The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   What Radiator? (https://67-72chevytrucks.com/vboard/showthread.php?t=844079)

Bunky 04-25-2023 08:01 PM

What Radiator?
 
I looking for a radiator for my 67 GMC. I read some old post and some referred to the CU396 radiator. But they seem to be out of stock everywhere so I called spectra to see what the deal was and the guy told me they were discontinued..

So now the options to get mine record ($500) or buy a aluminum one.

I also have read that the aluminum ones don't fit in the stock mounts properly..

What is others using for replacements?

HO455 04-25-2023 08:24 PM

Re: What Radiator?
 
I went down the re-core route on my Burban. I had to wait an extra 2 weeks to get a quality 4 row core from Canada but it's been flawless since installed some 40k miles ago.

I tried a Cold Case but, sent it back as it uses 3 row side tanks and our trucks only came with 2 or 4 row tanks. So you have to fabricate new mounts or just let it flop around in the 4 row mounts. It really annoyed me that they advertise it as direct fit when in reality it isn't.

For more information on that little adventure scroll to post 333 in the link.

http://67-72chevytrucks.com/vboard/s...698377&page=14

Steeveedee 04-25-2023 08:48 PM

Re: What Radiator?
 
Must be old news. I bought a Cold Case 2-row aluminum radiator about 5 years ago, and it dropped right into my old 4-row Brass radiator's mounts, top and bottom.

tutone 04-25-2023 09:11 PM

Re: What Radiator?
 
I bought a Champion 4 core for my 71. It's not been a year and I just dropped it off at a local shop for a leak. It will be my last one. It fit ok though.

BROWN 70 04-25-2023 10:47 PM

Re: What Radiator?
 
x2 post 3 put my cold case in 2-3 years ago and it fit nicely. not perfect but good enough. chuck

Yamariv 04-26-2023 12:05 PM

Re: What Radiator?
 
Just just upgraded to a 3 Core from the stock 250ci 2 core radiator. I found an original 3 core in the classifieds and had it pressure tested and cleaned out by a local rad shop, Works great! Might be another option you could check out.

PS, even the radiator shop owner said they don't make them like they used to when I picked it up! He loved seeing the old 3 core

72SB 04-26-2023 12:58 PM

Re: What Radiator?
 
Unfortunately all the "radiator shops" have left my area, most likely all of CA with its rigid "you can't do that" environmental laws.

If I needed a new radiator, I would get a Cold Case. Modern Aluminum and 2 LARGE (read better than more little) rows. You can paint it black if you want to look "original"....

Yamariv 04-26-2023 03:03 PM

Re: What Radiator?
 
Quote:

Originally Posted by 72SB (Post 9199602)
Unfortunately all the "radiator shops" have left my area, most likely all of CA with its rigid "you can't do that" environmental laws.

If I needed a new radiator, I would get a Cold Case. Modern Aluminum and 2 LARGE (read better than more little) rows. You can paint it black if you want to look "original"....

Summit makes a repro 4 Core Radiator that looks like the original. I remember seeing a new one advertised locally about a month ago. He had the link to Summit

52napco 04-26-2023 04:54 PM

Re: What Radiator?
 
I've bought several of the Summit reproduction radiators with no issues

weq92f 04-26-2023 06:21 PM

Re: What Radiator?
 
Quote:

Originally Posted by Yamariv (Post 9199630)
Summit makes a repro 4 Core Radiator that looks like the original. I remember seeing a new one advertised locally about a month ago. He had the link to Summit

I think this is the one...

https://www.summitracing.com/parts/sum-382006

-klb

Yamariv 04-26-2023 11:02 PM

Re: What Radiator?
 
Quote:

Originally Posted by weq92f (Post 9199676)
I think this is the one...

https://www.summitracing.com/parts/sum-382006

-klb

That's the one!

71CHEVYSHORTBED402 04-26-2023 11:18 PM

Re: What Radiator?
 
1k gets a us radiator . They're built very well and fit perfectly. I didn't much care for the summit replacement. Cheap fittings and has the vertical structural straps.

nightrider388 04-27-2023 09:36 AM

Re: What Radiator?
 
Quote:

Originally Posted by 71CHEVYSHORTBED402 (Post 9199749)
1k gets a us radiator . They're built very well and fit perfectly. I didn't much care for the summit replacement. Cheap fittings and has the vertical structural straps.

1k what is that? Please explain for those like me :crazy:

72c20customcamper 04-27-2023 09:44 AM

Re: What Radiator?
 
Quote:

Originally Posted by nightrider388 (Post 9199798)
1k what is that? Please explain for those like me :crazy:

$ 1000 .

I had several cheap import radiators in the past . Two Champions and one I forgot the brand all failed in a couple of years. Went with Dewitts HP and not a problem in the past 5 years . Yes they are twice the price but having to repair or replace every few years isnt appealing to me .

I bought a Cold Case for my 72 at the Syracuse nationals a few years ago because it was a show special as the shroud had a minor dent in it (Not even installed) assume it was a return unit . I have yet to install ot as the original is still working well

72SB 04-27-2023 10:48 AM

Re: What Radiator?
 
"If" I needed a radiator, I would get this one. I have had one in my 67 camaro for 2 years now, no issues. Fit and finish was a direct drop in for that car. I assume the same for the C10 model

https://www.coldcaseradiators.com/pr...case-radiators

leftybass209 04-27-2023 02:47 PM

Re: What Radiator?
 
I replaced a slightly leaky 4 row original, with a Champion 3 row. Fit was close, and it still needed the longer 4 row radiator mounts. Both radiators had equal run times in severe heat on my daily driver, in traffic. (up to 110 last summer)

Both radiators cooled exactly the same. Running a fan w/clutch and shroud.

HO455 04-27-2023 05:08 PM

Re: What Radiator?
 
Quote:

Originally Posted by HO455 (Post 9199478)
I went down the re-core route on my Burban. I had to wait an extra 2 weeks to get a quality 4 row core from Canada but it's been flawless since installed some 40k miles ago.

I tried a Cold Case but, sent it back as it uses 3 row side tanks and our trucks only came with 2 or 4 row tanks. So you have to fabricate new mounts or just let it flop around in the 4 row mounts. It really annoyed me that they advertise it as direct fit when in reality it isn't.

For more information on that little adventure scroll to post 333 in the link.

http://67-72chevytrucks.com/vboard/s...698377&page=14

It was in 2018 when bought and returned the COLDCASE radiator to Jegs. Post 336 details the poor fit. I was not happy that the $400 DIRECT FIT radiator required me to modify the factory mounts. If I had wanted to fabricate mounts I could have bought a roundy round race radiator for under $200. In my world Direct Fit means it requires no modifications to install and operate like the factory part did.

ghackett1 04-29-2023 08:41 AM

Re: What Radiator?
 
Not about a Cold Case, but I had the original (2) core radiator and brought it to be recored, I was able to keep the original Harrison sides and tag and he upgraded me to a 3 core. Cost me $450 and have been using it on a new Blueprint crate engine and it runs 180 all day long with new issues.

RLC 04-29-2023 11:30 AM

Re: What Radiator?
 
Got mine from these folks. https://speedcooling.com
Had one of the Ebay specials and the one from Speed Cooling is much heavier gauge and fit perfect in the original mounts.

D.B 04-29-2023 01:54 PM

Re: What Radiator?
 
5 Attachment(s)
My 72 C20 has a custom radiator made by Wizard Cooling. Fits and works great. No problem in the Texas Summer with AC on full. My big block 511 runs around 180 degrees with the AC on and outside temp over 100 degrees.


Attachment 2268751


Attachment 2268752


Attachment 2268753


Attachment 2268754


Attachment 2268755

D.B 04-29-2023 01:57 PM

Re: What Radiator?
 
3 Attachment(s)
Here is a few more pics of the Wizard Cooling unit.


Attachment 2268756


Attachment 2268757


Attachment 2268758

PbFut 04-30-2023 07:52 PM

Re: What Radiator?
 
Be cautious when inspecting the fit of the aluminum radiators into the 4 core mounts. The rubber liner on the mounts will compress enough the it can allow contact of radiator with the edge of the mount. I found this on my 4 row Champion. The hard edge of the mount will saw a hole over time. Best test, though not 100% perfect, is do a continuity test on the radiator to the radiator support before any lines are connected. If you have an open circuit you have good indication there is no metal to metal contact that could wear a hole over time.

lolcopter 04-30-2023 08:29 PM

Re: What Radiator?
 
I bought an eBay special back in 2018. Has been working great cooling the big block ever since.


https://www.ebay.com/itm/161604421849

HO455 05-01-2023 08:38 AM

Re: What Radiator?
 
Quote:

Originally Posted by PbFut (Post 9200676)
Be cautious when inspecting the fit of the aluminum radiators into the 4 core mounts. The rubber liner on the mounts will compress enough the it can allow contact of radiator with the edge of the mount. I found this on my 4 row Champion. The hard edge of the mount will saw a hole over time. Best test, though not 100% perfect, is do a continuity test on the radiator to the radiator support before any lines are connected. If you have an open circuit you have good indication there is no metal to metal contact that could wear a hole over time.

Clever idea.


All times are GMT -4. The time now is 08:10 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com