The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (
-   -   CO Tilt column (

clay68c10 02-09-2020 02:08 PM

Tilt column
5 Attachment(s)

$425 local, $475 shipped.

Please respond in thread only per board rules, first "I'll take it" gets it.

Selling a painted and converted motorhome tilt column. From a mid 80s GM chassis

It has the straight shifter arm like a truck tilt

Also has the metal gear indicator

I moved the NSS down so it's a bolt-in for your 67-72; I used my multi-meter to adjust it, you may need to fine tune it after install.

Turn signal and tilt levers are new from GMC Pauls

Turn signal switch is new

Includes the cancel cam

The gray illumination wire is full length with the green end

Includes a long pigtail for the Neutral Safety/Reverse switch

Tilt mechanism is tight and smooth.

The 4 bolts in the tilt mechanism that typically loosen over time have been removed and reinstalled with lock-tight.

Tilt pivots were cleaned and lubed when removed to tighten the bolts.

The bottom bearing was cleaned and greased

The upper bearings were cleaned and greased

The shift indicator bulb was replaced and tested OK, it has the green shade on it.

Shifter lever end (inside column) is good, pivot is good

Shift arm has nice chrome, it shines up well.

The finish on it is base/clear coat gloss black.

The shift arm is metallic silver and includes the rubber bushing and metal sleeve

New firewall and dash gaskets from GMC Pauls

I will include a new GMC Paul's gear indicator

Also can swap out the indicator lens for an OD version at the same price

You will need to add your metal firewall plate.

clay68c10 02-09-2020 02:12 PM

Re: Tilt column
4 Attachment(s)
More pics

clay68c10 02-09-2020 02:15 PM

Re: Tilt column
1 Attachment(s)
Last one

SoCoC10 02-09-2020 02:41 PM

Re: Tilt column
I’m happy w/my tilt Clay restored. This shouldn’t last long. A great buy!

clay68c10 02-09-2020 02:43 PM

Re: Tilt column
Thanks Troy
Are you sure you don't need a pretty one??;)

robpp 02-10-2020 03:10 PM

Re: Tilt column
im looking for a tilt floor shift for my 70 C10, local to you.


4x41971SWB 02-10-2020 03:26 PM

Re: Tilt column
I'll take it

clay68c10 02-10-2020 03:57 PM

Re: Tilt column
Sold to 4x41971swb
PM sent

4x41971SWB 02-10-2020 04:38 PM

Re: Tilt column

Originally Posted by clay68c10 (Post 8676130)
Sold to 4x41971swb
PM sent

Payment sent.
3 speed indicator

4x41971SWB 02-19-2020 11:45 AM

Re: Tilt column
Recieved this the other day and opened it up last night.
All I can say is WOW!!
It looks amazing and thank you for the more than fair price!

clay68c10 02-20-2020 04:51 PM

Re: Tilt column
My pleasure. I can’t take all the credit, my buddy Dave does great paint work.

All times are GMT -4. The time now is 02:12 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Copyright 1997-2020