The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 11 of 19 « First 678910 11 1213141516 Last »
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Suspension Marketplace (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=210)
-   -   1960-1972 Lowering Block U bolts (https://67-72chevytrucks.com/vboard/showthread.php?t=454824)

KMC3420 08-31-2013 12:36 PM
Quote:
Originally Posted by 68_chop_top (Post 6246881)
I have a set of 1" u bolts with nuts and washers I bought from Boris, I replaced them with a set of 2" u bolts from him also. Will sell 1" u bolts, nuts, and washers for $25. Should ship for $5 easy to any where. coy.rice@luminant.com using paypal.
Posted via Mobile Device

w4625 08-31-2013 03:31 PM
Re: 1960-1972 Lowering Block U bolts
 
needing a set of 1.5" u bolts

1964Chevy 09-04-2013 01:59 PM
Re: 1960-1972 Lowering Block U bolts
 
Pm sent.
Posted via Mobile Device

w4625 09-05-2013 11:51 AM
Re: 1960-1972 Lowering Block U bolts
 
I went to my neighborhood O'reilly's and guess what..they stock u-bolts! So I bought a pair.

way2lo2 09-11-2013 09:00 AM
Re: 1960-1972 Lowering Block U bolts
 
Just read the thread that some of you guys PM'd me with no reply. For some reason I wasn't getting notifications that there was any messages. My email address, shop number, and mobile number are in my signature. If the message gets to me, I always reply within minutes.

KMC3420 09-13-2013 09:49 AM
Re: 1960-1972 Lowering Block U bolts
 
Quote:
Originally Posted by way2lo2 (Post 6263845)
Just read the thread that some of you guys PM'd me with no reply. For some reason I wasn't getting notifications that there was any messages. My email address, shop number, and mobile number are in my signature. If the message gets to me, I always reply within minutes.
How much for 1" drop blocks plus the ubolts shipped to 72601? Thanks.

way2lo2 09-13-2013 09:50 AM
Re: 1960-1972 Lowering Block U bolts
 
Quote:
Originally Posted by KMC3420 (Post 6267166)
How much for 1" drop blocks plus the ubolts shipped to 72601? Thanks.
$69.95 shipped priority mail

KMC3420 09-14-2013 02:13 PM
Quote:
Originally Posted by way2lo2 (Post 6267168)
$69.95 shipped priority mail
PM me some payment info please.
Posted via Mobile Device

runningiron 09-27-2013 09:23 AM
Re: 1960-1972 Lowering Block U bolts
 
Boris,
I need a set of 1 1/2" blocks and u-bolts shipped to 85123. Please send me payment info. Thanks
Runningiron

way2lo2 09-27-2013 09:30 AM
Re: 1960-1972 Lowering Block U bolts
 
Quote:
Originally Posted by runningiron (Post 6288066)
Boris,
I need a set of 1 1/2" blocks and u-bolts shipped to 85123. Please send me payment info. Thanks
Runningiron
only doing the 1 or 2 inch anymore, they are 69.95 for forum members includes u bolts, hardware, and priority shipping

runningiron 09-27-2013 09:43 AM
Re: 1960-1972 Lowering Block U bolts
 
Boris, If I use a 3" dropped coil and the 2" blocks, will I need to install a c-notch in a 66 C-10 1/2 ton stepside? Runningiron

way2lo2 09-27-2013 09:45 AM
Re: 1960-1972 Lowering Block U bolts
 
Quote:
Originally Posted by runningiron (Post 6288082)
Boris, If I use a 3" dropped coil and the 2" blocks, will I need to install a c-notch in a 66 C-10 1/2 ton stepside? Runningiron
yep if you don't want it to bang your frame on every bump

runningiron 09-27-2013 09:51 AM
Re: 1960-1972 Lowering Block U bolts
 
Ok thanks for the info. I'll take a set of 2" blocks and u-bolts to 85123 and I am a member. PM payment info. Thanks

way2lo2 09-27-2013 10:10 AM
Re: 1960-1972 Lowering Block U bolts
 
Quote:
Originally Posted by runningiron (Post 6288093)
Ok thanks for the info. I'll take a set of 2" blocks and u-bolts to 85123 and I am a member. PM payment info. Thanks
Paypal Way2Lo2@aol.com
thanks!!

runningiron 09-27-2013 10:21 AM
Re: 1960-1972 Lowering Block U bolts
 
Thanks Boris. Paypal payment sent

tallic68 10-01-2013 12:57 PM
Re: 1960-1972 Lowering Block U bolts
 
ill take 2" blocks and u bolts for 68
please send payment info

mike

ulakovic22 10-08-2013 12:29 PM
Re: 1960-1972 Lowering Block U bolts
 
PM sent

ulakovic22 10-08-2013 01:59 PM
Re: 1960-1972 Lowering Block U bolts
 
Thanks, payment sent!

jhama78 10-14-2013 12:58 PM
Re: 1960-1972 Lowering Block U bolts
 
You said that you aren't doing 1.5" blocks any longer and 2" blocks wont work with 15" wheels correct?

way2lo2 10-14-2013 01:31 PM
Re: 1960-1972 Lowering Block U bolts
 
Quote:
Originally Posted by jhama78 (Post 6314474)
You said that you aren't doing 1.5" blocks any longer and 2" blocks wont work with 15" wheels correct?
2" will work fine, I wouldn't go more then 2"

runningiron 10-14-2013 02:05 PM
Re: 1960-1972 Lowering Block U bolts
 
way2lo2, I just started to lower my 66 C-10. I have 3" lowered coils in the rear right now. I have some 2" lowered blocks that I had hoped to install to have a total drop of 5" in the rear. I have 2 1/2" dropped spindles for the front and 2" dropped front coils yet to be installed. I have 15" wheels right now. Is it not recommended to use the 2" blocks with the 15" wheels? What size wheels are recommended? Runningiron

jhama78 10-14-2013 03:06 PM
Re: 1960-1972 Lowering Block U bolts
 
Quote:
Originally Posted by way2lo2 (Post 6314529)
2" will work fine, I wouldn't go more then 2"
OK thanks for the info, I'll be in touch.

Vova 10-19-2013 07:49 AM
Re: 1960-1972 Lowering Block U bolts
 
Pm sent.

sduckworth13 10-22-2013 12:52 AM
Re: 1960-1972 Lowering Block U bolts
 
I'll take a set of 2" blocks and u-bolts to KCMO 64118. PM payment info.

Thanks
Scott

sduckworth13 10-22-2013 09:04 AM
Re: 1960-1972 Lowering Block U bolts
 
Paypal sent. Thank you Boris for the quick response and the tracking number.


All times are GMT -4. The time now is 04:06 AM.
Page 11 of 19 « First 678910 11 1213141516 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com