The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   67-72 Chevrolet & GMC Pickups Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=115)
-   -   Lime Wife's 67 (https://67-72chevytrucks.com/vboard/showthread.php?t=405176)

Hubscrub 05-30-2010 09:59 AM

Lime Wife's 67
 
1 Attachment(s)
So i decided to start a build thread on the 67, that will be my wife's truck to drive. We bought it and decided to let her build it the way she wanted but i am doing most of the work:lol:

Hubscrub 05-30-2010 10:04 AM

Re: Lime Wife's 67
 
3 Attachment(s)
I took the interior out and started cleaning the floorboards and painted them they were in good shape notice the rockers and bottom of pass. door where replace by the po

Hubscrub 05-30-2010 10:10 AM

Re: Lime Wife's 67
 
4 Attachment(s)
i put the carpet and the seat in and she said i don't like the red interior so i that will be changed lol

Hubscrub 05-30-2010 10:21 AM

Re: Lime Wife's 67
 
4 Attachment(s)
I got the motor to run for about 30 second poorly though and the wireing was a mess. Then i found out that the oil was getting water in it so i decided just to pull the motor, hauled it to my dads and got it out

Hubscrub 05-30-2010 10:24 AM

Re: Lime Wife's 67
 
2 Attachment(s)
so i had a long winter with no real progress

oldblue1968chevy 05-30-2010 10:25 AM

Re: Lime Wife's 67
 
nice man is she keeping that floor shifter?..

what're the plans?

Hubscrub 05-30-2010 10:26 AM

Re: Lime Wife's 67
 
2 Attachment(s)
got some small parts painted, and built a small harness to move the wiper switch over like in later models

Hubscrub 05-30-2010 02:09 PM

Re: Lime Wife's 67
 
Quote:

Originally Posted by oldblue1968chevy (Post 4004600)
nice man is she keeping that floor shifter?..

what're the plans?

no, i plan on getting a lokar shifter but it will still be in the floor lol

Hubscrub 05-30-2010 02:14 PM

Re: Lime Wife's 67
 
3 Attachment(s)
started on the gauges getting them placed and wired up

Hubscrub 05-30-2010 02:24 PM

Re: Lime Wife's 67
 
4 Attachment(s)
got a drivers side window regulator and installed it

Hubscrub 05-30-2010 02:30 PM

Re: Lime Wife's 67
 
4 Attachment(s)
the wife scraped all the purple tint off the back window and i installed new locks and ing. cylinder, painted the vent window

Hubscrub 05-30-2010 02:40 PM

Re: Lime Wife's 67
 
4 Attachment(s)
took apart the heater controls to rebuid them, and started taking off the front sheet medal and installed a door latch control

Hubscrub 05-30-2010 02:46 PM

Re: Lime Wife's 67
 
3 Attachment(s)
got the dog house off the truck started cleaning the frame and firewall, got the firewall primed and installed turn siginal and bright indicators in the gauges

Hubscrub 05-30-2010 04:39 PM

Re: Lime Wife's 67
 
3 Attachment(s)
painted the inner side of the fenders

Hubscrub 05-30-2010 04:44 PM

Re: Lime Wife's 67
 
3 Attachment(s)
got firewall painted and enough of the frame painted to put the motor in, i'll take the suspension off when i have all the weight back on the front end. and got the heater controls back in

Hubscrub 05-30-2010 04:46 PM

Re: Lime Wife's 67
 
1 Attachment(s)
one of the heads was cracked so thats where the water was coming from, so i got another one and got them redone

Hubscrub 05-30-2010 04:48 PM

Re: Lime Wife's 67
 
hope fully i can start hanging sheet metal soon. Have to paint the rad. support etc. and need to finish the engine:chevy:

Reticrich 05-30-2010 05:14 PM

Re: Lime Wife's 67
 
Lookin good bro!! Keep it up

FRENCHBLUE72 05-30-2010 05:22 PM

Re: Lime Wife's 67
 
Looking good keep pluggin away at her..

oldblue1968chevy 05-30-2010 06:10 PM

Re: Lime Wife's 67
 
so its an automatic truck? Your lucky to have it converted to disc already..

I wish it would quit raining so I can do some welding!

Hubscrub 05-30-2010 08:42 PM

Re: Lime Wife's 67
 
Quote:

Originally Posted by oldblue1968chevy (Post 4005129)
so its an automatic truck? Your lucky to have it converted to disc already..

I wish it would quit raining so I can do some welding!

yea, turbo 350 i don't know who did the conversion but i have a few things to check in rearend area some of the work i think i will double check :lol: but the shifter thats in it is just a cheap-o and it sucks i think a lokar will be far superior to that thing the truck was a striaght six and three on the tree factory (nothing wrong with that i like em) but its been a 350/350 combo for as long as i have known the truck and i here ya on the rain there is a chance all next week, i need a garage it suck working on the dirt:( but i'm glad i'm able to work;)

oldblue1968chevy 05-30-2010 08:48 PM

Re: Lime Wife's 67
 
I have a garage, and my truck is sitting outside a garage

but the garage is so full of crap i cant get my truck in it to work LOL

and I dont have a gas tank in it to drive it to my house to work

Hubscrub 05-30-2010 08:56 PM

Re: Lime Wife's 67
 
yea i here ya i go out to my dads where 90% of my stuff is and i have to move something out to get mine in the garage to do something i do all my major work there

oldblue1968chevy 05-30-2010 09:08 PM

Re: Lime Wife's 67
 
haha if it rains i will probably be cleaning out the garage so my truck will fit i mean there is junk EVERYWHERE over there!

Hubscrub 05-30-2010 09:16 PM

Re: Lime Wife's 67
 
:haha::haha:
Quote:

Originally Posted by oldblue1968chevy (Post 4005360)
haha if it rains i will probably be cleaning out the garage so my truck will fit i mean there is junk EVERYWHERE over there!


Hubscrub 06-03-2010 10:01 PM

Re: Lime Wife's 67
 
2 Attachment(s)
well i got the rad. support painted and the hood hinges painted, and had to fix the heater box because i had it on a hook were i painted it and it fell and knocked out a quarter size hole in it:dohh:

oldblue1968chevy 06-03-2010 10:07 PM

Re: Lime Wife's 67
 
nice what did you paint it with>

hey hubscrub, where ya live again? Reason I ask I had some ralllys on craiglist, someone called me from shelbyville I think..thought it may've been you..

Hubscrub 06-03-2010 10:11 PM

Re: Lime Wife's 67
 
Quote:

Originally Posted by oldblue1968chevy (Post 4012777)
nice what did you paint it with>

hey hubscrub, where ya live again? Reason I ask I had some ralllys on craiglist, someone called me from shelbyville I think..thought it may've been you..

Rustoleum, no not me, but i do look at nashville craigslist some:smoke:

oldblue1968chevy 06-03-2010 10:24 PM

Re: Lime Wife's 67
 
lol ok i thought it was that direction a lil...good ol rustoleum,how did you prep it?

Hubscrub 06-03-2010 10:30 PM

Re: Lime Wife's 67
 
it was a new panel so i just scuff it up but on old stuff i sand it and use there brown primer

Hubscrub 06-05-2010 11:42 AM

Re: Lime Wife's 67
 
5 Attachment(s)
well got the new seals in the heater box, and installed the fenders, rad.support the rad. support and pass. fender are after market will have to do some hole enlargeing but fits pretty good, maybe later i think me and the wife will cruise down to athens to the big car show:):)

67chevy1series 06-17-2010 12:12 AM

Re: Lime Wife's 67
 
got any more progess im builden a 67 to i can relate:lol:

Hubscrub 06-17-2010 07:38 PM

Re: Lime Wife's 67
 
just little stuff want to get the hood underside painted and install it but i can't get a chance

murgg 06-17-2010 09:03 PM

Re: Lime Wife's 67
 
whats that gauge bezel made from? or is it a aftermarket piece. iwas going to use a glove box door but i like the looks of that one much better

Hubscrub 06-17-2010 09:16 PM

Re: Lime Wife's 67
 
1 Attachment(s)
it came with the truck i have seen them on classic industries but kinda pricey just plastic
Product Photo Part # Description Price Qty
36750922 1967-72 GM TRUCK 6-HOLE DASH PANEL-BRUSHED ALUMINUM $119.95 ea

67chevy1series 06-19-2010 06:03 AM

Re: Lime Wife's 67
 
dang that sucks when you do then take a lot of pics ill be doin that pretty soon

Camaro_nut2001 06-19-2010 07:45 AM

Re: Lime Wife's 67
 
Quote:

Originally Posted by Hubscrub (Post 4004844)
started on the gauges getting them placed and wired up

Very nice! She should Love those.

Hubscrub 06-19-2010 11:41 PM

Re: Lime Wife's 67
 
3 Attachment(s)
well still didn't get the hood back on :hh: but i did get one small thing done today, started painting the heads on her motor. Well i started painting them a couple weeks ago and i got one painted orange and she told me she wanted her motor a different color so i got it sanded again and such and she got me some paint and...... i also got the headlight adjuster screws put in and the little springs :lol:

Hubscrub 06-19-2010 11:46 PM

Re: Lime Wife's 67
 
Quote:

Originally Posted by Camaro_nut2001 (Post 4038009)
Very nice! She should Love those.

i had to redo them the po had them poorly installed and i went back and did it as best i know how, she does like them though :lol:

oldblue1968chevy 06-19-2010 11:52 PM

Re: Lime Wife's 67
 
^gonna be awesome!! hey hub got any solid cabs over there?

ps what else is gonna be lime green?


All times are GMT -4. The time now is 01:02 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com