Brake Caliper Mounting. Cpp Brackets Question
 

Is The Distance Supposed To Be Even On Both Sides? I Cant Get The Pads In on One Side Because Theres Not Enough Room. I am Using Cpp Drop Spindles and Brackets With Stock Calipers.. Thanks
Posted via Mobile Device

Re: Brake Caliper Mounting. Cpp Brackets Question
 

Not sure about that one. The CPP kit I just put on don’t look like that one. Is the back of your rotor hitting the spindle? Or is that just the angle of the picture?

Re: Brake Caliper Mounting. Cpp Brackets Question
 

Just The Angle Of The Picture
Posted via Mobile Device

Re: Brake Caliper Mounting. Cpp Brackets Question
 

The Spindles I Got Are For a 87 suburban. I Swapped Front Ends. Just Not Ste If The Calipers Supposed To Be Centered to The Rotor.

I did some Research and My Brackets Are on Backwards
Posted via Mobile Device

Re: Brake Caliper Mounting. Cpp Brackets Question
 

Looks to me like the caliper should be on the oustide of the gold bracket.

Re: Brake Caliper Mounting. Cpp Brackets Question
 

It is...

How the heck will the brackets on backwards fix this? Unless it mounts the bracket on the other side of the spindle mounting points (which it cannot).

And when you saw "stock" calipers, do you mean for the truck this is on, or for the 87 suburban?

Post pictures of what was wrong.

Re: Brake Caliper Mounting. Cpp Brackets Question
 

ikr, this is one of those that has been bugging me, while falling asleep. Hopefully OP will show us the fix.

Re: Brake Caliper Mounting. Cpp Brackets Question
 

OP is back with a new thread and new pictures:
http://67-72chevytrucks.com/vboard/s...d.php?t=764282

Re: Brake Caliper Mounting. Cpp Brackets Question
 

Hey Guys If You Notice The Brackets Have a Bend In Them.. The Instructions i Found on The Internet Said The Bend In Them Should be pointed Outwards. Not Inwards Like i Had Them.. Now That I Flipped The Bracket The Calipers Are Centered to The Rotor.
Posted via Mobile Device