lay some paint down
|
Re: Garage Built
4 Attachment(s)
When I started this build I knew that big rims just were not for me or what the build is supposed to be so I had to have 15s
found these on the Texas C/10 page They polished up nice for sitting in the field for a while |
Re: Garage Built
3 Attachment(s)
My Ol' Man killed his truck so we are both down for the winter
he ripped the Rear end open like a can opener time for an upgrade:metal: |
Re: Garage Built
5 Attachment(s)
So while the truck has been getting some TLC I have time and space in my garage again. That BBC has been getting my attention after I get off of work as well here a few progress pictures to catch yall up
When I opened this thing I found that it had been freshly rebuilt So after a good clean up and checking tolerances and such it is time to start assembly. You should always tap the threads before you assemble so it goes on smoothly. |
Re: Garage Built
5 Attachment(s)
So... now we are caught up in real time
The frame is painted and waiting for assembly The engine is ready for Assembly This weekends project was to get rid of that awful blue intake manifold stripper and a dremel is what it took to do the job |
Re: Garage Built
3 Attachment(s)
A couple comparison photos
also don't forget to stir your paints |
Re: Garage Built
Good work, keep it up!
|
Re: Garage Built
Looking good so far! How do you like that CPP brake/spindle kit? I've been thinking about ordering the same for my '68.
|
Re: Garage Built
Nice truck to start with. It looks really rust free and that bed is so nice. I like watching Finnegan's garage too. I'd really like to have his budget. :lol:
I really like your Dad's truck too. It's pretty sweet! |
Re: Garage Built
I guess your wife finally caught on that you bought a pickup...:D
Can barely believe that thing had a 454 in it and stock drum brakes... Carry On!!! |
Re: Garage Built
Quote:
Quote:
You and me both wish we had his budget Yeah his truck is sweet its a 34 International Quote:
Some people have a death wish I guess drum brakes not only that the fronts were seized on there the dude was driving it around I still am shocked Quote:
|
All times are GMT -4. The time now is 09:28 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com