The 1947 - Present Chevrolet & GMC Truck Message Board Network - 69 c10 250 flywheel grinding starter housing

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - 69 c10 250 flywheel grinding starter housing (https://67-72chevytrucks.com/vboard/showthread.php?t=768001)

73kay

07-22-2018 03:57 PM

69 c10 250 flywheel grinding starter housing

Hey guys,

I got a 69 c10 that I threw a early 70s 250 in and threw in a spare flywheel from my 76 c10 that had a 250 also. Got a reman starter from
Advance and the flywheel teeth are just nicking the inside of the starter housing. My bell housing is stock to the truck and has the 3x bolt mount for a starter. Any ideas besides swapping starters for the 2 bolt to engine or just using a grinder for some clearance? Thanks for any insight.

73kay

07-22-2018 04:36 PM

Re: 69 c10 250 flywheel grinding starter housing

3 Attachment(s)

pix, the flywheel is just nicking the inside of the starter housing near the teeth on the left side (shiny, compared to the black painted housing.)

Steeveedee

07-22-2018 05:20 PM

Re: 69 c10 250 flywheel grinding starter housing

I've not seen that before. Maybe someone with more experience will chime in. Aren't there two different flywheels?

All times are GMT -4. The time now is 09:21 AM.