The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   71 Front Brake Hose (https://67-72chevytrucks.com/vboard/showthread.php?t=773380)

rcazwillis 10-15-2018 09:53 PM

71 Front Brake Hose
 
How long is a front brake hose for a 71? Napa hose was too short, data shows 11.5". Every vendor shows 11.5" I know the 71-72 hoses are longer due to tab location. Does anyone have a part number that worked on their 71-72.

71meangreenc10 10-15-2018 10:12 PM

Re: 71 Front Brake Hose
 
Call Inline Tube. Just picked up a set from them and they work well.

Smitty

Lanman1972 10-16-2018 08:51 AM

Re: 71 Front Brake Hose
 
I think the 2 sides are different lengths. I also got mine from Napa and for what ever reason I had to switch them from one side to the other because the part numbers were not correct, or something like that.

GMCPaul 10-16-2018 09:40 AM

Re: 71 Front Brake Hose
 
Quote:

Originally Posted by rcazwillis (Post 8365309)
How long is a front brake hose for a 71? Napa hose was too short, data shows 11.5". Every vendor shows 11.5" I know the 71-72 hoses are longer due to tab location. Does anyone have a part number that worked on their 71-72.

Well by measuring a new set I get one side is
12" from end of hose that connects to brake line to center of banjo bolt hole,
the other side is
12 1/2" total length from end that connects to brake line of hose to end of banjo fitting.
The 3/4 ton hoses are approx. 1" longer per side.
Sorry I don't remember whether the Left drivers side or the Right passenger side is the longer hose at the moment without checking that's installed.
Paul Jr @ GMCPauls

71meangreenc10 10-16-2018 10:36 AM

Re: 71 Front Brake Hose
 
You cannot put the hoses on the wrong sides. The nuts on the metal lines are two different sizes. The last rubber lines I ordered from rock auto also for a 1/2 ton worked but they were from china. Are you putting these on a conversion or a 71/72?

Smitty

rcazwillis 10-16-2018 09:05 PM

Re: 71 Front Brake Hose
 
Going on a 71. Foolishly disposed of old lines so can't compare. Napa part would not reach from caliper to hard line.
Thanks for measurements


All times are GMT -4. The time now is 10:16 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com