The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   Rear cab mount replacement (https://67-72chevytrucks.com/vboard/showthread.php?t=806596)

Dmax21 05-20-2020 09:38 PM

Rear cab mount replacement
 
Does anyone know if you can get a rear cab mount replacement piece for an 86 c10? I'm talking about the piece that is attached to the rear of the cab and it goes full length left to right, mine has 2 placed close to the cab mounts that getting pretty bad.

Dmax21 05-21-2020 11:06 AM

Re: Rear cab mount replacement
 
2 Attachment(s)
Has anyone ever had this problem? It's basically the only rust I have except cab corners.

1774btcrew 05-21-2020 12:47 PM

Re: Rear cab mount replacement
 
you will have to get a used one. I can check on a floor piece I have and see if it was cut out with it.

Dmax21 05-21-2020 01:16 PM

Re: Rear cab mount replacement
 
That would be great.

Dmax21 05-25-2020 11:50 PM

Re: Rear cab mount replacement
 
Has no one else had this problem?

1774btcrew 05-26-2020 09:06 AM

Re: Rear cab mount replacement
 
I took pictures of the one I have. If you want to send me a private message

Nachos82 05-28-2020 04:16 PM

Re: Rear cab mount replacement
 
Dmax21,

My truck cab has a rusty/rotten section as well in the rear cab mount area. Seems like there isn't a reproduction chunk being made to replace it that I can find.

Maybe they figure if it is bad back there, the rest of the cab isn't much better. In my case they are totally right, as I think a rust free cab would be best for me in the long run.

1774btcrew 06-26-2020 07:03 PM

Re: Rear cab mount replacement
 
Quote:

Originally Posted by Nachos82 (Post 8747823)
Dmax21,

My truck cab has a rusty/rotten section as well in the rear cab mount area. Seems like there isn't a reproduction chunk being made to replace it that I can find.

Maybe they figure if it is bad back there, the rest of the cab isn't much better. In my case they are totally right, as I think a rust free cab would be best for me in the long run.

If you decide to try and replace the mount let me know. I have one and the original poster wasn't interested. It is a clean rust free AZ Part


All times are GMT -4. The time now is 12:04 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com