15x10 Slot Mags
 

I want to get slot mags for my truck, but the only size I have seen them in is 15x10. Would these be too wide? It is a 1970 C/10. Also, what size tires could you run on these wheels? I know 295/50/15 will work, but what else?

My dad on his 71 4x4 has 33x12.50x16.5 tire size and he still has a lot of room.

Hey neon, fill out your profile so we can figure out where you are. I have 6 15x8's and would love to trade a pair for some 15x10's. Keep searching and good luck.

------------------
"KEEP IT DOWN!"
70 Jimmy 454 2wd
56 GMC Big Window

I have 15X10'a all around on my '69 short/fleet. I run 275/60's in the back, and some skinny yard sale crap in the front..I think they are 250/something or another. Here's a coupl pics of the rear tires, the way they fit the rim, and fill the fenderwell.
http://www.freephoto-i.net/users/longhorn/gmcKiss.jpg
http://www.freephoto-i.net/users/longhorn2/junkyard.jpg

------------------
'69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man
I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it.
Need to pick up the one ton Longhorn with a PONTIAC 350/350soon.
Thanks every one!:)
Check out The Longhorn Webite.
If you need a pic posted, E-mail me at longhornmail@yahoo.com
Andy, in Columbus Ohio

How much would you sell a set of 15x8 s for? Do you have any pics of them? are they 6 lug? Someone e-mailed me today that had a set of 15x10s for sale.

They have some bad ass 15x10's at jegs.com check out some of the cragars. They have some really nice ones. The 15x10s Im getting from them are 59.99 a piece not bad.

longhornmail, do you know how tall your rear tires are? They look pretty good, but I don't want to go too much smaller that the stock tires.

Yp, 26 inches. My speedo actually runs about 2 MPH slow at freeway speeds. (75ish)

------------------
'69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man
I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it.
Need to pick up the one ton Longhorn with a PONTIAC 350/350soon.
Thanks every one!:)
Check out The Longhorn Webite.
If you need a pic posted, E-mail me at longhornmail@yahoo.com
Andy, in Columbus Ohio

Iam the one that has the 15x10 slotted mags on my 4x4 the rear mags fit just right but up in front they do stick out . Is the front end on a 4 wheel brive wider than a 2 wheel drive ?
70 Jimmy i still got them asking 200 for all four .

I beleive the 4X4 is wider up front.

------------------
'69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man
I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it.
Need to pick up the one ton Longhorn with a PONTIAC 350/350soon.
Thanks every one!:)
Check out The Longhorn Webite.
If you need a pic posted, E-mail me at longhornmail@yahoo.com
Andy, in Columbus Ohio

yes the front end is wider

------------------
My Truck pictures

www.xframeimpala.com

68 4x4 short fleetside 327 CH465 edelbrock intake and carb MSD distributor its the "SHAGROLET"
56 big window short stepside 235 dual 1 brls
64ImpalaSS 327
70 C10 LWB fleetside custom/10 350/TH350
IM me on aol SN= SHAGROLET

Has anyone seen 16'' slots?

neon, I have seen 16.5 slots but not 16. Not sure if someone made them or not.

Jose, if you still have the 15x10's, could you send me a pic of the set?

pont1@rvi.net

------------------
67 SWB 4x4 - 396 BB / SM420 4 spd
8" lift / 15x14 Welds & 35X14.5 SSR's
Grants Pass, OR

neon, you looking for 16 inch 5/6 lug, or you looking for 16 inch 8 lug? I highly doubt they were ever made 5/6 lug in 16 inch, these kinda date before the bigger car wheels.
I hope to find some 16 8 lug slots on the cheap one day. Polished up, these things look awsome.
------------------
'69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man
I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it.
Need to pick up the one ton Longhorn with a PONTIAC 350/350soon.
Thanks every one! http://67-72chevytrucks.com/board/ubbhtml/smile.gif
Check out The Longhorn Webite.
If you need a pic posted, E-mail me at longhornmail@yahoo.com
Andy, in Columbus Ohio




[This message has been edited by longhornmail (edited March 17, 2002).]

At this point, I'd like to trade a pair of 15x8 6 lugs for a pair of 10's. If they were nice enough, I'd trade 4 8's for a pair of 10's. "Uhhhh....go fish".

------------------
"KEEP IT DOWN!"
70 Jimmy 454 2wd
56 GMC Big Window

LOL...
While wide rubber is cool, I'll admit it blows when your broke and have bald tires, you'l NEVER find good tires that size used.

------------------
'69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man
I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it.
Need to pick up the one ton Longhorn with a PONTIAC 350/350soon.
Thanks every one!:)
Check out The Longhorn Webite.
If you need a pic posted, E-mail me at longhornmail@yahoo.com
Andy, in Columbus Ohio

Longhorn,
I finally found a set of 16.5 x 10 slotted Mags. I gonna get them polished and the slots painted black, once the draintrain stuff is done. With some mud terrain tires.

That's what I'm talkin bout right there. http://67-72chevytrucks.com/board/ubbhtml/wink.gif Have fun and don't get teh polish all over your face, it kinda burns when it is in your eyes. http://67-72chevytrucks.com/board/ubbhtml/wink.gif

------------------
'69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man
I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it.
Need to pick up the one ton Longhorn with a PONTIAC 350/350soon.
Thanks every one!:)
Check out The Longhorn Webite.
If you need a pic posted, E-mail me at longhornmail@yahoo.com
Andy, in Columbus Ohio